Equivalent & Substitute Parts for 22201C105MAT1A

Part Overview

The 22201C105MAT1A is a 1 µF ±20% 100V ceramic capacitor manufactured by KYOCERA AVX in the 2220 (5750 Metric) surface mount package. This X7R temperature coefficient component operates across -55°C to 125°C and is classified as Active product status with ROHS3 compliance. Substitute parts are identified when equivalent electrical performance is required due to inventory constraints, design optimization, or application-specific requirements while maintaining the same physical footprint and mounting characteristics.

Substiute Parts

22201C105MAT1A

KYOCERA AVXIn Stock: 115422201C105MAT1A Datasheet

Current PartRFQ

2220PC105KAT1A

KYOCERA AVXIn Stock: 21862220PC105KAT1A Datasheet

UpgradeRFQ

C5750X7R2A105M230KA

TDK CorporationIn Stock: 88445C5750X7R2A105M230KA Datasheet

DirectRFQ

C2220C105K1RAC7800

KEMETIn Stock: 2637C2220C105K1RAC7800 Datasheet

UpgradeRFQ

C2220C105K2RAC7800

KEMETIn Stock: 1328C2220C105K2RAC7800 Datasheet

UpgradeRFQ

C2220C105KARAC7800

KEMETIn Stock: 1142C2220C105KARAC7800 Datasheet

UpgradeRFQ

C5750X7R2A105K230KA

TDK CorporationIn Stock: 2648C5750X7R2A105K230KA Datasheet

UpgradeRFQ

C5750X7R2E105K230KA

TDK CorporationIn Stock: 1787C5750X7R2E105K230KA Datasheet

UpgradeRFQ

GRM55DR72E105KW01L

Murata ElectronicsIn Stock: 16168GRM55DR72E105KW01L Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Compatibility Requirements:

• Identical capacitance value: 1 µF
• Identical package / case: 2220 (5750 Metric)
• Identical mounting type: Surface Mount, MLCC
• Identical temperature coefficient: X7R
• Identical operating temperature range: -55°C to 125°C
• Identical moisture sensitivity level: 1 (Unlimited)

Allowable Variations:

• Tolerance: May upgrade from ±20% to ±10% (tighter tolerance acceptable)
• Voltage rating: May upgrade to higher voltage ratings (100V, 200V, or 250V acceptable)
• Manufacturer: Different manufacturers acceptable if all electrical and mechanical parameters match
• Product status: Active status preferred; "Not For New Designs" acceptable for legacy applications

Substitute parts are grouped into two categories: Upgrade parts (improved tolerance or voltage rating) and Direct parts (identical electrical specifications from alternative manufacturers).

Parameter Comparison

Engineering Selection Recommendations

For Active Product Status Applications: Select from parts with Active product status when designing new systems: 2220PC105KAT1A (KYOCERA AVX), C2220C105K1RAC7800 (KEMET), C2220C105K2RAC7800 (KEMET), C2220C105KARAC7800 (KEMET), C5750X7R2E105K230KA (TDK Corporation), or GRM55DR72E105KW01L (Murata Electronics). These parts ensure long-term availability and manufacturer support.

For Tolerance Upgrade: Parts with ±10% tolerance (2220PC105KAT1A, C2220C105K1RAC7800, C2220C105K2RAC7800, C2220C105KARAC7800, C5750X7R2A105K230KA, C5750X7R2E105K230KA, GRM55DR72E105KW01L) provide tighter capacitance accuracy compared to the original ±20% specification.

For Voltage Rating Upgrade: Parts rated at 200V or 250V (2220PC105KAT1A, C2220C105K2RAC7800, C2220C105KARAC7800, C5750X7R2E105K230KA, GRM55DR72E105KW01L) provide increased voltage margin for applications requiring higher reliability or operating in elevated voltage environments.

For Legacy Applications: Parts with "Not For New Designs" status (C5750X7R2A105M230KA, C5750X7R2A105K230KA) are acceptable for sustaining production or replacement in existing designs but should not be selected for new development.

Compliance Verification: All listed substitute parts maintain ROHS3 compliance, REACH Unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring regulatory and environmental compatibility with the original part.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 250V rated capacitor for a 100V rated capacitor? A: Yes. A higher voltage rating is a direct upgrade and maintains all electrical performance characteristics. The 22201C105MAT1A (100V) can be replaced with 2220PC105KAT1A, C2220C105K2RAC7800, C2220C105KARAC7800, C5750X7R2E105K230KA, or GRM55DR72E105KW01L (all 250V rated).

Q: What is the difference between ±20% and ±10% tolerance? A: Tolerance specifies the allowable deviation from the nominal 1 µF capacitance value. ±20% allows deviation from 0.8 µF to 1.2 µF, while ±10% allows deviation from 0.9 µF to 1.1 µF. Tighter tolerance (±10%) is acceptable as a substitute for looser tolerance (±20%).

Q: Are all substitute parts physically identical? A: All substitute parts use the identical 2220 (5750 Metric) package with 0.224" L × 0.197" W footprint. Thickness varies between 0.065" (1.65mm) and 0.098" (2.50mm) depending on manufacturer and voltage rating. Verify PCB clearance if thickness is critical for your application.

Q: Can I use a part with "Not For New Designs" status? A: Parts marked "Not For New Designs" (C5750X7R2A105M230KA, C5750X7R2A105K230KA) are acceptable for sustaining production or replacement in existing designs. For new product development, select from parts with Active status.

Q: Do all substitute parts have the same moisture sensitivity level? A: Yes. All listed substitute parts maintain MSL 1 (Unlimited), indicating no moisture sensitivity restrictions and no baking requirement prior to soldering.

Q: Which substitute offers the best inventory availability? A: GRM55DR72E105KW01L (Murata Electronics) has the highest inventory at 16,156 pieces, followed by C5750X7R2A105M230KA (TDK Corporation) at 88,368 pieces. Both are suitable alternatives with full electrical compatibility.