Bourns 2214-H 150µH Shielded Toroidal Inductor Equivalent & Substitute Parts

Part Overview

The Bourns 2214-H is a 150µH shielded toroidal inductor rated for 3.1A continuous current with a maximum DC resistance of 110mOhm. This through-hole component features an iron powder core and is designed for radial, horizontal mounting in applications requiring controlled inductance with electromagnetic shielding.

The 2214-H carries an obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or repair requirements for systems utilizing this component.

Substiute Parts

2214-H

Bourns Inc.In Stock: 9252214-H Datasheet

Current PartRFQ

2214-H-RC

Bourns Inc.In Stock: 10022214-H-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2214-H is determined by strict equivalence across the following critical parameters:

• Inductance Value: 150 µH (±15% tolerance)
• Current Rating: 3.1 A minimum
• DC Resistance: 110 mOhm maximum
• Core Type: Iron powder shielded construction
• Mounting Configuration: Through-hole, radial horizontal orientation
• Operating Temperature: -55°C to 105°C range
• Physical Dimensions: 0.950" diameter, 0.550" maximum seated height

The 2214-H-RC meets all these criteria and is classified as a direct substitute. Both parts share identical electrical specifications, core material, shielding characteristics, and mechanical form factor. The primary distinction is product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The 2214-H-RC is the direct equivalent for the obsolete 2214-H. Both components are manufactured by Bourns Inc. within the 2200 series and maintain identical electrical and mechanical specifications.

Selection between these parts should be based on the following factors:

For new designs or production requiring regulatory compliance: The 2214-H-RC is the appropriate choice. It carries active product status and meets ROHS3 compliance requirements, ensuring long-term availability and regulatory alignment.

For legacy system maintenance or repair: Either part is electrically and mechanically interchangeable. The 2214-H-RC provides the same performance characteristics as the original 2214-H while offering improved compliance status.

Availability considerations: The 2214-H-RC is currently in active production with confirmed inventory (954 pcs), whereas the 2214-H is obsolete. For ongoing supply requirements, the 2214-H-RC is the recommended selection.

Both parts carry identical REACH and ECCN classifications (EAR99) and share the same HTSUS code (8504.50.4000).

Frequently Asked Questions (FAQ)

Q: Can the 2214-H-RC be used as a direct replacement for the 2214-H in existing circuits?

A: Yes. The 2214-H-RC is electrically and mechanically identical to the 2214-H. All electrical parameters (inductance, current rating, DC resistance), core material, shielding, mounting type, and physical dimensions are equivalent. No circuit modifications are required.

Q: What is the difference between the 2214-H and 2214-H-RC?

A: The primary differences are product status and packaging. The 2214-H is obsolete, while the 2214-H-RC is active. The 2214-H-RC is supplied in bulk packaging and meets ROHS3 compliance, whereas the 2214-H is non-compliant. Electrical and mechanical specifications are identical.

Q: Are there any compliance or regulatory differences between these parts?

A: Yes. The 2214-H-RC meets ROHS3 compliance requirements, while the 2214-H does not. Both parts are REACH unaffected and carry the same EAR99 ECCN classification. For applications subject to RoHS regulations, the 2214-H-RC is the appropriate selection.

Q: What packaging options are available?

A: The 2214-H was supplied in standard packaging (status now obsolete). The 2214-H-RC is supplied in bulk packaging. Both maintain the same radial, horizontal (open) form factor and through-hole mounting configuration.

Q: Can I use these inductors in high-frequency applications?

A: These components are specified at 1 kHz inductance test frequency. Self-resonant frequency data is not provided in the component specifications. Frequency-dependent performance should be verified against your specific application requirements.

Q: What is the tolerance range for the 150µH inductance value?

A: The inductance tolerance is ±15%, resulting in a specified range of 127.5µH to 172.5µH at the 1 kHz test frequency.