2200HT-120-H Equivalent & Substitute Parts

Part Overview

The Bourns 2200HT-120-H is a 12 µH shielded toroidal inductor rated for 10.9 A continuous current with a maximum DC resistance of 15 mOhm. This through-hole component features an iron powder core and operates across the temperature range of -55°C to 200°C. The part is currently classified as obsolete, making identification of compatible alternatives essential for ongoing production support and design continuity.

Substiute Parts

2200HT-120-H

Bourns Inc.In Stock: 11412200HT-120-H Datasheet

Current PartRFQ

2200HT-120-H-RC

Bourns Inc.In Stock: 8002200HT-120-H-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2200HT-120-H is determined by strict equivalence across the following critical parameters:

• Inductance value: 12 µH
• Inductance tolerance: ±15%
• Current rating: 10.9 A minimum
• DC resistance: 15 mOhm maximum
• Core material: Iron Powder
• Shielding configuration: Shielded
• Mounting interface: Through Hole
• Package geometry: Radial, Horizontal (Open)
• Physical dimensions: 0.950" diameter, 0.550" height maximum
• Operating temperature range: -55°C to 200°C minimum

The 2200HT-120-H-RC meets all substitution criteria as a direct equivalent within the same 2200HT series from Bourns Inc.

Parameter Comparison

Engineering Selection Recommendations

The 2200HT-120-H-RC is the direct functional equivalent of the obsolete 2200HT-120-H. Both components share identical electrical specifications and physical dimensions, ensuring pin-for-pin and form-factor compatibility in existing circuit designs.

The primary distinction between these parts is product lifecycle status and regulatory compliance. The 2200HT-120-H-RC carries Active product status and ROHS3 compliance certification, whereas the main part is classified as Obsolete and RoHS non-compliant. For new designs or production continuity, the 2200HT-120-H-RC is the appropriate selection.

Packaging differs between the two variants: the main part is supplied in bulk format, while the substitute is provided in tray packaging. This distinction affects handling and inventory management but does not impact electrical or mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can the 2200HT-120-H-RC be used as a direct replacement for the 2200HT-120-H?

A: Yes. Both components are electrically and mechanically identical. The 2200HT-120-H-RC provides the same inductance value (12 µH), current rating (10.9 A), DC resistance (15 mOhm maximum), core material (iron powder), shielding configuration, and physical dimensions. PCB layout and circuit design modifications are not required.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and compliance certification. The 2200HT-120-H is obsolete and RoHS non-compliant. The 2200HT-120-H-RC is an active product with ROHS3 compliance. Additionally, packaging format differs: bulk versus tray. Electrical and mechanical specifications are identical.

Q: Does the packaging format affect component performance?

A: No. Packaging format (bulk versus tray) is a supply and handling consideration only. It does not affect the electrical characteristics, mechanical properties, or performance of the inductor in circuit operation.

Q: Are there any temperature or frequency limitations I should consider?

A: Both components operate identically across the temperature range of -55°C to 200°C. Inductance is specified at a test frequency of 1 kHz. No additional limitations apply beyond the provided specifications.

Q: Is the 2200HT-120-H-RC suitable for new product designs?

A: Yes. The 2200HT-120-H-RC is classified as an active product with current manufacturer support and ROHS3 compliance, making it the appropriate choice for new designs requiring a 12 µH shielded toroidal inductor with 10.9 A current rating and iron powder core construction.