TE Connectivity 2176487-2 Ferrite Bead Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176487-2 is a 60 Ohm signal line ferrite bead in 0805 (2012 Metric) surface mount package, rated for 3A maximum current with 40mOhm DC resistance. This component operates across the temperature range of -55°C to 125°C and is ROHS3 compliant. The part is currently active in production with 1014 units in stock.

Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific performance requirements where parametric variations are acceptable within system design tolerances.

Key Parameters

Parameter	Value
Manufacturer Part Number	2176487-2
Manufacturer	TE Connectivity Passive Product
Series	BMC
Product Status	Active
Filter Type	Signal Line
Number of Lines	1
Impedance @ Frequency	60 Ohms @ 100 MHz
Current Rating (Max)	3A
DC Resistance (DCR) (Max)	40mOhm
Operating Temperature	-55°C ~ 125°C
Package / Case	0805 (2012 Metric)
Mounting Type	Surface Mount
Height (Max)	0.043" (1.10mm)
Size / Dimension	0.079" L x 0.049" W (2.00mm x 1.25mm)
RoHS Status	ROHS3 Compliant
REACH Status	REACH Unaffected
Packaging	Cut Tape (CT)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

Primary Matching Criteria:

Package / Case: 0805 (2012 Metric)
Mounting Type: Surface Mount
Operating Temperature: -55°C ~ 125°C
RoHS Status: ROHS3 Compliant

Secondary Compatibility Parameters:

Impedance @ Frequency: 60 Ohms @ 100 MHz (primary specification)
Current Rating (Max): 3A or higher
DC Resistance (DCR) (Max): 40mOhm or lower
Number of Lines: 1

Substitute parts are grouped into two categories:

Category A - Direct Parametric Equivalents: Parts matching impedance (60 Ohms @ 100 MHz), current rating (3A), and DCR (40mOhm or lower) specifications.

Category B - Enhanced Performance Substitutes: Parts with impedance at 60 Ohms @ 100 MHz but with higher current ratings (6A) or lower DCR values, providing superior electrical performance within the same package footprint.

Category C - Near-Equivalent Substitutes: Parts with slight impedance variations (50 Ohm or 70 Ohm) or different filter type classifications (Power Line vs. Signal Line) that maintain mechanical and thermal compatibility.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Impedance @ Frequency	Current Rating (Max)	DC Resistance (Max)	Filter Type	Package / Case	Operating Temperature	RoHS Status	Packaging	Inventory
2176487-2	TE Connectivity Passive Product	60 Ohms @ 100 MHz	3A	40mOhm	Signal Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Cut Tape (CT)	1014 Pcs
2508056007Y3	Fair-Rite Products Corp.	60 Ohms @ 100 MHz	3A	40mOhm	Signal Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Tape & Reel (TR)	36300 Pcs
2508056007Y6	Fair-Rite Products Corp.	60 Ohms @ 100 MHz	6A	20mOhm	Signal Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Tape & Reel (TR)	224938 Pcs
742792063	Würth Elektronik	60 Ohms @ 100 MHz	3A	25mOhm	Signal Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Tape & Reel (TR)	6532 Pcs
BBPY00201209500Y00	Pulse Electronics	50 Ohms @ 100 MHz	3A	25mOhm	Signal Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Tape & Reel (TR)	16269 Pcs
BBPY00201209600Y00	Pulse Electronics	60 Ohms @ 100 MHz	3A	30mOhm	Signal Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Tape & Reel (TR)	49011 Pcs
BBPY00201209700Y00	Pulse Electronics	70 Ohms @ 100 MHz	3A	40mOhm	Signal Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Tape & Reel (TR)	24068 Pcs
BBUP00201209500Y00	Pulse Electronics	50 Ohms @ 100 MHz	6A	15mOhm	Signal Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Tape & Reel (TR)	2877 Pcs
BLM21PG600SN1D	Murata Electronics	60 Ohms @ 100 MHz	3.5A	20mOhm	Power Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Cut Tape (CT) & Digi-Reel®	205400 Pcs
CZP2AFTTD600P	KOA Speer Electronics, Inc.	60 Ohms @ 100 MHz	3A	40mOhm	Power Line	0805 (2012 Metric)	-55°C ~ 125°C	ROHS3 Compliant	Tape & Reel (TR)	4317 Pcs
FBH201209T-500Y-S	Cal-Chip Electronics, Inc.	50 Ohms @ 100 MHz	3A	30mOhm	Power Line	0805 (2012 Metric)	-55°C ~ 125°C	RoHS Compliant	Tape & Reel (TR)	40659 Pcs

Engineering Selection Recommendations

Category A - Direct Parametric Equivalents (Recommended Primary Substitutes)

The following parts provide identical electrical specifications to the TE Connectivity 2176487-2:

2508056007Y3 (Fair-Rite Products Corp.): Matches all primary electrical parameters with 36,300 units in stock. Available in Tape & Reel packaging. ROHS3 compliant with MSL 1 rating.
742792063 (Würth Elektronik, WE-CBF Series): Matches impedance, current rating, and operating temperature. DC resistance of 25mOhm provides improved performance margin. ROHS3 compliant with MSL 1 rating. 6,532 units available.
BBPY00201209600Y00 (Pulse Electronics, BBPY Series): Matches 60 Ohms @ 100 MHz impedance and 3A current rating. DC resistance of 30mOhm is within specification. ROHS3 compliant with MSL 1 rating. 49,011 units in stock.
CZP2AFTTD600P (KOA Speer Electronics, CZP Series): Matches all primary electrical specifications. Classified as Power Line filter type. ROHS3 compliant with MSL 1 rating. 4,317 units available.

Category B - Enhanced Performance Substitutes

These parts exceed the original specification in current handling or DC resistance performance:

2508056007Y6 (Fair-Rite Products Corp.): Provides 6A current rating (double the original 3A) with 20mOhm DC resistance (half the original 40mOhm). Maintains 60 Ohms @ 100 MHz impedance. 224,938 units in stock. Suitable for applications requiring higher current capacity or lower insertion loss.
BLM21PG600SN1D (Murata Electronics, EMIFIL® BLM21 Series): Provides 3.5A current rating with 20mOhm DC resistance. Maintains 60 Ohms @ 100 MHz impedance. 205,400 units in stock. Available in Cut Tape packaging matching original part format. ROHS3 compliant with MSL 1 rating.

Category C - Near-Equivalent Substitutes (Impedance Variation)

These parts maintain mechanical and thermal compatibility with impedance variations:

BBPY00201209500Y00 (Pulse Electronics, BBPY Series): 50 Ohms @ 100 MHz impedance with 3A current rating and 25mOhm DC resistance. 16,269 units in stock. Suitable for applications where 50 Ohm impedance is acceptable.
BBPY00201209700Y00 (Pulse Electronics, BBPY Series): 70 Ohms @ 100 MHz impedance with 3A current rating and 40mOhm DC resistance. 24,068 units in stock. Suitable for applications where 70 Ohm impedance is acceptable.
BBUP00201209500Y00 (Pulse Electronics, BBUP Series): 50 Ohms @ 100 MHz impedance with 6A current rating and 15mOhm DC resistance. 2,877 units in stock. Provides enhanced performance with lower impedance specification.
FBH201209T-500Y-S (Cal-Chip Electronics, FBH Series): 50 Ohms @ 100 MHz impedance with 3A current rating and 30mOhm DC resistance. 40,659 units in stock. Classified as Power Line filter type. RoHS Compliant with MSL 1 rating.

Compliance and Certification Status

All substitute parts maintain ROHS3 compliance and REACH Unaffected status consistent with the original TE Connectivity 2176487-2. All parts operate within the -55°C to 125°C temperature range. Moisture Sensitivity Level 1 (Unlimited) is specified for all substitute parts with available MSL data, indicating no moisture sensitivity constraints.

Frequently Asked Questions (FAQ)

Q: Can I use Fair-Rite 2508056007Y3 as a direct replacement for TE Connectivity 2176487-2?

A: Yes. The 2508056007Y3 provides identical electrical specifications: 60 Ohms @ 100 MHz impedance, 3A current rating, and 40mOhm maximum DC resistance. Both parts are ROHS3 compliant and operate across -55°C to 125°C. The primary difference is packaging format (Tape & Reel vs. Cut Tape) and manufacturer. Verify your assembly process accommodates the packaging format.

Q: What is the advantage of using Fair-Rite 2508056007Y6 over the original TE Connectivity part?

A: The 2508056007Y6 provides enhanced electrical performance with 6A current rating (versus 3A) and 20mOhm DC resistance (versus 40mOhm). This results in lower insertion loss and higher current capacity. The impedance remains 60 Ohms @ 100 MHz. Use this part when your application requires higher current handling or lower signal attenuation.

Q: Can I substitute a 50 Ohm ferrite bead for the 60 Ohm specification?

A: Substitution with 50 Ohm impedance parts (BBPY00201209500Y00, BBUP00201209500Y00, or FBH201209T-500Y-S) is possible only if your circuit design tolerates the impedance variation. The 10 Ohm difference may affect EMI filtering performance. Verify impedance requirements in your application schematic before substitution.

Q: What is the difference between Signal Line and Power Line ferrite beads?

A: The original TE Connectivity 2176487-2 is classified as a Signal Line ferrite bead. Substitute parts BLM21PG600SN1D and CZP2AFTTD600P are classified as Power Line ferrite beads. Both types maintain identical electrical specifications (60 Ohms @ 100 MHz, 3A or higher current rating, 40mOhm or lower DC resistance) and 0805 package format. Power Line classification indicates suitability for higher current applications. Verify your circuit application requirements before substitution.

Q: Does packaging format (Cut Tape vs. Tape & Reel) affect electrical performance?

A: No. Packaging format does not affect electrical performance. The difference is in supply and handling format. Cut Tape (CT) is supplied in individual strips, while Tape & Reel (TR) is supplied on continuous reels for automated assembly. Verify your assembly equipment compatibility with the packaging format.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant, matching the compliance status of the original TE Connectivity 2176487-2. All parts are REACH Unaffected. Moisture Sensitivity Level 1 (Unlimited) is specified for all parts with available MSL data.

Q: Can I use Murata BLM21PG600SN1D as a substitute?

A: Yes. The BLM21PG600SN1D provides 60 Ohms @ 100 MHz impedance with 3.5A current rating and 20mOhm DC resistance. It is ROHS3 compliant and operates across -55°C to 125°C. The primary difference is manufacturer and filter type classification (Power Line vs. Signal Line). This part offers improved DC resistance performance and is available in Cut Tape packaging format matching the original part.

Q: What is the maximum DC resistance acceptable for substitution?

A: The original TE Connectivity 2176487-2 specifies 40mOhm maximum DC resistance. Substitute parts with DC resistance at or below 40mOhm (2508056007Y3, 2508056007Y6, 742792063, BBPY00201209600Y00, BLM21PG600SN1D, CZP2AFTTD600P) are directly compatible. Parts with lower DC resistance (20mOhm to 30mOhm) provide improved performance. Parts with higher DC resistance should be evaluated against your circuit insertion loss requirements.

Q: What is the current rating requirement for my application?

A: The original TE Connectivity 2176487-2 is rated for 3A maximum current. If your application requires higher current handling, substitute parts with 6A ratings (2508056007Y6, BBUP00201209500Y00) or 3.5A ratings (BLM21PG600SN1D) provide enhanced performance. Verify your actual circuit current requirements before selecting a substitute part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message