TE Connectivity AMP Connectors 2-1761614-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-1761614-0 is a 200 Signal (100 Pair) Position Connector Differential Pair Array in the STEP-Z series. This male surface mount connector features gold-plated contacts and is designed for high-density differential signaling applications. The part is currently active in production and available in tray packaging with 1000 pieces in stock.

Substitute parts are identified when electrical and mechanical parameters align with the original specification, enabling direct replacement in applications where component availability, compliance requirements, or inventory considerations necessitate alternative sourcing.

Substiute Parts

2-1761614-0

TE Connectivity AMP ConnectorsIn Stock: 10622-1761614-0 Datasheet

Current PartRFQ

7-1761614-0

TE Connectivity AMP ConnectorsIn Stock: 23007-1761614-0 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2-1761614-0 is determined by strict equivalence across the following critical parameters:

• Connector Type: Differential Pair Array, Male configuration
• Position Count: 200 Signal (100 Pair) positions
• Pitch: 0.051" (1.30mm) contact spacing
• Row Configuration: 18 rows
• Mounting Technology: Surface Mount (SMD)
• Contact Material & Finish: Gold plating at 30.0µin (0.76µm) thickness
• Physical Dimensions: Height above board of 0.825" (20.95mm) and compatible mated stacking heights (25mm, 31mm, 35mm)
• Moisture Sensitivity: MSL 1 rating

The substitute part 7-1761614-0 maintains identical electrical and mechanical specifications across all parameters listed above, confirming functional and physical interchangeability within the STEP-Z series.

Parameter Comparison

Engineering Selection Recommendations

Both the 2-1761614-0 and 7-1761614-0 are active production parts from TE Connectivity AMP Connectors with identical electrical and mechanical specifications. The parts are functionally interchangeable for all applications requiring a 200-position differential pair array connector with 0.051" pitch in surface mount configuration.

The primary distinction between these parts is regulatory compliance status. The 7-1761614-0 carries ROHS3 compliance certification, while the 2-1761614-0 is RoHS non-compliant. Selection between these parts should be based on the regulatory requirements of the target application and end-use market. Applications subject to RoHS3 requirements must utilize the 7-1761614-0. Applications without RoHS3 mandates may use either part based on availability and supply chain considerations.

Both parts maintain MSL 1 (Unlimited) moisture sensitivity rating and are suitable for standard storage and handling conditions without special environmental controls.

Frequently Asked Questions (FAQ)

Q: Are the 2-1761614-0 and 7-1761614-0 physically interchangeable?

A: Yes. Both parts share identical mechanical dimensions, including 0.825" height above board, 18-row configuration, and compatible mated stacking heights of 25mm, 31mm, and 35mm. They are direct physical substitutes.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts feature 200 signal positions (100 differential pairs) with 0.051" (1.30mm) pitch, gold contact finish at 30.0µin (0.76µm) thickness, and identical connector type (Differential Pair Array, Male). Electrical performance is equivalent.

Q: What is the difference between these two part numbers?

A: The primary difference is RoHS compliance status. The 7-1761614-0 is ROHS3 compliant, while the 2-1761614-0 is RoHS non-compliant. All other specifications are identical.

Q: Which part should I select for a new design?

A: Selection depends on regulatory requirements. If RoHS3 compliance is required for your application or market, use 7-1761614-0. If RoHS compliance is not a requirement, either part may be used based on availability and supply chain factors.

Q: Are there any packaging differences between these parts?

A: Both parts are supplied in tray packaging. No packaging differences exist between the two part numbers.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard storage and handling conditions are appropriate.

Q: Can I use these connectors in high-speed differential signaling applications?

A: These are differential pair array connectors designed for differential signaling. Specific high-speed performance characteristics are not provided in the parametric data. Application suitability should be confirmed against detailed electrical performance specifications and signal integrity requirements.

Q: Are these parts available in other contact finishes?

A: The specifications provided indicate gold contact finish only. Alternative finishes are not listed in the available parametric data.