TE Connectivity 2176094-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176094-9 is a 140 kOhms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. The part is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, temperature coefficient, operating temperature range) and mechanical compatibility (package type, footprint dimensions). Substitute parts in this reference maintain the same 140 kOhms resistance and ±0.1% tolerance across the 0805 package form factor.

Substiute Parts

2176094-9

TE Connectivity Passive ProductIn Stock: 13682176094-9 Datasheet

Current PartRFQ

ERA-6AEB1403V

Panasonic Electronic ComponentsIn Stock: 14095ERA-6AEB1403V Datasheet

DirectRFQ

RG2012P-1403-B-T5

SusumuIn Stock: 4542RG2012P-1403-B-T5 Datasheet

DirectRFQ

RT0805BRD07140KL

YAGEOIn Stock: 5473RT0805BRD07140KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 2176094-9 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance Value: 140 kOhms
• Tolerance: ±0.1%
• Package Type: 0805 (2012 Metric)
• Footprint Dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Number of Terminations: 2
• RoHS3 Compliance

Variable Parameters (Non-Critical for Substitution):

• Power Rating: Substitute parts rated at 0.125W (1/8W) are acceptable as they represent a lower power dissipation specification within the same package
• Packaging Format: Tape & Reel (TR) or Cut Tape (CT) formats are interchangeable based on assembly requirements
• Manufacturer-Specific Features: Automotive AEC-Q200 certification and Anti-Sulfur properties are additional qualifications that do not prevent substitution

All identified substitute parts maintain electrical and mechanical compatibility with the main part while offering alternative sourcing options from different manufacturers.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and RoHS3 compliance, ensuring regulatory alignment with the original TE Connectivity 2176094-9 component.

ERA-6AEB1403V (Panasonic): This substitute carries Automotive AEC-Q200 certification, indicating qualification for automotive applications. The part is available in Cut Tape (CT) and Digi-Reel® packaging formats. Height specification is 0.024" (0.60mm), which is lower than the main part's 0.026" (0.65mm), ensuring compatibility with standard PCB assembly processes. REACH status is documented as Unaffected.

RG2012P-1403-B-T5 (Susumu): This substitute combines Automotive AEC-Q200 certification with Anti-Sulfur properties, providing enhanced environmental resistance. Supplied in Tape & Reel (TR) format, this part features the lowest seated height at 0.020" (0.50mm). REACH status is documented as Unaffected.

RT0805BRD07140KL (YAGEO): This substitute is supplied in Tape & Reel (TR) format with a seated height of 0.024" (0.60mm). The part maintains standard thin film composition without additional automotive or environmental certifications. REACH status is documented as Unaffected.

All substitute parts operate within the identical temperature coefficient (±25ppm/°C) and operating temperature range (-55°C ~ 155°C) as the main part. Power rating differences (0.125W versus 0.25W) reflect lower dissipation specifications in substitute parts, which remain suitable for applications where the original 0.25W rating is not required.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB1403V be used as a direct replacement for 2176094-9?

A: Yes. Both parts share identical resistance (140 kOhms), tolerance (±0.1%), package type (0805), footprint dimensions (0.079" L x 0.049" W), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C ~ 155°C). The ERA-6AEB1403V is rated at 0.125W compared to the main part's 0.25W; this lower power rating is acceptable in applications where power dissipation does not exceed 0.125W.

Q: What is the difference between the power ratings of the main part and substitute parts?

A: The TE Connectivity 2176094-9 is rated at 0.25W (1/4W), while all three substitute parts are rated at 0.125W (1/8W). Power rating indicates the maximum continuous power dissipation the resistor can handle. Substitute parts with lower power ratings are suitable for circuits where actual power dissipation remains below 0.125W. If circuit design requires power dissipation exceeding 0.125W, the main part or an alternative with higher power rating must be selected.

Q: Are there packaging format differences between these parts?

A: Yes. The main part (2176094-9) is supplied in Tape & Reel (TR) format. ERA-6AEB1403V is available in Cut Tape (CT) and Digi-Reel® formats. RG2012P-1403-B-T5 and RT0805BRD07140KL are supplied in Tape & Reel (TR) format. Packaging format selection depends on assembly equipment compatibility and production volume requirements.

Q: Do the substitute parts have automotive qualifications?

A: ERA-6AEB1403V and RG2012P-1403-B-T5 both carry Automotive AEC-Q200 certification. RT0805BRD07140KL does not list automotive certification. The main part (2176094-9) does not specify automotive qualification. AEC-Q200 certification indicates the part meets automotive industry reliability and quality standards.

Q: What is the significance of Anti-Sulfur properties in RG2012P-1403-B-T5?

A: Anti-Sulfur properties indicate the component is designed to resist degradation from sulfur-containing environments. This feature is relevant for applications exposed to industrial atmospheres or specific environmental conditions. The main part and other substitutes do not specify anti-sulfur treatment.

Q: Are all parts RoHS3 compliant?

A: Yes. The main part (2176094-9) and all three substitute parts are RoHS3 compliant, confirming compliance with Restriction of Hazardous Substances regulations.

Q: What are the height differences between these parts?

A: The main part has a maximum seated height of 0.026" (0.65mm). ERA-6AEB1403V and RT0805BRD07140KL have maximum seated heights of 0.024" (0.60mm). RG2012P-1403-B-T5 has the lowest maximum seated height at 0.020" (0.50mm). These variations remain within standard 0805 package specifications and do not affect PCB assembly compatibility.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: All parts, including the main component and all substitutes, have MSL 1 (Unlimited) rating. This indicates the components do not require special moisture control during storage and handling.

Q: Can substitute parts be mixed in the same production run?

A: Yes. All substitute parts maintain identical electrical specifications (140 kOhms ±0.1%, ±25ppm/°C, -55°C ~ 155°C operating range) and mechanical compatibility (0805 package, 0.079" L x 0.049" W footprint, 2 terminations). Substitution between parts does not require circuit redesign or PCB layout modification.