TE Connectivity 2176094-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176094-7 is a 133 kOhms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. The part is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and package compatibility are maintained across different manufacturers. Substitution becomes necessary for supply chain continuity, inventory availability, or design flexibility across manufacturing partners.

Substiute Parts

2176094-7

TE Connectivity Passive ProductIn Stock: 7752176094-7 Datasheet

Current PartRFQ

ERA-6AEB1333V

Panasonic Electronic ComponentsIn Stock: 12848ERA-6AEB1333V Datasheet

DirectRFQ

RT0805BRD07133KL

YAGEOIn Stock: 4881RT0805BRD07133KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the TE Connectivity 2176094-7 is based on the following critical parameters:

Electrical Equivalence Requirements:

• Resistance value: 133 kOhms (exact match)
• Tolerance: ±0.1% (exact match)
• Temperature coefficient: ±25ppm/°C (exact match)
• Operating temperature range: -55°C ~ 155°C (exact match)
• Composition: Thin Film (exact match)

Mechanical & Package Equivalence Requirements:

• Package type: 0805 (2012 Metric) (exact match)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm) (exact match)
• Number of terminations: 2 (exact match)

Compliance Requirements:

• RoHS3 Compliant (required)
• MSL 1 (Unlimited) (required)

Substitute parts identified meet all electrical and mechanical parameters. Power rating variations (0.25W vs. 0.125W) are noted but do not disqualify substitution when the substitute rating meets or exceeds circuit requirements.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 2176094-7 (Primary Part)

The TE Connectivity 2176094-7 is the specified component with Active product status and full ROHS3 compliance. This part is suitable for applications requiring the full 0.25W power rating specification.

Panasonic ERA-6AEB1333V (Substitute)

The Panasonic ERA-6AEB1333V meets all electrical and mechanical equivalence criteria. This part carries AEC-Q200 automotive qualification, which provides additional reliability assurance for automotive and high-reliability applications. The 0.125W power rating is lower than the primary part; substitution is valid when circuit power dissipation does not exceed 0.125W. REACH Unaffected status is confirmed.

YAGEO RT0805BRD07133KL (Substitute)

The YAGEO RT0805BRD07133KL meets all electrical and mechanical equivalence criteria. This part carries no automotive qualification but maintains full ROHS3 compliance and MSL 1 rating. The 0.125W power rating is lower than the primary part; substitution is valid when circuit power dissipation does not exceed 0.125W. REACH Unaffected status is confirmed.

All three parts are Active products with confirmed inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB1333V replace the TE Connectivity 2176094-7 in all applications?

A: The Panasonic ERA-6AEB1333V is electrically and mechanically equivalent. Substitution is valid when the circuit power dissipation does not exceed 0.125W. The primary part is rated at 0.25W; if the application requires the full 0.25W rating, the Panasonic substitute is not appropriate.

Q: What is the difference between the 0.25W and 0.125W power ratings?

A: Power rating indicates the maximum continuous power dissipation the resistor can handle. The TE Connectivity 2176094-7 is rated at 0.25W, while both substitute parts are rated at 0.125W. Selection depends on actual circuit power dissipation requirements.

Q: Are the physical dimensions identical across all three parts?

A: All three parts use the 0805 (2012 Metric) package with identical length and width (0.079" L x 0.049" W). The seated height differs slightly: TE Connectivity at 0.026" (0.65mm) maximum, and both substitutes at 0.024" (0.60mm) maximum. These variations are within standard PCB assembly tolerances.

Q: Does the Panasonic ERA-6AEB1333V AEC-Q200 qualification provide additional benefits?

A: AEC-Q200 is an automotive qualification standard. The Panasonic part meets this standard, which indicates compliance with automotive reliability and quality requirements. This qualification is relevant for automotive applications but does not affect electrical or mechanical compatibility in non-automotive applications.

Q: Are all three parts RoHS3 compliant?

A: Yes. The TE Connectivity 2176094-7, Panasonic ERA-6AEB1333V, and YAGEO RT0805BRD07133KL are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes, provided circuit power dissipation does not exceed 0.125W. All three parts share identical electrical specifications (133 kOhms ±0.1%, ±25ppm/°C, -55°C ~ 155°C), identical package dimensions (0805), and identical termination count (2). The slight height variation (0.026" vs. 0.024") does not affect PCB assembly compatibility.

Q: What is the REACH status for each part?

A: TE Connectivity 2176094-7 lists REACH status as Vendor Undefined. Panasonic ERA-6AEB1333V and YAGEO RT0805BRD07133KL both list REACH Unaffected status.