TE Connectivity 2176094-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176094-6 is a 130 kOhms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. The part is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and operates across the temperature range of -55°C to 155°C. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required for design flexibility, supply chain alternatives, or specific application requirements such as automotive qualification or enhanced environmental protection.

Substiute Parts

2176094-6

TE Connectivity Passive ProductIn Stock: 14922176094-6 Datasheet

Current PartRFQ

ERA-6AEB134V

Panasonic Electronic ComponentsIn Stock: 263070ERA-6AEB134V Datasheet

DirectRFQ

RG2012P-134-B-T5

SusumuIn Stock: 2964RG2012P-134-B-T5 Datasheet

DirectRFQ

RT0805BRD07130KL

YAGEOIn Stock: 18982RT0805BRD07130KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 2176094-6 is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

• Resistance Value: 130 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Operating Temperature Range: -55°C to 155°C (exact match required)
• RoHS3 Compliance: Required
• MSL Rating: 1 (Unlimited) (exact match required)

Allowable Variation:

• Power Rating: Substitute parts rated at 0.125W (1/8W) are acceptable as this represents a higher performance margin than the original 0.25W (1/4W) specification. Lower power ratings are not acceptable.
• Physical Dimensions: Height variation within supplier specifications is acceptable provided the 0805 package footprint is maintained.

All identified substitute parts meet these criteria and are confirmed as Active products with RoHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally equivalent to the TE Connectivity 2176094-6 based on electrical specifications and mechanical compatibility. Selection among alternatives is determined by application-specific requirements and compliance certifications:

Panasonic ERA-6AEB134V: This substitute carries AEC-Q200 automotive qualification, making it suitable for automotive applications requiring formal qualification documentation. The part maintains all electrical parameters and operates within the specified temperature range.

Susumi RG2012P-134-B-T5: This substitute combines AEC-Q200 automotive qualification with anti-sulfur protection, providing enhanced environmental resistance. The anti-sulfur feature addresses corrosion concerns in specific industrial environments. The lowest seated height (0.020" / 0.50mm) may provide advantages in space-constrained designs.

YAGEO RT0805BRD07130KL: This substitute provides a standard thin film 0805 resistor without automotive qualification. It is suitable for general industrial and consumer applications where AEC-Q200 certification is not required.

All substitute parts are Active products with RoHS3 compliance and MSL 1 rating, ensuring long-term availability and environmental regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB134V replace the TE Connectivity 2176094-6 in all applications?

A: The Panasonic ERA-6AEB134V is electrically and mechanically equivalent to the TE Connectivity 2176094-6. The lower power rating (0.125W vs. 0.25W) represents a higher performance margin and does not restrict substitution. The AEC-Q200 qualification is an additional feature that does not prevent use in non-automotive applications.

Q: What is the significance of the anti-sulfur feature in the Susumu RG2012P-134-B-T5?

A: The anti-sulfur feature provides protection against corrosion in environments with elevated sulfur compounds. This is specified in the product data and is relevant only for applications exposed to such environmental conditions. For standard operating environments, this feature does not affect electrical performance or compatibility.

Q: Are there physical installation differences between the substitute parts?

A: All substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W). Seated height varies slightly between parts (0.020" to 0.026"), but all values remain within standard 0805 package specifications and do not affect PCB assembly or clearance requirements.

Q: Which substitute part should be selected for automotive applications?

A: Both the Panasonic ERA-6AEB134V and Susumu RG2012P-134-B-T5 carry AEC-Q200 automotive qualification. Selection between these two depends on whether anti-sulfur protection is required for the specific application environment.

Q: Is the lower power rating of substitute parts a limitation?

A: No. The substitute parts rated at 0.125W (1/8W) provide a higher performance margin than the original 0.25W (1/4W) specification. This allows substitution in all applications where the original part was specified, provided the actual power dissipation in the circuit does not exceed 0.125W.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All substitute parts listed are supplied in Tape & Reel (TR) packaging, matching the original TE Connectivity 2176094-6 packaging format.

Q: What is the difference in tolerance between the main part and substitutes?

A: There is no difference. All parts, including the main part and all substitutes, maintain ±0.1% tolerance, ensuring equivalent precision in circuit applications.