TE Connectivity 2176092-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176092-9 is an 806 Ohms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is part of the RP73P series from Holsworthy and maintains Active product status. The part is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and operates across the temperature range of -55°C to 155°C. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when alternative specifications better suit application requirements.

Substiute Parts

2176092-9

TE Connectivity Passive ProductIn Stock: 14792176092-9 Datasheet

Current PartRFQ

ERA-6AEB8060V

Panasonic Electronic ComponentsIn Stock: 6590ERA-6AEB8060V Datasheet

DirectRFQ

RG2012P-8060-B-T5

SusumuIn Stock: 5683RG2012P-8060-B-T5 Datasheet

DirectRFQ

RT0805BRD07806RL

YAGEOIn Stock: 2435RT0805BRD07806RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 2176092-9 is determined by strict equivalence in the following parameters: resistance value (806 Ohms), tolerance (±0.1%), package type (0805 / 2012 Metric), composition (thin film), temperature coefficient (±25ppm/°C), operating temperature range (-55°C to 155°C), and compliance certifications (RoHS3, MSL 1).

The identified substitute parts maintain these core electrical and mechanical specifications. However, substitute parts RT0805BRD07806RL (YAGEO), ERA-6AEB8060V (Panasonic), and RG2012P-8060-B-T5 (Susumu) are rated at 0.125W (1/8W) power dissipation, which represents a lower power rating compared to the primary part's 0.25W specification. This power rating difference is a critical design consideration: applications requiring the full 0.25W dissipation capability cannot use these lower-rated substitutes without thermal or reliability risk. Conversely, applications with power requirements at or below 0.125W can utilize these substitutes without functional limitation.

All substitute parts maintain identical resistance, tolerance, package dimensions, temperature coefficient, and compliance status as the primary part.

Parameter Comparison

Engineering Selection Recommendations

Selection among the TE Connectivity 2176092-9 and its substitutes is determined by application power dissipation requirements and environmental compliance needs.

TE Connectivity 2176092-9 is the primary specification when applications require the full 0.25W power dissipation capability. This part maintains Active product status and RoHS3 compliance.

YAGEO RT0805BRD07806RL is suitable for applications with power dissipation at or below 0.125W. This part is Active, RoHS3 compliant, and offers standard thin film performance without automotive-specific certifications.

Panasonic ERA-6AEB8060V is suitable for applications with power dissipation at or below 0.125W and requiring AEC-Q200 automotive qualification. This part is Active, RoHS3 compliant, and carries REACH Unaffected status.

Susumu RG2012P-8060-B-T5 is suitable for applications with power dissipation at or below 0.125W, requiring AEC-Q200 automotive qualification, and operating in environments where anti-sulfur protection is necessary. This part is Active, RoHS3 compliant, carries REACH Unaffected status, and features the lowest seated height at 0.020" (0.50mm).

All substitute parts maintain identical electrical performance in resistance, tolerance, and temperature coefficient specifications. Selection should prioritize power rating compatibility with circuit requirements and environmental certifications appropriate to the application domain.

Frequently Asked Questions (FAQ)

Q: Can YAGEO RT0805BRD07806RL, Panasonic ERA-6AEB8060V, or Susumu RG2012P-8060-B-T5 directly replace TE Connectivity 2176092-9 in all applications?

A: Direct replacement is limited by power rating. The substitute parts are rated at 0.125W (1/8W) compared to the primary part's 0.25W (1/4W). Substitution is valid only when circuit power dissipation does not exceed 0.125W. Applications requiring the full 0.25W rating must use the TE Connectivity 2176092-9.

Q: Are there physical compatibility concerns when substituting these parts?

A: All parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Seated heights vary slightly: TE Connectivity at 0.026" (0.65mm), YAGEO and Panasonic at 0.024" (0.60mm), and Susumu at 0.020" (0.50mm). These height variations are within standard PCB assembly tolerances and do not present compatibility issues for standard surface mount processes.

Q: Which substitute part is appropriate for automotive applications?

A: Both Panasonic ERA-6AEB8060V and Susumu RG2012P-8060-B-T5 carry AEC-Q200 automotive qualification. The Susumu part additionally features anti-sulfur protection. The YAGEO RT0805BRD07806RL does not carry automotive certification.

Q: What is the significance of the anti-sulfur feature in the Susumu RG2012P-8060-B-T5?

A: The anti-sulfur feature provides protection against sulfur-containing environmental contaminants that can degrade thin film resistor performance. This feature is relevant for applications in industrial or harsh environments where sulfur exposure is a concern.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All identified substitute parts (YAGEO RT0805BRD07806RL, Panasonic ERA-6AEB8060V, and Susumu RG2012P-8060-B-T5) are RoHS3 compliant and maintain MSL 1 (Unlimited) moisture sensitivity rating, matching the primary part's compliance status.

Q: What is the temperature coefficient significance for these parts?

A: All parts, including the primary TE Connectivity 2176092-9 and all substitutes, maintain an identical temperature coefficient of ±25ppm/°C. This specification ensures consistent resistance stability across the operating temperature range of -55°C to 155°C and does not differentiate substitution suitability.