TE Connectivity 2176092-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176092-6 is a thin film chip resistor with a resistance value of 732 Ohms and a tolerance of ±0.1%. This 0805 (2012 Metric) surface-mount device is rated for 0.25W (1/4W) power dissipation and operates across a temperature range of -55°C to 155°C. The component is manufactured in the RP73P series by TE Connectivity's Holsworthy facility and maintains Active product status. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when alternative sourcing is required.

Substiute Parts

2176092-6

TE Connectivity Passive ProductIn Stock: 13312176092-6 Datasheet

Current PartRFQ

ERA-6AEB7320V

Panasonic Electronic ComponentsIn Stock: 10651ERA-6AEB7320V Datasheet

DirectRFQ

RT0805BRD07732RL

YAGEOIn Stock: 2743RT0805BRD07732RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 2176092-6 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 732 Ohms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C to 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts rated at 0.125W (1/8W) are acceptable as they represent a lower power dissipation specification within the same package footprint. The 0805 package accommodates both ratings without dimensional conflict.

Both identified substitute parts meet all mandatory parameters and operate within the allowable power rating variation. The substitutes maintain identical electrical performance characteristics while offering alternative sourcing from different manufacturers.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 2176092-6 (Primary Part) The TE Connectivity 2176092-6 remains the primary specification with a 0.25W power rating. This part is Active and ROHS3 compliant. Selection of this part is appropriate when the original design specification calls for the higher power rating or when TE Connectivity sourcing is mandated by procurement requirements.

Panasonic ERA-6AEB7320V (Substitute) The Panasonic ERA-6AEB7320V is an Active, ROHS3-compliant substitute rated at 0.125W (1/8W). This part carries Automotive AEC-Q200 certification, indicating qualification for automotive applications. The ERA-6AEB7320V is suitable for designs where automotive-grade components are required or where the lower power rating meets circuit requirements. REACH status is listed as Unaffected.

YAGEO RT0805BRD07732RL (Substitute) The YAGEO RT0805BRD07732RL is an Active, ROHS3-compliant substitute rated at 0.125W (1/8W). This part carries no automotive certification. The RT0805BRD07732RL is suitable for general industrial and commercial applications where the lower power rating meets circuit requirements. REACH status is listed as Unaffected.

All three parts share identical electrical characteristics (resistance, tolerance, temperature coefficient, operating temperature range) and package dimensions. Selection between substitutes depends on application requirements, sourcing preferences, and whether automotive qualification is necessary.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB7320V or YAGEO RT0805BRD07732RL be used as direct replacements for the TE Connectivity 2176092-6?

A: Yes, both substitute parts are electrically and mechanically compatible. All three components share identical resistance (732 Ohms), tolerance (±0.1%), package (0805), composition (thin film), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C to 155°C). The substitute parts are rated at 0.125W (1/8W) compared to the primary part's 0.25W (1/4W) rating. This lower power rating is acceptable in applications where circuit power dissipation does not exceed 0.125W.

Q: What is the difference between the 0.25W and 0.125W power ratings?

A: The power rating indicates the maximum continuous power dissipation the resistor can handle without exceeding temperature limits. The TE Connectivity 2176092-6 is rated for 0.25W, while the Panasonic and YAGEO substitutes are rated for 0.125W. In circuits where the actual power dissipation is below 0.125W, either part functions identically. For circuits requiring power dissipation between 0.125W and 0.25W, the TE Connectivity part is required.

Q: Are there dimensional differences between these parts?

A: All three parts use the 0805 (2012 Metric) package with identical length and width dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). The seated height differs slightly: the TE Connectivity part has a maximum height of 0.026" (0.65mm), while both substitutes have a maximum height of 0.024" (0.60mm). These height variations are within typical PCB assembly tolerances and do not affect interchangeability.

Q: Does the Panasonic ERA-6AEB7320V have any special certifications?

A: Yes, the Panasonic ERA-6AEB7320V carries Automotive AEC-Q200 certification. This qualification indicates the part meets automotive industry reliability and performance standards. The YAGEO RT0805BRD07732RL does not carry automotive certification. Selection of the Panasonic part is required for automotive applications.

Q: What is the significance of the ±25ppm/°C temperature coefficient?

A: The temperature coefficient of ±25ppm/°C specifies how the resistance value changes with temperature. All three parts share this identical specification, meaning resistance stability across the -55°C to 155°C operating range is equivalent. This parameter is critical for precision applications requiring stable resistance values across temperature variations.

Q: Are all three parts RoHS3 compliant?

A: Yes, all three parts are ROHS3 compliant, indicating they meet the Restriction of Hazardous Substances directive requirements. All parts also carry Moisture Sensitivity Level 1 (Unlimited), meaning they require no special moisture control during storage and handling.

Q: What is the difference in REACH status between the parts?

A: The TE Connectivity 2176092-6 lists REACH status as Vendor Undefined. Both the Panasonic ERA-6AEB7320V and YAGEO RT0805BRD07732RL list REACH status as Unaffected, indicating these substances are not subject to REACH registration requirements. For applications requiring confirmed REACH compliance documentation, the Panasonic and YAGEO parts provide explicit status.