TE Connectivity 2176092-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176092-4 is a thin film chip resistor with a resistance value of 698 Ohms and a tolerance of ±0.1%. This 0805 (2012 Metric) surface-mount device is rated for 0.25W (1/4W) power dissipation and operates across a temperature range of -55°C to 155°C. The component is part of the RP73P series from Holsworthy and maintains an active product status. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory availability, or specific certification requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

2176092-4

TE Connectivity Passive ProductIn Stock: 8812176092-4 Datasheet

Current PartRFQ

ERA-6AEB6980V

Panasonic Electronic ComponentsIn Stock: 6649ERA-6AEB6980V Datasheet

DirectRFQ

RT0805BRD07698RL

YAGEOIn Stock: 3493RT0805BRD07698RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 2176092-4 are qualified based on the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Resistance value: 698 Ohms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Operating Temperature Range: -55°C to 155°C (exact match required)
• RoHS3 Compliance (required)
• Moisture Sensitivity Level: 1 (required)

Secondary Consideration:

• Power rating: Substitute parts rated at 0.125W (1/8W) are acceptable as they represent a lower power dissipation specification within the same package footprint and do not compromise electrical performance in applications designed for the 0.25W (1/4W) rating.

All substitute parts maintain identical physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two-termination configuration.

Parameter Comparison

Engineering Selection Recommendations

Panasonic ERA-6AEB6980V: This substitute part is qualified for direct replacement in applications where automotive-grade reliability is required. The component carries AEC-Q200 certification, indicating compliance with automotive qualification standards. The 0.125W power rating is suitable for circuits designed within the thermal envelope of the original 0.25W specification. REACH compliance status is confirmed as unaffected. This part is recommended for automotive and high-reliability applications.

YAGEO RT0805BRD07698RL: This substitute part provides electrical and mechanical equivalence with confirmed REACH unaffected status. The 0.125W power rating is appropriate for standard industrial and commercial applications. This part is recommended for general-purpose circuit applications where automotive certification is not required.

Both substitute parts maintain full compatibility with the original TE Connectivity 2176092-4 in terms of electrical performance, physical footprint, and environmental operating conditions. Selection between substitutes should be based on application-specific requirements such as automotive qualification needs and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB6980V or YAGEO RT0805BRD07698RL be used as direct replacements for the TE Connectivity 2176092-4?

A: Yes. Both substitute parts meet all critical electrical parameters: 698 Ohms resistance, ±0.1% tolerance, ±25ppm/°C temperature coefficient, and -55°C to 155°C operating range. All three components are thin film 0805 (2012 Metric) packages with identical physical dimensions and two-termination configurations. RoHS3 compliance and MSL 1 ratings are maintained across all parts.

Q: What is the significance of the power rating difference between the main part (0.25W) and the substitute parts (0.125W)?

A: The substitute parts are rated for lower power dissipation (0.125W versus 0.25W). In applications designed for the original 0.25W specification, the lower-rated substitutes remain fully functional provided the actual power dissipation in the circuit does not exceed 0.125W. The physical package dimensions and thermal characteristics are compatible. Selection should be based on the actual power requirements of the application.

Q: Are there any height differences between these parts that could affect PCB assembly?

A: The TE Connectivity 2176092-4 has a maximum seated height of 0.026" (0.65mm), while both substitute parts have a maximum seated height of 0.024" (0.60mm). This 0.002" (0.05mm) difference is within standard PCB assembly tolerances and does not affect component placement or soldering processes.

Q: What is the difference between the Panasonic ERA-6AEB6980V and the YAGEO RT0805BRD07698RL?

A: Both parts are electrically and mechanically equivalent. The primary distinction is that the Panasonic ERA-6AEB6980V carries AEC-Q200 automotive qualification, making it suitable for automotive applications. The YAGEO RT0805BRD07698RL is specified for general industrial and commercial use. Both have confirmed REACH compliance status and identical electrical specifications.

Q: Can these parts be used interchangeably in the same circuit board design?

A: Yes. All three parts share identical resistance values, tolerances, temperature coefficients, operating temperature ranges, package dimensions, and footprints. They are electrically and mechanically interchangeable within the constraints of the application's power dissipation requirements.

Q: What certifications and compliance standards apply to these substitute parts?

A: All three parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings. The Panasonic ERA-6AEB6980V additionally carries AEC-Q200 automotive qualification. REACH compliance is confirmed as unaffected for both substitute parts.