TE Connectivity 2176091-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176091-2 is a thin film chip resistor rated at 59 Ohms with ±0.1% tolerance and 0.25W power rating in 0805 (2012 Metric) surface mount package. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility exist, enabling procurement flexibility while maintaining circuit performance requirements.

Substiute Parts

2176091-2

TE Connectivity Passive ProductIn Stock: 19702176091-2 Datasheet

Current PartRFQ

ERA-6AEB59R0V

Panasonic Electronic ComponentsIn Stock: 8754ERA-6AEB59R0V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 2176091-2 is determined by the following critical parameters:

Electrical Equivalence Requirements:

• Resistance value: 59 Ohms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Temperature coefficient: ±25ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)

Mechanical Compatibility Requirements:

• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Number of terminations: 2 (exact match required)

Compliance Requirements:

• RoHS3 Compliant status
• Moisture Sensitivity Level 1

The Panasonic ERA-6AEB59R0V meets all electrical and mechanical compatibility criteria. While the power rating differs (0.125W versus 0.25W), this represents a derating condition where the substitute part operates within acceptable thermal limits for applications not requiring the full 0.25W capacity of the primary part.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (TE Connectivity 2176091-2): Select this part for applications requiring the full 0.25W power dissipation capacity. The component is Active status with ROHS3 compliance and unlimited moisture sensitivity rating, suitable for standard industrial and commercial applications.

Substitute Part Selection (Panasonic ERA-6AEB59R0V): The Panasonic ERA-6AEB59R0V is suitable for applications where power dissipation does not exceed 0.125W. This substitute provides additional value through Automotive AEC-Q200 qualification, enabling use in automotive-grade applications. Both parts maintain identical electrical specifications (59 Ohms, ±0.1%, ±25ppm/°C) and mechanical compatibility (0805 package). The substitute part's lower power rating requires verification that circuit operating conditions remain within 0.125W limits.

Both parts are Active status with ROHS3 compliance and MSL 1 rating, ensuring equivalent supply chain reliability and environmental compliance.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB59R0V directly replace the TE Connectivity 2176091-2 in all applications?

A: Direct replacement is valid for applications where resistor power dissipation does not exceed 0.125W. The substitute part has identical electrical specifications (59 Ohms, ±0.1% tolerance, ±25ppm/°C temperature coefficient) and operates across the same temperature range (-55°C ~ 155°C). Circuit design review is required to confirm power dissipation remains within the substitute part's 0.125W rating.

Q: Are the physical dimensions compatible for PCB assembly?

A: Yes. Both parts use the 0805 (2012 Metric) package with identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). The Panasonic substitute has a maximum seated height of 0.024" (0.60mm) compared to 0.026" (0.65mm) for the TE Connectivity part, representing a 0.002" reduction that does not affect PCB layout or assembly clearances.

Q: What is the significance of the Automotive AEC-Q200 qualification on the Panasonic part?

A: AEC-Q200 qualification indicates the Panasonic ERA-6AEB59R0V meets automotive industry reliability and quality standards. This certification enables use in automotive applications where such qualification is contractually required. The TE Connectivity 2176091-2 does not carry this designation and is suitable for non-automotive applications.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the TE Connectivity 2176091-2 and Panasonic ERA-6AEB59R0V are ROHS3 compliant, meeting current environmental and hazardous substance restrictions for electronic components.

Q: What is the Moisture Sensitivity Level (MSL) for both parts?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These components do not require special moisture control during storage, handling, or assembly processes.

Q: Can these parts be used interchangeably in high-precision applications?

A: Yes, regarding tolerance and temperature coefficient specifications. Both parts maintain ±0.1% tolerance and ±25ppm/°C temperature coefficient, meeting high-precision circuit requirements. Power dissipation limits must still be verified for the application.

Q: What is the difference in packaging between these parts?

A: Both parts are supplied in Tape & Reel (TR) packaging format, standard for automated PCB assembly. Packaging is equivalent and interchangeable from a supply chain perspective.