TE Connectivity 2176089-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2176089-2 is a thin film chip resistor with a resistance value of 10.5 kOhms and a tolerance of ±0.1%. This 0603 (1608 Metric) surface mount device is rated for 0.167W (1/6W) power dissipation and operates across a temperature range of -55°C to 155°C. The component is part of the RP73P series from Holsworthy and maintains an active product status. Substitute parts are identified to provide alternative sourcing options when the primary component is unavailable or when specific application requirements necessitate alternative specifications within compatible electrical and mechanical parameters.

Substiute Parts

2176089-2

TE Connectivity Passive ProductIn Stock: 10112176089-2 Datasheet

Current PartRFQ

RG1608P-1052-B-T5

SusumuIn Stock: 30226RG1608P-1052-B-T5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 2176089-2 is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

• Resistance value: 10.5 kOhms
• Tolerance: ±0.1%
• Package type: 0603 (1608 Metric)
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Number of terminations: 2
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Allowable Variation: Power rating may vary provided the substitute part meets or exceeds the minimum power dissipation requirements of the application. The Susumu RG1608P-1052-B-T5 operates at 0.1W (1/10W), which is lower than the primary part's 0.167W (1/6W) rating. This substitute is suitable for applications where the actual power dissipation does not exceed 0.1W.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 2176089-2 and the Susumi RG1608P-1052-B-T5 are active products with ROHS3 compliance and identical electrical specifications for resistance, tolerance, and temperature coefficient. The primary distinction between these components is the power rating differential.

The TE Connectivity 2176089-2 is suitable for applications requiring up to 0.167W power dissipation. The Susumu RG1608P-1052-B-T5 is suitable for applications where power dissipation does not exceed 0.1W. The Susumu part includes automotive AEC-Q200 qualification and anti-sulfur features, which provide additional reliability characteristics for specific application environments.

Physical dimensions are compatible within standard PCB assembly tolerances, with the Susumu part exhibiting a slightly lower maximum seated height (0.020" versus 0.022"), which may provide advantages in space-constrained designs.

Frequently Asked Questions (FAQ)

Q: Can the Susumu RG1608P-1052-B-T5 directly replace the TE Connectivity 2176089-2 in all applications?

A: Direct replacement is valid only when the actual power dissipation in the circuit does not exceed 0.1W. The Susumu part has a lower power rating (0.1W versus 0.167W). If the application requires the full 0.167W capability, the TE Connectivity part must be used.

Q: Are the physical dimensions compatible for PCB assembly?

A: Both components use the 0603 (1608 Metric) package. The Susumu part measures 0.063" L x 0.031" W (1.60mm x 0.80mm) compared to the TE Connectivity part at 0.061" L x 0.031" W (1.55mm x 0.80mm). These dimensional differences are within standard PCB assembly tolerances and do not prevent interchangeability on standard 0603 footprints.

Q: What is the significance of the AEC-Q200 qualification on the Susumu part?

A: AEC-Q200 is an automotive qualification standard. The Susumu RG1608P-1052-B-T5 meets this standard and includes anti-sulfur features, making it suitable for automotive and harsh environment applications. The TE Connectivity part does not carry this designation.

Q: Are both parts RoHS compliant?

A: Yes, both the TE Connectivity 2176089-2 and the Susumu RG1608P-1052-B-T5 are ROHS3 compliant.

Q: Do both parts have the same moisture sensitivity level?

A: Yes, both components have a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage and handling.

Q: What is the temperature coefficient specification, and is it identical between both parts?

A: Both parts have a temperature coefficient of ±25ppm/°C, ensuring equivalent temperature stability across the operating range of -55°C to 155°C.