TE Connectivity AMP Connectors 2-172211-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-172211-5 is a 5-position rectangular connector housing designed for plug applications with a 2.50mm pitch. This connector is classified as a free-hanging, in-line component with crimp contact termination and is constructed from polyamide (PA66) nylon material. The part is currently active in production status and maintains full RoHS compliance. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when packaging requirements differ.

Substiute Parts

2-172211-5

TE Connectivity AMP ConnectorsIn Stock: 9662-172211-5 Datasheet

Current PartRFQ

172211-5

TE Connectivity AMP ConnectorsIn Stock: 8841172211-5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2-172211-5 is determined by strict equivalence across the following critical parameters: connector type (plug), number of positions (5), pitch specification (2.50mm), contact type (male pin), number of rows (1), mounting type (free hanging in-line), contact termination method (crimp), insulation material (polyamide PA66 nylon 6/6), and operating temperature range (-20°C to 95°C). All identified substitute parts maintain identical electrical and mechanical specifications across these parameters. Packaging configuration and color variation are permitted differences that do not affect functional interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both the 2-172211-5 and 172211-5 are active production parts manufactured by TE Connectivity AMP Connectors within the EI series. Both parts maintain full RoHS compliance and carry an MSL rating of 1 (unlimited moisture sensitivity level), indicating no special storage or handling requirements. The primary distinction between these parts is color specification: the main part number 2-172211-5 is supplied in black, while the substitute 172211-5 is supplied in natural color. All electrical and mechanical parameters remain identical. Selection between these parts should be based on color requirements for the end application. The substitute part 172211-5 is available in significantly higher inventory (8824 pieces) compared to the main part (878 pieces), which may influence sourcing decisions based on lead time and availability requirements.

Frequently Asked Questions (FAQ)

Q: Can the 172211-5 (natural color) be used as a direct replacement for the 2-172211-5 (black color)?

A: Yes. Both parts are electrically and mechanically identical across all functional parameters including connector type, position count, pitch, contact type, termination method, and operating temperature range. The only difference is the housing color. Selection should be based on whether color specification is a functional requirement for the application.

Q: Are contacts included with these connector housings?

A: No. Both the 2-172211-5 and 172211-5 are connector housings only. Contacts are not included and must be sourced separately.

Q: What is the significance of the MSL rating of 1 (Unlimited)?

A: An MSL rating of 1 indicates unlimited shelf life without special moisture control requirements. These parts do not require dry-pack storage or baking procedures prior to assembly.

Q: Are both parts RoHS compliant?

A: Yes. Both the 2-172211-5 and 172211-5 are RoHS compliant and suitable for applications requiring restricted substance compliance.

Q: What is the difference between the packaging specifications?

A: The main part 2-172211-5 is supplied in standard packaging, while the substitute 172211-5 is supplied in bulk packaging. Bulk packaging typically offers cost advantages for high-volume applications but may not be suitable for applications requiring individual unit packaging.

Q: Can these connectors operate in the full temperature range of -20°C to 95°C?

A: Yes. Both parts are rated for continuous operation across the -20°C to 95°C temperature range. This specification applies to the insulation material and connector housing performance.