TE Connectivity AMP Connectors 2-1658462-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-1658462-5 is a 200 position rectangular connector receptacle designed for surface mount applications. This connector features center strip contacts with gold plating and is part of the MICTOR SB series. The component is classified as Active product status and is currently in stock with 777 pieces available.

Identification of equivalent and substitute parts is necessary to support procurement flexibility, manage supply chain continuity, and ensure design compatibility across manufacturing batches and inventory sources.

Substiute Parts

2-1658462-5

TE Connectivity AMP ConnectorsIn Stock: 8622-1658462-5 Datasheet

Current PartRFQ

1658462-5

TE Connectivity AMP ConnectorsIn Stock: 9931658462-5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2-1658462-5 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Connector type classification (Receptacle, Center Strip Contacts)
• Number of positions (200)
• Contact pitch (0.031" / 0.80mm)
• Number of rows (2)
• Contact finish material and thickness (Gold, 30.0µin)

Mechanical Parameters:

• Mounting technology (Surface Mount)
• Height above board (0.128" / 3.25mm)
• Mated stacking height compatibility (5mm through 30mm range)
• Structural features (Board Guide, Ground Bus Plane)

Compliance Parameters:

• Series designation (MICTOR SB)
• Moisture sensitivity level (MSL 1)
• Product status (Active)

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. No parameter deviation is permitted for substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

The part 1658462-5 is a direct parametric equivalent to 2-1658462-5. Both components are manufactured by TE Connectivity AMP Connectors, share identical electrical and mechanical specifications, and maintain Active product status. Selection between these parts is based on inventory availability and procurement requirements.

Current inventory status shows 777 pieces of 2-1658462-5 and 956 pieces of 1658462-5 available. Both parts are supplied in Tray packaging and carry identical compliance classifications including MSL 1 (Unlimited) rating.

No technical differentiation exists between these parts. Component selection should be determined by supply chain logistics and inventory management protocols.

Frequently Asked Questions (FAQ)

Q: Are 2-1658462-5 and 1658462-5 interchangeable?

A: Yes. These parts are parametric equivalents with identical electrical and mechanical specifications. Both are 200 position MICTOR SB series receptacles with center strip contacts, 0.031" pitch, surface mount configuration, and gold contact finish. All dimensional and performance parameters are identical.

Q: What determines substitution eligibility for this connector?

A: Substitution eligibility is determined by exact matching of connector type, position count, pitch, row configuration, mounting technology, contact finish specifications, height above board, stacking height compatibility, and structural features. Any deviation in these parameters disqualifies a part from substitution.

Q: Does the part number prefix difference (2- versus no prefix) affect compatibility?

A: No. The prefix difference does not affect electrical or mechanical compatibility. Both 2-1658462-5 and 1658462-5 share the same base product number (1658462) and are functionally identical MICTOR SB series connectors.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 (Unlimited) indicates that this component has unlimited shelf life and requires no special moisture control during storage or handling. This classification applies to both the main part and its substitute.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical compliance status including ECCN EAR99 classification and HTSUS code 8536.69.4040. RoHS status is Not applicable for both components, and REACH status is Vendor Undefined for both.

Q: Can these connectors accommodate different mated stacking heights?

A: Yes. Both parts support mated stacking heights of 5mm, 8mm, 11mm, 14mm, 16mm, 19mm, 22mm, 25mm, and 30mm. The specific stacking height used depends on application requirements and mating connector selection.

Q: What packaging format is used for these parts?

A: Both parts are supplied in Tray packaging, which is the standard format for surface mount rectangular connectors in this category.