TE Connectivity 215083-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 215083-6 is a 6-position rectangular plug connector from the Micro-MaTch series, designed for IDC (Insulation Displacement Contact) termination on 28 AWG ribbon cable. This connector features male pin contacts with tin finish and is configured as a free-hanging, in-line plug suitable for applications requiring reliable ribbon cable interconnection.

The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility with the original specification.

Substiute Parts

215083-6

TE Connectivity AMP ConnectorsIn Stock: 977215083-6 Datasheet

Current PartRFQ

7-215083-6

TE Connectivity AMP ConnectorsIn Stock: 2204057-215083-6 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 215083-6 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Connector type (Plug)
• Number of positions (6)
• Contact type (Male Pin)
• Contact finish (Tin)
• Wire gauge (28 AWG)

Mechanical Compatibility Parameters:

• Pitch (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing (0.059" / 1.50mm)
• Mounting type (Free Hanging In-Line)
• Cable termination method (IDC)

Compliance Parameters:

• RoHS status (ROHS3 Compliant)
• Series designation (Micro-MaTch)

The substitute part 7-215083-6 maintains identical specifications across all electrical, mechanical, and compliance parameters, establishing direct functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 215083-6 and its substitute 7-215083-6 are active production components manufactured by TE Connectivity AMP Connectors. Both parts carry ROHS3 compliance certification and maintain identical electrical and mechanical specifications.

Selection between these parts should be based on:

Availability and Lead Time: The substitute part 7-215083-6 maintains significantly higher inventory levels (220,383 pieces) compared to the main part (898 pieces), making it suitable for applications where supply continuity is a priority.

Compliance Status: Both parts meet ROHS3 requirements. The substitute part carries explicit REACH Unaffected status, while the main part lists REACH status as vendor undefined. For applications requiring documented REACH compliance, the substitute part provides additional regulatory clarity.

Functional Equivalence: No electrical or mechanical differentiation exists between these parts. They are interchangeable within the Micro-MaTch connector ecosystem for 6-position, 28 AWG ribbon cable applications.

Frequently Asked Questions (FAQ)

Q: Are the 215083-6 and 7-215083-6 connectors mechanically interchangeable?

A: Yes. Both connectors share identical mechanical specifications including pitch (0.100"), row spacing (0.059"), mounting configuration (free hanging in-line), and physical form factor. They are fully interchangeable in mechanical assembly.

Q: Can the 7-215083-6 substitute be used with existing 215083-6 mating connectors?

A: Yes. Both parts are from the TE Connectivity Micro-MaTch series with identical contact geometry, pitch, and row spacing. The substitute part mates with all connectors designed for the 215083-6 specification.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts feature identical contact type (male pin), contact finish (tin), and wire gauge rating (28 AWG). Electrical performance characteristics are equivalent.

Q: What is the significance of the different part numbers (215083-6 versus 7-215083-6)?

A: The part numbers reflect different manufacturing or distribution designations within TE Connectivity's product line. The "7-" prefix in 7-215083-6 does not indicate a design revision or functional change. Both parts maintain the same base product number (215083) and are functionally identical.

Q: Which part should be selected for new designs?

A: Selection should be based on supply chain requirements and regulatory documentation needs. Both parts are active production items with ROHS3 compliance. The 7-215083-6 offers higher inventory availability and explicit REACH Unaffected status.

Q: Are both parts suitable for ribbon cable termination at 28 AWG?

A: Yes. Both connectors are specified for IDC termination on 28 AWG ribbon cable. The IDC contact design and wire gauge rating are identical across both parts.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. These connectors do not require special moisture control during storage or handling.