TE Connectivity AMP Connectors 2-1393637-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-1393637-9 is a 96-position DIN receptacle connector with female sockets, designed for backplane applications requiring through-hole mounting. This connector features gold or gold-palladium contact finish and operates across an extended temperature range of -55°C to 125°C. The part is currently active in production with 828 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, allowing for design flexibility, supply chain alternatives, or inventory optimization without compromising connector performance in the target application.

Substiute Parts

2-1393637-9

TE Connectivity AMP ConnectorsIn Stock: 9072-1393637-9 Datasheet

Current PartRFQ

09032966411

HARTINGIn Stock: 85209032966411 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 2-1393637-9 is determined by strict alignment of the following critical parameters:

Electrical Compatibility Parameters:

• Connector type: Receptacle, female sockets
• Number of positions: 96
• Pitch: 0.100" (2.54mm)
• Number of rows: 3
• Style: C
• Contact finish: Gold or gold-palladium

Mechanical Compatibility Parameters:

• Mounting type: Through hole
• Insulation material: Polybutylene terephthalate (PBT), glass filled
• Material flammability rating: UL94 V-0

Environmental & Compliance Parameters:

• Moisture sensitivity level: 1 (unlimited)
• RoHS compliance status

The HARTING 09032966411 meets all critical electrical and mechanical parameters, confirming its status as a direct substitute within the DIN 41612 standard family.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 2-1393637-9 and HARTING 09032966411 are active production parts with full RoHS compliance and UL94 V-0 flammability certification. Both connectors maintain identical electrical and mechanical specifications for the 96-position, 3-row DIN configuration with 0.100" pitch and through-hole mounting.

The primary distinction between these parts lies in operating temperature range. The TE Connectivity part operates from -55°C to 125°C, while the HARTING part operates from -40°C to 105°C. Selection between these parts should be based on the specific thermal requirements of the target application. Applications requiring operation below -40°C or above 105°C necessitate the TE Connectivity part.

Both parts are available in current inventory with comparable stock levels, supporting supply chain flexibility.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09032966411 be used as a direct replacement for the TE Connectivity 2-1393637-9?

A: The HARTING 09032966411 is electrically and mechanically compatible with the TE Connectivity 2-1393637-9 for applications operating within the temperature range of -40°C to 105°C. Both connectors share identical position count, pitch, row configuration, mounting type, and contact finish specifications. Applications requiring operation outside this temperature window require the TE Connectivity part.

Q: What are the key compatibility criteria for DIN 41612 96-position receptacle connectors?

A: Critical compatibility parameters include 96-position count, 0.100" (2.54mm) pitch, 3-row configuration, Style C designation, through-hole mounting, and gold or gold-palladium contact finish. Both parts meet these specifications and are classified as Level/Class 2 connectors.

Q: Are there differences in termination options between these parts?

A: The TE Connectivity 2-1393637-9 supports both press-fit and wire wrap termination methods. The HARTING 09032966411 supports press-fit termination. Applications requiring wire wrap termination must use the TE Connectivity part.

Q: Do both parts meet current environmental compliance standards?

A: Both parts are RoHS compliant and carry UL94 V-0 flammability certification. The TE Connectivity part is RoHS Compliant, while the HARTING part is ROHS3 Compliant. Both meet current regulatory requirements for backplane connector applications.

Q: What is the moisture sensitivity level for these connectors?

A: Both the TE Connectivity 2-1393637-9 and HARTING 09032966411 are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.