TE Connectivity AMP Connectors 2-1393481-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-1393481-1 is a 9 Position D-Sub Receptacle connector with female sockets, designed for right-angle press-fit applications. This connector belongs to the AMPLIMITE HD-20 series and is classified as a D-Sub, D-Shaped Connector. The part is currently in active inventory with 709 pieces available as new original stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across connector category, position count, socket configuration, mounting orientation, and termination method. Alternative sources ensure design continuity and supply chain flexibility for applications requiring D-Sub receptacle connectivity.

Substiute Parts

2-1393481-1

TE Connectivity AMP ConnectorsIn Stock: 8132-1393481-1 Datasheet

Current PartRFQ

D09S13A4GL00LF

Amphenol ICC (FCI)In Stock: 2878D09S13A4GL00LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 2-1393481-1 is determined by strict equivalence across the following parameters:

Primary Substitution Criteria:

• Connector Category: D-Sub, D-Shaped Connectors
• Connector Type: Receptacle with Female Sockets
• Number of Positions: 9
• Number of Rows: 2
• Shell Size/Connector Layout: 1 (DE, E)
• Mounting Orientation: Right Angle

Secondary Compatibility Parameters:

• Termination Method: Solder (substitute) versus Press-Fit (main part)
• Contact Type: Signal
• Voltage Rating: 300V minimum
• Current Rating: 5A per Contact minimum
• Operating Temperature Range: -55°C to 125°C
• Shell Material: Steel with Tin-Nickel Plating
• Contact Material: Phosphor Bronze with Gold Finish
• Dielectric Material: Polybutylene Terephthalate (PBT)
• Flange Feature: Housing/Shell (M3)
• Compliance: UL94 V-0, RoHS3 Compliant, REACH Affected

The substitute part D09S13A4GL00LF from Amphenol ICC (FCI) maintains electrical and mechanical compatibility through equivalent position count, socket configuration, shell size, and right-angle mounting. The termination method differs (solder versus press-fit), which represents a functional substitution pathway for applications where solder termination is acceptable.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 2-1393481-1 and the Amphenol ICC D09S13A4GL00LF maintain active product status and full compliance with RoHS3 and REACH regulations. Both connectors are UL94 V-0 rated and operate across the identical temperature range of -55°C to 125°C.

The primary distinction between these parts is the termination method. The TE Connectivity part utilizes press-fit termination, while the Amphenol ICC substitute employs solder termination. This difference requires evaluation based on the specific application's assembly process and PCB design requirements.

Both connectors support equivalent electrical performance with 5A per contact at 300V rating and maintain identical mechanical compatibility through 9-position, 2-row configuration with DE/E shell size and right-angle mounting orientation.

Selection between these parts should be based on termination method compatibility with the target application's assembly methodology and PCB layout specifications.

Frequently Asked Questions (FAQ)

Q: Can the D09S13A4GL00LF substitute for the 2-1393481-1 in all applications?

A: Electrical and mechanical compatibility is maintained across both connectors. The primary consideration is termination method: the TE Connectivity part uses press-fit termination while the Amphenol ICC part uses solder termination. Substitution is valid only when the application's assembly process and PCB design accommodate solder termination.

Q: Are the connector positions and shell sizes identical?

A: Yes. Both connectors feature 9 positions arranged in 2 rows with DE/E shell size (Shell Size 1) configuration. Pin layout and spacing are equivalent.

Q: What is the difference in packaging between these parts?

A: The TE Connectivity 2-1393481-1 packaging specification is not provided in the available data. The Amphenol ICC D09S13A4GL00LF is supplied in Tray packaging.

Q: Do both parts meet the same compliance standards?

A: Yes. Both connectors are RoHS3 compliant, REACH affected, and rated UL94 V-0 for material flammability. Both operate across -55°C to 125°C temperature range.

Q: What is the voltage and current rating for these connectors?

A: Both connectors are rated for 300V and support 5A per contact, making them suitable for equivalent signal and power distribution applications within these electrical parameters.

Q: Are the contact materials the same?

A: Yes. Both connectors use Phosphor Bronze contacts with Gold finish (Flash thickness on the Amphenol ICC part), ensuring equivalent contact performance and reliability.

Q: What mounting orientation do these connectors support?

A: Both connectors are configured for right-angle mounting. The TE Connectivity part uses press-fit mounting, while the Amphenol ICC part uses through-hole solder mounting.