TE Connectivity AMP Connectors 2132189-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2132189-9 is a 9-position rectangular connector receptacle housing designed for 0.156" (3.96mm) pitch applications. This component is a receptacle housing with female socket contacts, utilizing crimp termination and locking ramp fastening. The part is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the primary part number is unavailable or when inventory constraints necessitate alternative sourcing from the same manufacturer series.

Substiute Parts

2132189-9

TE Connectivity AMP ConnectorsIn Stock: 7592132189-9 Datasheet

Current PartRFQ

640250-9

TE Connectivity AMP ConnectorsIn Stock: 2010640250-9 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 2132189-9 are identified based on strict parametric equivalence within the SL-156 series. The substitution logic is based on the following critical parameters that must remain constant:

• Connector type (Receptacle)
• Contact type (Female Socket)
• Number of positions (9)
• Pitch specification (0.156" / 3.96mm)
• Number of rows (1)
• Mounting configuration (Free Hanging In-Line)
• Contact termination method (Crimp)
• Fastening mechanism (Locking Ramp)
• Insulation material (Polyamide/Nylon)
• Operating temperature range (-55°C ~ 105°C)
• Moisture sensitivity level (MSL 1)

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. The 640250-9 part number satisfies all specified criteria and is therefore a valid substitute for the 2132189-9.

Parameter Comparison

Engineering Selection Recommendations

Both the 2132189-9 and 640250-9 are Active product status components manufactured by TE Connectivity within the SL-156 series. Both parts are RoHS compliant, meeting environmental regulatory requirements. The 640250-9 substitute part maintains full parametric equivalence across all electrical and mechanical specifications, including connector type, contact configuration, pitch, termination method, and operating temperature range.

Selection between these parts should be based on inventory availability and lead time requirements. The 640250-9 currently maintains higher inventory levels (1993 pieces) compared to the 2132189-9 (711 pieces), which may influence procurement decisions. Both parts are packaged in bulk and carry MSL 1 rating, indicating no moisture sensitivity constraints during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can the 640250-9 be used as a direct replacement for the 2132189-9?

A: Yes. The 640250-9 is a parametric equivalent substitute. All critical electrical and mechanical parameters are identical, including connector type, number of positions, pitch, contact termination, fastening mechanism, insulation material, and operating temperature range.

Q: Are there any differences in compliance or certification between these parts?

A: Both parts are Active status and RoHS compliant. The 2132189-9 carries RoHS3 certification while the 640250-9 carries RoHS certification. Both meet environmental regulatory requirements for their respective applications.

Q: What is the significance of the different base product numbers (2132189 vs. 640250)?

A: The base product numbers represent different part number series within TE Connectivity's catalog. However, both parts belong to the SL-156 series and share identical functional specifications for 9-position, 0.156" pitch receptacle housings.

Q: Are contacts included with these connector housings?

A: No. Both the 2132189-9 and 640250-9 are connector housings only. Contacts are not included and must be sourced separately.

Q: What is the MSL rating and why is it relevant?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity constraints. These components can be stored and handled without special moisture control measures or baking requirements prior to assembly.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. The identical pitch, position count, mounting type, and contact termination method ensure mechanical and electrical interchangeability in applications designed for 0.156" (3.96mm) pitch, 9-position rectangular connectors with crimp termination.