Bourns 2114-V 150µH Toroidal Inductor Equivalent & Substitute Parts

Part Overview

The Bourns 2114-V is a 150µH unshielded toroidal inductor rated for 3.4A continuous current with a maximum DC resistance of 62mOhm. This through-hole component is designed for radial, vertical mounting in applications requiring fixed inductance values with moderate current handling capability.

The 2114-V carries an obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production or repair requirements for systems utilizing this inductor specification.

Substiute Parts

2114-V

Bourns Inc.In Stock: 10872114-V Datasheet

Current PartRFQ

2114-V-RC

Bourns Inc.In Stock: 21682114-V-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 2114-V is determined by strict equivalence across the following electrical and mechanical parameters:

• Inductance value: 150 µH
• Inductance tolerance: ±15%
• Current rating: 3.4 A minimum
• DC resistance: 62 mOhm maximum
• Toroidal core type, unshielded configuration
• Through-hole mounting, radial vertical orientation
• Physical dimensions: 0.860" Dia x 0.450" W
• Operating temperature range: -55°C to 105°C
• Test frequency: 1 kHz

The substitute part 2114-V-RC meets all these criteria and is manufactured by the same supplier (Bourns Inc.) within the same 2100 series product line.

Parameter Comparison

Engineering Selection Recommendations

The 2114-V-RC is the direct substitute for the obsolete 2114-V. Both components are electrically and mechanically identical across all specified parameters. The primary distinction is product status and regulatory compliance.

The 2114-V-RC carries active product status, ensuring continued availability and supply chain support. The 2114-V-RC is ROHS3 compliant, whereas the original 2114-V is non-compliant. For new designs or systems requiring regulatory compliance with current environmental standards, the 2114-V-RC is the appropriate selection. Both parts maintain identical REACH and ECCN classifications.

Frequently Asked Questions (FAQ)

Q: Can the 2114-V-RC be used as a direct replacement for the 2114-V?

A: Yes. The 2114-V-RC is electrically and mechanically equivalent to the 2114-V across all specified parameters: 150µH inductance, ±15% tolerance, 3.4A current rating, 62mOhm maximum DC resistance, toroidal unshielded configuration, through-hole radial vertical mounting, identical physical dimensions, and -55°C to 105°C operating temperature range.

Q: What is the difference between the 2114-V and 2114-V-RC?

A: The primary differences are product status and regulatory compliance. The 2114-V is obsolete and RoHS non-compliant. The 2114-V-RC is active and ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Are there packaging differences between these parts?

A: The 2114-V is supplied in standard packaging, while the 2114-V-RC is supplied in bulk packaging. Both use identical through-hole radial vertical (open) case configuration with 0.860" diameter and 0.450" width dimensions.

Q: What inductance tolerance should be expected?

A: Both the 2114-V and 2114-V-RC are specified with ±15% inductance tolerance, measured at 1 kHz test frequency.

Q: Are these parts suitable for high-temperature applications?

A: Both components are rated for operation across -55°C to 105°C. Applications requiring operation within this temperature range are supported by both parts.