TE Connectivity AMP Connectors 2-103634-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-103634-8 is a rectangular connector header designed for through-hole, right-angle board-to-board or cable applications. This 16-position connector operates at 0.100" (2.54mm) pitch and is classified as Active product status. The connector features shrouded 4-wall construction with solder termination and latch holder fastening. Finding equivalent substitute parts becomes necessary when managing inventory constraints, addressing supply chain disruptions, or optimizing component procurement across manufacturing operations.

Substiute Parts

2-103634-8

TE Connectivity AMP ConnectorsIn Stock: 10422-103634-8 Datasheet

Current PartRFQ

0705530015

MolexIn Stock: 43930705530015 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part identification for the TE Connectivity 2-103634-8 is based on strict alignment of critical electrical and mechanical parameters. The primary substitution criteria include:

Critical Matching Parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 16
• Number of Rows: 1
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Fastening Type: Latch Holder
• Contact Shape: Square
• Material Flammability Rating: UL94 V-0

The Molex 0705530015 meets all critical matching parameters and qualifies as a direct substitute. Both connectors share identical positioning architecture, mounting methodology, and safety certifications. Variations in contact finish materials, insulation composition, and operating temperature ranges represent secondary differences that do not preclude substitution within standard industrial applications.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 2-103634-8 and Molex 0705530015 maintain Active product status, ensuring continued manufacturer support and availability. Both connectors achieve UL94 V-0 material flammability certification and comply with RoHS directives, meeting regulatory requirements for automotive, medical, industrial, and general-purpose applications.

The TE Connectivity 2-103634-8 operates across an extended temperature range of -65°C to 105°C and carries a 3A current rating. The Molex 0705530015 operates from -40°C to 105°C with a 250V voltage rating specification. Selection between these parts depends on application-specific temperature extremes and voltage requirements. Both connectors employ identical mechanical architecture, pitch spacing, and mounting methodology, supporting direct substitution in standard circuit board assembly operations.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0705530015 directly replace the TE Connectivity 2-103634-8 in existing designs?

A: Yes. Both connectors share identical connector type, contact configuration, pitch spacing, mounting orientation, shrouding design, and fastening methodology. The 16-position, single-row, 0.100" pitch architecture is mechanically and electrically compatible.

Q: What are the key differences between these two connectors?

A: Primary differences include contact finish material (Tin versus Gold), contact base material (Brass versus Phosphor Bronze), insulation composition (Thermoplastic versus Polyester Glass Filled), and operating temperature range (-65°C to 105°C versus -40°C to 105°C). The Molex part specifies a 250V voltage rating while the TE Connectivity part specifies a 3A current rating.

Q: Are both connectors suitable for automotive applications?

A: Yes. Both connectors list automotive applications within their specified use cases and maintain UL94 V-0 flammability certification required for automotive component qualification.

Q: What is the significance of the contact finish difference?

A: The TE Connectivity connector uses tin-plated contacts while the Molex connector uses gold-plated contacts. Gold plating provides enhanced corrosion resistance and contact reliability in high-reliability applications. Tin plating is suitable for standard industrial and general-purpose applications.

Q: Do both connectors require the same PCB footprint?

A: Yes. Both connectors maintain identical pitch spacing (0.100"), position count (16), row configuration (1 row), and through-hole mounting methodology, supporting the same PCB footprint design.

Q: What is the moisture sensitivity level for both connectors?

A: Both connectors carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions during storage or handling.

Q: Are there any compliance or certification differences?

A: Both connectors achieve UL94 V-0 flammability certification. The TE Connectivity part is RoHS Compliant while the Molex part is ROHS3 Compliant. Both maintain EAR99 ECCN classification and identical HTSUS codes.