Equivalent & Substitute Parts for 20ETF12S

Part Overview

The 20ETF12S is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, rated for 1200 V DC reverse voltage and 20 A average rectified current in a surface mount TO-263AB (D2PAK) package. This part is classified as obsolete, necessitating identification of active equivalent and substitute components for new designs and production continuity. Equivalent parts maintain identical electrical and mechanical specifications, while substitute parts provide functional alternatives with allowable parameter variations within the same package family.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	1200	V
Current - Average Rectified (Io)	20	A
Voltage - Forward (Vf) (Max) @ If	1.31 V @ 20 A	V
Speed Classification	Fast Recovery ≤ 500ns, > 200mA (Io)	—
Reverse Recovery Time (trr)	400	ns
Current - Reverse Leakage @ Vr	100 µA @ 1200 V	µA
Mounting Type	Surface Mount	—
Package / Case	TO-263-3, D2PAK (2 Leads + Tab), TO-263AB	—
Operating Temperature - Junction	-40 to 150	°C
Technology	Standard	—
RoHS Status	RoHS non-compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the 20ETF12S is determined by the following critical parameters: voltage rating (1200 V DC reverse), current rating (20 A average rectified), package type (TO-263AB D2PAK surface mount), and recovery speed classification (fast recovery ≤ 500ns). Equivalent parts must match all electrical specifications and package dimensions. Substitute parts from alternative manufacturers may exhibit variations in forward voltage, reverse recovery time, reverse leakage current, and maximum junction temperature while maintaining compatibility within the same package footprint and voltage/current envelope.

The substitute parts are grouped as follows:

Parametric Equivalents (Vishay): VS-20ETF12STRL-M3 and VS-20ETF12STRR-M3 maintain identical electrical characteristics to the 20ETF12S (1200 V, 20 A, 1.31 V forward voltage, 400 ns recovery time, 100 µA leakage) and differ only in packaging format (Tape & Reel) and product status (Active). These parts are direct functional replacements with improved RoHS3 compliance.

Manufacturer Recommended Substitutes (STMicroelectronics): STTH1512G and STTH1512G-TR are cross-manufacturer alternatives with identical voltage rating (1200 V) and package type (D2PAK) but reduced current rating (15 A versus 20 A), higher forward voltage (2.1 V @ 15 A), lower reverse leakage (15 µA), and faster recovery time (105 ns). These parts are suitable for applications where the 20 A current requirement is not mandatory.

Parameter Comparison

Parameter	20ETF12S	VS-20ETF12STRL-M3	VS-20ETF12STRR-M3	STTH1512G	STTH1512G-TR
Manufacturer	Vishay	Vishay	Vishay	STMicroelectronics	STMicroelectronics
Voltage - DC Reverse (Vr) (Max)	1200 V	1200 V	1200 V	1200 V	1200 V
Current - Average Rectified (Io)	20 A	20 A	20 A	15 A	15 A
Voltage - Forward (Vf) (Max) @ If	1.31 V @ 20 A	1.31 V @ 20 A	1.31 V @ 20 A	2.1 V @ 15 A	2.1 V @ 15 A
Reverse Recovery Time (trr)	400 ns	400 ns	400 ns	105 ns	105 ns
Current - Reverse Leakage @ Vr	100 µA @ 1200 V	100 µA @ 1200 V	100 µA @ 1200 V	15 µA @ 1200 V	15 µA @ 1200 V
Speed Classification	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA
Package / Case	TO-263-3, D2PAK	TO-263-3, D2PAK	TO-263-3, D2PAK	TO-263-3, D2PAK	TO-263-3, D2PAK
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Operating Temperature - Junction (Max)	150°C	150°C	150°C	175°C	175°C
Product Status	Obsolete	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Packaging Format	Bulk	Tape & Reel (TR)	Tape & Reel (TR)	Tube	Cut Tape (CT) & Digi-Reel®

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): Select VS-20ETF12STRL-M3 or VS-20ETF12STRR-M3 when the application requires exact electrical equivalence to the 20ETF12S. Both parts maintain the 20 A current rating, 1.31 V forward voltage, and 400 ns recovery time. These Vishay parts are active products with ROHS3 compliance, addressing the obsolescence and regulatory status of the original component. The choice between STRL-M3 and STRR-M3 variants depends on packaging and supply chain requirements; both are functionally identical.

For Cross-Manufacturer Substitution: Select STTH1512G or STTH1512G-TR when design flexibility permits operation at reduced current levels (15 A maximum versus 20 A). The STMicroelectronics alternatives offer superior performance characteristics including faster recovery time (105 ns versus 400 ns), lower reverse leakage current (15 µA versus 100 µA), and higher maximum junction temperature (175°C versus 150°C). These parts are suitable for applications where the 20 A rating provides design margin and the improved performance characteristics are beneficial. STTH1512G-TR offers superior availability in Cut Tape and Digi-Reel® packaging formats.

Compliance Considerations: All substitute parts are ROHS3 compliant and REACH unaffected, addressing regulatory requirements that the obsolete 20ETF12S does not meet. Selection should prioritize active products with current manufacturing status to ensure long-term supply continuity.

Frequently Asked Questions (FAQ)

Q: Can VS-20ETF12STRL-M3 or VS-20ETF12STRR-M3 be used as direct replacements for 20ETF12S?

A: Yes. Both parts are parametric equivalents with identical voltage rating (1200 V), current rating (20 A), forward voltage (1.31 V @ 20 A), reverse recovery time (400 ns), and reverse leakage current (100 µA @ 1200 V). They share the same TO-263AB D2PAK package and surface mount configuration. The primary differences are product status (active versus obsolete) and packaging format (Tape & Reel versus bulk).

Q: What are the limitations of STTH1512G and STTH1512G-TR as substitutes?

A: The STMicroelectronics parts have a reduced average rectified current rating of 15 A compared to the 20 A rating of the 20ETF12S. Applications requiring the full 20 A capability cannot use these parts. Additionally, forward voltage is higher at 2.1 V @ 15 A versus 1.31 V @ 20 A, which affects power dissipation calculations. These parts are suitable only for designs where the 15 A rating provides adequate margin.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All listed parts use the TO-263-3 D2PAK package with identical lead configuration and dimensions. PCB footprints designed for the 20ETF12S accommodate all substitute parts without modification.

Q: What is the difference between VS-20ETF12STRL-M3 and VS-20ETF12STRR-M3?

A: Both parts are electrically identical with matching specifications. The designations STRL-M3 and STRR-M3 indicate different tape configurations within the Tape & Reel packaging format. Selection depends on assembly equipment compatibility and supply chain preferences. Electrical performance and reliability are equivalent.

Q: Do the STMicroelectronics parts offer any performance advantages?

A: STTH1512G and STTH1512G-TR exhibit faster reverse recovery time (105 ns versus 400 ns), lower reverse leakage current (15 µA versus 100 µA), and higher maximum junction temperature rating (175°C versus 150°C). These characteristics reduce switching losses and improve thermal performance in high-frequency applications. However, these advantages apply only within the 15 A current envelope.

Q: Which substitute part offers the best availability?

A: STTH1512G-TR provides the highest inventory level (34,200 pieces) and is available in Cut Tape and Digi-Reel® packaging, offering flexibility for both manual and automated assembly processes.

Q: Are all substitute parts RoHS compliant?

A: Yes. VS-20ETF12STRL-M3, VS-20ETF12STRR-M3, STTH1512G, and STTH1512G-TR are all ROHS3 compliant. The original 20ETF12S is RoHS non-compliant, making the substitute parts necessary for applications subject to RoHS regulations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message