HDMI Receptacle Connector 2069486-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors model 2069486-1 is an HDMI receptacle connector featuring 19 positions, surface mount right-angle configuration with through-hole termination capability. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design requirements and procurement needs. The connector supports standard HDMI applications with a rated current of 0.5A and operating temperature range of -30°C to 85°C.

Substiute Parts

2069486-1

TE Connectivity AMP ConnectorsIn Stock: 9092069486-1 Datasheet

Current PartRFQ

10029449-111RLF

Amphenol ICC (FCI)In Stock: 414410029449-111RLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 2069486-1 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: HDMI
• Number of Contacts: 19 positions
• Gender: Receptacle
• Mounting Type: Surface Mount, Right Angle with Through Hole capability
• Termination Method: Solder
• Number of Ports: 1
• Current Rating: 0.5A minimum
• Voltage Rating: 40V or greater
• Mating Cycles: 10000 minimum

Compliance Parameters:

• RoHS compliance status
• Moisture Sensitivity Level: 1 (Unlimited)
• ECCN classification: EAR99

The substitute part 10029449-111RLF manufactured by Amphenol ICC (FCI) satisfies all mandatory matching parameters and maintains equivalent electrical and mechanical specifications. This part is classified as active product status, ensuring ongoing availability and supply chain continuity.

Parameter Comparison

Engineering Selection Recommendations

The Amphenol ICC part number 10029449-111RLF is the qualified substitute for the obsolete TE Connectivity 2069486-1 HDMI receptacle connector. Selection of this substitute is supported by the following engineering criteria:

Product Status Alignment: The substitute part maintains active product status, ensuring long-term availability, supply chain stability, and manufacturer support. The original part's obsolete classification creates procurement risk and supply discontinuity.

Electrical and Mechanical Equivalence: Both connectors maintain identical specifications across all critical parameters including 19-position contact count, 0.5A current rating, 40V voltage rating, 10000 mating cycle rating, and solder termination method. The surface mount right-angle configuration with through-hole capability is preserved.

Compliance Certification: The substitute part maintains RoHS compliance and EAR99 ECCN classification consistent with the original part. Both components carry MSL Level 1 (Unlimited) moisture sensitivity rating, eliminating moisture management constraints during storage and handling.

Operating Temperature Consideration: The substitute part operates across -20°C to 85°C, which encompasses the majority of the original part's -30°C to 85°C range. Applications requiring operation below -20°C require specific thermal analysis against the substitute part's lower temperature limit.

HDMI Specification Enhancement: The substitute part is specified as HDMI 1.4 compliant, providing enhanced protocol support while maintaining backward compatibility with standard HDMI implementations.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 10029449-111RLF directly replace the TE Connectivity 2069486-1 in existing designs?

A: Yes. Both connectors share identical mechanical mounting configurations (surface mount, right angle, through hole), electrical ratings (0.5A, 40V), contact count (19 positions), and termination method (solder). PCB footprint compatibility requires verification against original design documentation.

Q: What is the significance of the HDMI 1.4 specification on the substitute part?

A: HDMI 1.4 represents an enhanced protocol version that maintains full backward compatibility with standard HDMI implementations. The substitute part supports HDMI 1.4 features while functioning identically to the original part in standard HDMI applications.

Q: Are there packaging differences between the original and substitute parts?

A: The original part 2069486-1 packaging information is not specified in available documentation. The substitute part 10029449-111RLF is supplied in Cut Tape (CT) and Digi-Reel® packaging formats. Packaging selection should align with assembly process requirements and volume specifications.

Q: Does the operating temperature difference affect substitution suitability?

A: The substitute part operates from -20°C to 85°C compared to the original part's -30°C to 85°C range. For applications requiring operation below -20°C, thermal performance analysis is required. Standard commercial and industrial applications within the -20°C to 85°C range experience no functional limitation.

Q: What additional features does the substitute part provide?

A: The substitute part 10029449-111RLF includes shielding (shielded configuration), gold contact finish, and brass shell/shielding material. These features enhance electromagnetic interference rejection and contact durability compared to the original part specification.

Q: Are both parts RoHS compliant?

A: Yes. The original part 2069486-1 is ROHS3 compliant. The substitute part 10029449-111RLF is RoHS compliant. Both parts meet regulatory requirements for hazardous substance restrictions.

Q: What is the inventory status for the substitute part?

A: The Amphenol ICC 10029449-111RLF maintains active product status with 4068 pieces in current inventory. The original TE Connectivity part is obsolete with limited remaining stock (825 pieces).