CTS Electrocomponents 206-7LPST DIP Switch Equivalent & Substitute Parts

Part Overview

The CTS Electrocomponents 206-7LPST is a 7-position DIP switch with SPST circuit configuration, rated for 50mA at 24VDC. This through-hole mounted component features a slide actuator with flush/recessed level and gold-plated contacts. The part is Active status and ROHS3 compliant, making it suitable for applications requiring reliable switching in industrial and commercial environments. Equivalent and substitute parts are identified when design requirements allow for higher electrical ratings or when inventory constraints necessitate alternative sourcing.

Substiute Parts

206-7LPST

CTS ElectrocomponentsIn Stock: 928206-7LPST Datasheet

Current PartRFQ

78RB07ST

Grayhill Inc.In Stock: 530978RB07ST Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 206-7LPST are identified based on the following critical parameters that determine functional interchangeability:

Primary Matching Criteria:

• Circuit configuration: SPST
• Number of positions: 7
• Actuator type: Slide (Standard)
• Mounting type: Through Hole
• Pitch: 0.100" (2.54mm)
• Contact finish: Gold
• Actuator level: Flush, Recessed

Allowable Variation Parameters:

• Current rating: May be equal to or greater than 50mA
• Voltage rating: May be equal to or greater than 24VDC
• Operating temperature range: May be equal to or narrower than -55°C ~ 85°C
• Electrical life: May be equal to or greater than 10,000 cycles
• Height above board: Minor variations acceptable within mechanical constraints
• Body material: Plastic or thermoplastic acceptable

The Grayhill Inc. 78RB07ST meets all primary matching criteria and exceeds the electrical performance specifications of the main part.

Parameter Comparison

Engineering Selection Recommendations

206-7LPST (CTS Electrocomponents): Select this part when the application requires extended electrical life of 10,000 cycles or when operating temperatures below -40°C are specified. This part is Active status with full ROHS3 compliance and REACH unaffected certification.

78RB07ST (Grayhill Inc.): Select this part when higher current capacity (150mA) or higher voltage rating (30VDC) is required within the operating temperature range of -40°C to 85°C. This part is Active status with ROHS3 compliance and REACH unaffected certification. The lower profile height (0.265" vs 0.299") may provide advantages in space-constrained PCB layouts. Note that electrical life is rated at 2,000 cycles, which is lower than the main part.

Both parts are Active status products with equivalent compliance certifications, ensuring long-term availability and regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can the 78RB07ST replace the 206-7LPST in all applications?

A: The 78RB07ST is mechanically and functionally compatible for applications operating within -40°C to 85°C with switching cycles not exceeding 2,000 cycles. If your application requires operation below -40°C or exceeds 2,000 switching cycles, the 206-7LPST is required.

Q: What are the key differences between these two parts?

A: The primary differences are electrical life (10,000 vs 2,000 cycles), operating temperature minimum (-55°C vs -40°C), and current/voltage ratings (50mA/24VDC vs 150mA/30VDC). All other parameters including circuit configuration, position count, actuator type, pitch, and contact finish are identical.

Q: Are both parts available in the same packaging?

A: Yes, both parts are supplied in Tube packaging with 0.100" (2.54mm) pitch and PC Pin termination, ensuring identical PCB footprint compatibility.

Q: Which part should I select for a new design?

A: Base your selection on the specific electrical requirements and operating conditions of your application. If current and voltage requirements are within 50mA and 24VDC respectively, and operating temperature remains above -40°C with fewer than 2,000 switching cycles, either part is suitable. For higher performance margins or extended temperature operation, select the 206-7LPST.

Q: Are both parts RoHS compliant?

A: Yes, both the 206-7LPST and 78RB07ST are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.