2064-22-01RP2 Equivalent & Substitute Parts

Part Overview

The NorComp Inc. 2064-22-01RP2 is a 22-position rectangular receptacle connector with 0.079" (2.00mm) pitch, designed for through-hole PCB mounting with gold-plated mating contacts. This connector is classified as obsolete, making equivalent substitute parts necessary for ongoing production, maintenance, and design updates. Active alternatives from Molex and Mill-Max Manufacturing Corp. provide functional equivalence while maintaining compatibility with the original electrical and mechanical specifications.

Substiute Parts

2064-22-01RP2

NorComp Inc.In Stock: 8872064-22-01RP2 Datasheet

Current PartRFQ

0791077060

MolexIn Stock: 7400791077060 Datasheet

SimilarRFQ

0791077210

MolexIn Stock: 11440791077210 Datasheet

SimilarRFQ

833-13-022-10-002000

Mill-Max Manufacturing Corp.In Stock: 1147833-13-022-10-002000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following critical parameters:

• Connector Type & Contact Configuration: All substitutes must be receptacle connectors with female socket contacts
• Position Count & Pitch: 22 positions at 0.079" (2.00mm) mating pitch with 2-row configuration
• Mounting & Termination: Through-hole PCB mounting with solder termination
• Fastening Mechanism: Push-pull fastening type
• Mating Contact Finish: Gold plating on mating surfaces
• Insulation Material: Thermoplastic or equivalent glass-filled polymer

The three substitute parts (Molex 0791077060, Molex 0791077210, and Mill-Max 833-13-022-10-002000) meet these core electrical and mechanical requirements, enabling direct functional replacement in applications originally designed for the 2064-22-01RP2.

Parameter Comparison

Engineering Selection Recommendations

Molex 0791077060 and 0791077210 are the primary substitutes for the obsolete NorComp 2064-22-01RP2. Both are active products from the Molex Milli-Grid 79107 series and maintain ROHS3 compliance. The 0791077060 matches the original contact post length (0.118" / 3.00mm), while the 0791077210 features a shorter post length (0.075" / 1.91mm). Selection between these two Molex alternatives depends on PCB hole depth and assembly requirements. Both provide operating temperature range (-55°C ~ 125°C) and specified current/voltage ratings (1A / 125V) not documented in the original part.

Mill-Max 833-13-022-10-002000 provides an alternative with higher current capacity (3A) and gold-plated posts. However, this part is RoHS non-compliant and uses beryllium copper contacts with PCT/polyester insulation, introducing material and compliance differences. Selection of this substitute requires confirmation that RoHS non-compliance is acceptable for the application.

For new designs and production requiring regulatory compliance, Molex alternatives are preferred. For legacy applications where RoHS compliance is not mandated, Mill-Max 833-13-022-10-002000 offers enhanced current handling capability.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0791077210 be used as a direct replacement if my PCB design uses the original 0.118" post length?

A: The 0791077210 has a shorter post length (0.075" / 1.91mm) compared to the original 2064-22-01RP2 (0.118" / 3.00mm). Direct substitution requires PCB hole depth verification. Use Molex 0791077060 for identical post length compatibility.

Q: What is the difference between the two Molex substitutes?

A: Both Molex parts (0791077060 and 0791077210) are from the same Milli-Grid 79107 series with identical electrical specifications. The primary difference is contact post length: 0791077060 matches the original 0.118" length, while 0791077210 is shorter at 0.075". Insulation height also differs slightly (0.175" vs. original 0.177").

Q: Is the Mill-Max 833-13-022-10-002000 suitable for RoHS-regulated applications?

A: No. The Mill-Max part is RoHS non-compliant. Use only in applications where RoHS compliance is not required. For RoHS-compliant designs, select Molex 0791077060 or 0791077210.

Q: What is the significance of the higher gold plating thickness on the Molex 0791077060?

A: The Molex 0791077060 provides 30.0µin (0.76µm) gold plating on mating contacts, compared to 15.0µin (0.38µm) on the original part. This increased thickness provides enhanced corrosion resistance and contact durability in demanding environments.

Q: Can I use the Mill-Max part for higher current applications?

A: Yes. The Mill-Max 833-13-022-10-002000 supports 3A current capacity, compared to 1A for the Molex alternatives. However, confirm that RoHS non-compliance and material differences (beryllium copper contacts, PCT/polyester insulation) are acceptable for your application before selection.

Q: Are all substitutes compatible with the same mating connectors?

A: Yes. All substitute parts maintain the same 22-position, 0.079" (2.00mm) pitch configuration with push-pull fastening, ensuring compatibility with original mating plugs and connectors designed for the 2064-22-01RP2.