Equivalent & Substitute Parts Reference: SICK 2039093 PHOTO ELECTRIC SENSOR

Part Overview

The SICK 2039093 Photo Electric Sensor is a through-beam optical sensor within the W4-3 series. It features a sensing distance of 0" ~ 157.480" (0m ~ 4m), PNP - Dark-ON output configuration, supply voltage range of 10V ~ 30V, response time of 500µs, a red (650nm) light source, M8 connector interface, and ingress protection ratings of IP66 and IP67. This model is classified as "Obsolete", necessitating the identification of equivalent or substitute parts to fulfill ongoing project, maintenance, or application requirements.

Substiute Parts

2039093

SICK, Inc.In Stock: 10852039093 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SICK 2039093 Photo Electric Sensor must match the following key parameters:

• Sensing Method: Through-Beam
• Sensing Distance: 0" ~ 157.480" (0m ~ 4m)
• Output Configuration: PNP - Dark-ON
• Voltage - Supply: 10V ~ 30V
• Response Time: 500µs
• Light Source: Red (650nm)
• Connection Method: Connector, M8
• Ingress Protection: IP66, IP67
• Operating Temperature: -40°C ~ 60°C Only parts satisfying all listed criteria should be selected for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The SICK 2039093 part is listed as obsolete. For engineering continuity, substitute selections are dictated strictly by matching product status, part compliance, and provided environmental ratings. All candidate substitutes must display equivalent electrical, mechanical, and environmental parameters as explicitly listed above.

Frequently Asked Questions (FAQ)

Q1: What are the most critical parameters for substituting the SICK 2039093 Photo Electric Sensor?
A1: The critical parameters are sensing method (through-beam), sensing distance range, supply voltage, output configuration, response time, light source wavelength, connector type, ingress protection rating, and operating temperature range.

Q2: Does connector type and ingress protection affect substitute compatibility?
A2: Yes. Exact matching for connector method (M8) and ingress protection (IP66, IP67) is required for direct compatibility in systems using the original sensor.

Q3: Can parts outside the provided parameters be considered as substitutes?
A3: Only parts matching all the stated parameters are suitable substitutes. Deviations from these parameters are not permitted within this product category and selection criteria.

Q4: Does the 'Obsolete' status affect engineering selection?
A4: Yes. Obsolete status necessitates verifying substitutes for continued application use, ensuring strict equivalence to the original's technical and environmental specifications.

Q5: Are packaging and inventory relevant for substitution?
A5: Packaging type may influence assembly logistics; however, functional substitution is based solely on matching technical parameters. Inventory quantity does not affect engineering suitability.