TE Connectivity 202236-3 Pin Contact Gold Solder Eyelet Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 202236-3 is a stamped pin contact with gold solder eyelet termination, designed for the Multimate III+ connector series. This component functions as a mating pin element in connector assemblies, providing electrical continuity through solder eyelet attachment to printed circuit boards or wire harnesses. The part is currently active in production status with 1062 pieces available in inventory. Identification of equivalent and substitute parts becomes necessary when addressing RoHS compliance requirements, managing supply chain alternatives, or accommodating specific procurement specifications.

Substiute Parts

202236-3

TE Connectivity AMP ConnectorsIn Stock: 1146202236-3 Datasheet

Current PartRFQ

202236-8

TE Connectivity AMP ConnectorsIn Stock: 817202236-8 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 202236-3 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic requires that alternative parts maintain identical specifications in the following key areas:

Mandatory Equivalence Parameters:

• Series designation (Multimate III+)
• Contact type (Stamped pin)
• Pin or socket function (Pin)
• Contact termination method (Solder eyelet)
• Contact material (Brass)
• Contact finish (Gold)
• Contact finish thickness (30.0µin / 0.76µm)
• Moisture sensitivity level (MSL 1)
• Base product number (202236)

Compliance Considerations: Substitute parts may differ in RoHS compliance status and REACH classification, as these represent regulatory certifications rather than functional performance parameters. Parts meeting all electrical and mechanical criteria are classified as direct substitutes regardless of compliance designation.

Parameter Comparison

Engineering Selection Recommendations

202236-3 Selection Criteria: The 202236-3 is appropriate for applications where RoHS non-compliance is acceptable or where legacy system compatibility requires the original specification. This part maintains active production status and has established supply availability with 1062 units in current inventory.

202236-8 Selection Criteria: The 202236-8 provides functional equivalence to the 202236-3 with the addition of RoHS compliance certification and REACH unaffected status. This part is suitable for applications subject to RoHS regulatory requirements or procurement specifications mandating compliant components. The 202236-8 maintains identical electrical and mechanical performance characteristics while addressing regulatory compliance needs. Current inventory availability is 804 units.

Compliance-Driven Selection: When regulatory compliance is a project requirement, the 202236-8 is the appropriate selection. When legacy system compatibility or non-compliant component specifications are required, the 202236-3 remains the correct choice. Both parts are functionally interchangeable from an electrical and mechanical standpoint within the Multimate III+ connector system.

Frequently Asked Questions (FAQ)

Q: Are the 202236-3 and 202236-8 mechanically interchangeable?

A: Yes. Both parts are stamped pin contacts with identical geometry, material composition (brass), and solder eyelet termination. They are mechanically interchangeable within Multimate III+ connector assemblies.

Q: What is the primary difference between these two parts?

A: The primary difference is regulatory compliance status. The 202236-8 is RoHS compliant and REACH unaffected, while the 202236-3 is RoHS non-compliant with vendor-undefined REACH status. All electrical and mechanical specifications are identical.

Q: Can I substitute the 202236-8 for the 202236-3 in an existing design?

A: Yes, the 202236-8 provides complete functional equivalence. The substitution is valid from electrical, mechanical, and performance perspectives. Compliance requirements should drive the selection decision.

Q: Does the gold plating thickness differ between these parts?

A: No. Both parts specify 30.0µin (0.76µm) gold contact finish thickness. The plating specification is identical.

Q: Are there any packaging differences between these parts?

A: The 202236-3 is specified as bulk packaging. The 202236-8 packaging specification is not provided in the available data. Packaging should be confirmed with the supplier for procurement purposes.

Q: What is the moisture sensitivity level for both parts?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity constraints. Standard storage and handling practices apply.

Q: Which part should I specify for a new design?

A: Selection depends on regulatory requirements. For RoHS-compliant applications, specify the 202236-8. For applications without RoHS requirements, either part is acceptable based on availability and procurement specifications.

Q: Are both parts currently in production?

A: Yes. Both the 202236-3 and 202236-8 maintain active production status with current inventory availability.