Molex 2014442210 Rectangular Connector Plug Housing - Equivalent & Substitute Parts

Part Overview

The Molex 2014442210 is a 10-position rectangular connector plug housing from the Nano-Fit 201444 series. This component serves as the housing interface for male pin contacts in applications requiring a 2.50mm pitch configuration. The part is actively manufactured and maintained in production status. Identifying equivalent substitute parts becomes necessary when addressing supply chain constraints, inventory availability, or specific color requirements while maintaining identical electrical and mechanical compatibility.

Substiute Parts

2014442210

MolexIn Stock: 41102014442210 Datasheet

Current PartRFQ

2014441210

MolexIn Stock: 95492014441210 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular connector housings in the Nano-Fit 201444 series is determined by strict equivalence across the following critical parameters:

• Connector Type: Plug housing configuration
• Contact Type: Male pin interface
• Number of Positions: 10-position layout
• Pitch Specification: 0.098" (2.50mm) contact spacing
• Number of Rows: 2-row arrangement
• Row Spacing: 0.098" (2.50mm) inter-row distance
• Mounting Type: Panel Mount, Snap-In mechanism
• Contact Termination: Crimp termination method
• Fastening Type: Latch Holder retention system
• Insulation Material: Polyamide (PA66), Nylon 6/6 composition
• Operating Temperature Range: -40°C to 105°C capability
• Compliance Standards: ROHS3 Compliant, REACH Unaffected

The substitute part 2014441210 maintains identical specifications across all critical parameters. The only variance is the housing color (Natural versus Black), which does not affect electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 2014442210 and 2014441210 are active production parts with ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on application-specific requirements:

Molex 2014442210 (Natural Color): Select this part when natural housing color is specified in design documentation or when visual identification of connector type is required through standard color coding conventions.

Molex 2014441210 (Black Color): Select this part when black housing color is required for aesthetic integration, environmental protection, or when existing inventory uses black-colored housings from the Nano-Fit 201444 series.

Both parts share identical electrical performance, mechanical dimensions, mounting characteristics, and thermal operating ranges. The choice between them is determined solely by color specification requirements and does not impact circuit functionality or reliability.

Frequently Asked Questions (FAQ)

Q: Can Molex 2014441210 be used as a direct replacement for Molex 2014442210?

A: Yes. The 2014441210 is a parametric equivalent with identical electrical and mechanical specifications. The only difference is housing color (Black versus Natural). All contact positions, pitch spacing, mounting methods, and operating parameters are identical.

Q: Does housing color affect connector performance or compatibility?

A: No. Housing color is a cosmetic attribute and does not influence electrical performance, mechanical fit, or thermal characteristics. Both Natural and Black housings maintain identical contact alignment, mating force, and environmental protection.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both the 2014442210 and 2014441210 operate across the identical temperature range of -40°C to 105°C. Material composition and thermal properties are equivalent.

Q: What is the significance of the Nano-Fit 201444 series designation?

A: The Nano-Fit 201444 series identifies the connector family and establishes the standardized pitch (2.50mm), row configuration (2 rows), and contact interface specifications. Both substitute parts belong to this same series.

Q: Are contacts included with these housing parts?

A: No. Both the 2014442210 and 2014441210 are housing-only components. Male pin contacts must be sourced separately and crimped into the housing according to Molex specifications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 Compliant and REACH Unaffected, meeting identical regulatory requirements for hazardous substance restrictions and environmental compliance.