Request Quote
(Ships tomorrow)
SMB Right Angle Jack Male Gold Connector 2010-1511-017
Part Overview
The Radiall USA, Inc. 2010-1511-017 is an SMB coaxial connector jack with male pin configuration, designed for 50 Ohm RF applications. This through-hole, right-angle solder connector operates at frequencies up to 4 GHz and is rated for -65°C to 165°C operating temperature. The connector features gold-plated brass construction with PTFE dielectric material and snap-on fastening. Product status is Active with 1037 pieces in stock. Equivalent and substitute parts are necessary when primary inventory is unavailable, when alternative manufacturers are preferred for supply chain diversification, or when specific material or performance characteristics are required for particular applications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Style | SMB |
| Connector Type | Jack, Male Pin |
| Impedance | 50 Ohms |
| Mounting Type | Through Hole, Right Angle |
| Contact Termination | Solder |
| Shield Termination | Solder |
| Frequency Maximum | 4 GHz |
| Operating Temperature Range | -65°C to 165°C |
| Mating Cycles | 500 |
| Fastening Type | Snap-On |
| Dielectric Material | Polytetrafluoroethylene (PTFE) |
| Number of Ports | 1 |
| RoHS Status | ROHS3 Compliant |
Substitute Part Grouping Explanation
Substitute parts for the 2010-1511-017 are qualified based on the following critical parameters that must match or exceed the main part specifications:
Mandatory Matching Parameters:
- Connector Style: SMB
- Connector Type: Jack, Male Pin
- Impedance: 50 Ohms
- Mounting Type: Through Hole, Right Angle
- Contact Termination: Solder
- Shield Termination: Solder
- Frequency Maximum: 4 GHz
- Operating Temperature Range: -65°C to 165°C
- Mating Cycles: 500
- Fastening Type: Snap-On
- Dielectric Material: PTFE
- Number of Ports: 1
- RoHS Status: ROHS3 Compliant
All substitute parts listed meet these mandatory parameters. Variations in body material composition (brass versus zinc alloy), center contact material (brass versus beryllium copper), and insertion loss specifications do not preclude substitution when all mandatory electrical and mechanical parameters are satisfied. Voltage rating variations among substitutes indicate different design margins but do not affect functional compatibility in 50 Ohm RF applications.
Parameter Comparison
| Manufacturer Part Number | Manufacturer | Connector Style | Connector Type | Impedance | Mounting Type | Frequency Max | Operating Temperature | Mating Cycles | Insertion Loss | RoHS Status | Inventory |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2010-1511-017 | Radiall USA, Inc. | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | 0.6 dB | ROHS3 Compliant | 1037 Pcs |
| 2010-1511-000 | Radiall USA, Inc. | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | Not Specified | ROHS3 Compliant | 831 Pcs |
| R114665000 | Radiall USA, Inc. | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | Not Specified | ROHS3 Compliant | 1343 Pcs |
| R114665000W | Radiall USA, Inc. | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | Not Specified | ROHS3 Compliant | 808 Pcs |
| 1-1337481-0 | TE Connectivity AMP Connectors | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | 0.6 dB | ROHS3 Compliant | 2200 Pcs |
| 131-1701-371 | Cinch Connectivity Solutions | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | Not Specified | ROHS3 Compliant | 2808 Pcs |
| 131-3701-301 | Cinch Connectivity Solutions | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | Not Specified | ROHS3 Compliant | 5394 Pcs |
| 414963-1 | TE Connectivity AMP Connectors | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | 0.6 dB | ROHS3 Compliant | 64520 Pcs |
| 415340-1 | TE Connectivity AMP Connectors | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | 0.6 dB | ROHS3 Compliant | 2150 Pcs |
| B51-053-0000220 | ITT Cannon, LLC | SMB | Jack, Male Pin | 50 Ohms | Through Hole, Right Angle | 4 GHz | -65°C to 165°C | 500 | 0.25 dB | ROHS3 Compliant | 1404 Pcs |
Engineering Selection Recommendations
All listed substitute parts are qualified equivalents for the 2010-1511-017 based on matching electrical and mechanical specifications. Selection among substitutes should be based on the following factors:
Manufacturer Availability: Radiall USA, Inc. parts (2010-1511-000, R114665000, R114665000W) maintain design continuity with the primary part. TE Connectivity AMP Connectors parts (1-1337481-0, 414963-1, 415340-1) and Cinch Connectivity Solutions parts (131-1701-371, 131-3701-301) provide multi-source alternatives. ITT Cannon, LLC part B51-053-0000220 offers an additional independent source.
Inventory Levels: Part 414963-1 (TE Connectivity) offers the highest inventory at 64520 pieces. Parts 131-3701-301 (Cinch) and 1-1337481-0 (TE Connectivity) provide substantial availability at 5394 and 2200 pieces respectively.
Compliance Status: All substitute parts are ROHS3 Compliant and REACH Affected, matching the regulatory status of the primary part.
Performance Characteristics: Parts with specified insertion loss (0.6 dB for most TE Connectivity and Radiall parts, 0.25 dB for B51-053-0000220) demonstrate measured RF performance. Parts without specified insertion loss meet the same electrical requirements but lack published performance data.
Material Composition: Body material variations (brass, zinc, zinc alloy) and center contact material variations (brass, beryllium copper) do not affect functional compatibility in 50 Ohm RF applications at frequencies up to 4 GHz.
Frequently Asked Questions (FAQ)
Q: Can I substitute part 414963-1 for 2010-1511-017 in my PCB assembly?
A: Yes. Part 414963-1 meets all mandatory electrical and mechanical parameters: SMB connector style, jack male pin configuration, 50 Ohm impedance, through-hole right-angle mounting, solder termination, 4 GHz frequency rating, -65°C to 165°C operating temperature, 500 mating cycles, and ROHS3 compliance. The connector footprint and solder pad configuration are identical.
Q: What is the difference between the Radiall parts (2010-1511-000, R114665000, R114665000W) and the primary part 2010-1511-017?
A: All Radiall parts share the same base product number (2010-1511 or R1146650) and meet identical electrical specifications. Differences are in manufacturing variants and internal design revisions. All are functionally equivalent for 50 Ohm RF applications.
Q: Why do some substitute parts not list insertion loss specifications?
A: Insertion loss is a measured performance characteristic that manufacturers may or may not publish in standard datasheets. Absence of published insertion loss does not indicate inferior performance. All parts meet the same 50 Ohm impedance and frequency specifications required for RF signal integrity.
Q: Can I use part B51-053-0000220 (ITT Cannon) with lower insertion loss (0.25 dB) instead of the standard 0.6 dB parts?
A: Yes. Part B51-053-0000220 is a qualified substitute that meets all mandatory parameters. The lower insertion loss represents superior RF performance and is directly compatible with the primary part's electrical and mechanical interface.
Q: Are there any temperature or frequency limitations when substituting these parts?
A: No. All substitute parts operate across the identical temperature range (-65°C to 165°C) and frequency range (up to 4 GHz). There are no derating requirements or frequency-dependent limitations when substituting among the listed parts.
Q: What is the difference between TE Connectivity parts 414963-1 and 415340-1?
A: Both parts are functionally equivalent SMB right-angle jack connectors with identical electrical specifications, frequency ratings, temperature ranges, and mating cycles. The difference is in internal design or manufacturing process. Both are direct substitutes for the primary part.
Q: Can I mix different manufacturers' connectors in the same PCB design?
A: Yes. All listed substitute parts meet identical footprint, electrical, and mechanical specifications. PCB designs can accommodate any of these parts without layout modifications. However, for manufacturing consistency and supply chain management, it is typical to standardize on a single part number per design.
Q: What does ROHS3 Compliant mean for connector selection?
A: ROHS3 Compliant indicates the part meets Restriction of Hazardous Substances Directive 3 requirements, restricting lead and other hazardous materials. All listed parts and the primary part are ROHS3 Compliant, ensuring regulatory compliance for applications in regulated markets.
Q: Is the 500 mating cycle rating sufficient for my application?
A: The 500 mating cycle specification is a standard rating for SMB connectors in this class. This rating applies to all listed substitute parts and the primary part. Mating cycle requirements should be evaluated against your specific application's connector engagement frequency.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts