Equivalent & Substitute Parts for Radiall 2010-1511-002 SMB Right Angle Jack Receptacle

Part Overview

The Radiall 2010-1511-002 is an SMB connector jack with male pin configuration, designed for 50 ohm RF applications. This through-hole, right-angle solder mount connector operates across a frequency range up to 4 GHz and is rated for -65°C to 165°C operating temperatures. The part is Active status and ROHS3 compliant, making it suitable for modern electronic assemblies requiring RF signal transmission in PCB-mounted applications.

Equivalent and substitute parts are necessary when the primary part number becomes unavailable, when alternative manufacturers offer compatible specifications, or when design requirements allow for functionally interchangeable components that meet the same electrical and mechanical parameters.

Key Parameters

Parameter	Specification
Connector Style	SMB
Connector Type	Jack, Male Pin
Impedance	50 Ohms
Mounting Type	Through Hole, Right Angle
Contact Termination	Solder
Shield Termination	Solder
Frequency Maximum	4 GHz
Operating Temperature Range	-65°C to 165°C
Mating Cycles	500
Fastening Type	Snap-On
Number of Ports	1
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the Radiall 2010-1511-002 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Style: SMB
Connector Type: Jack, Male Pin
Impedance: 50 Ohms
Mounting Type: Through Hole, Right Angle
Contact Termination: Solder
Shield Termination: Solder
Frequency Maximum: 4 GHz
Operating Temperature Range: -65°C to 165°C
Mating Cycles: 500
Fastening Type: Snap-On
Number of Ports: 1
RoHS Status: ROHS3 Compliant

All substitute parts listed in this document meet these mandatory parameters. Variations in secondary characteristics such as body material composition, center contact material, body finish color, and voltage rating do not disqualify a part from substitution when all mandatory parameters align. These secondary variations reflect different manufacturer design approaches while maintaining functional equivalence in the specified application.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Connector Style	Connector Type	Impedance	Mounting Type	Frequency Max	Operating Temperature	Mating Cycles	Insertion Loss	RoHS Status	Product Status
2010-1511-002	Radiall USA, Inc.	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	0.6 dB	ROHS3 Compliant	Active
2010-1511-000	Radiall USA, Inc.	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	Not Specified	ROHS3 Compliant	Active
R114665000	Radiall USA, Inc.	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	Not Specified	ROHS3 Compliant	Active
R114665000W	Radiall USA, Inc.	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	Not Specified	ROHS3 Compliant	Active
903-373J-51A	Amphenol RF	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	0.6 dB	ROHS3 Compliant	Active
1-1337481-0	TE Connectivity AMP Connectors	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	0.6 dB	ROHS3 Compliant	Active
131-1701-371	Cinch Connectivity Solutions	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	Not Specified	ROHS3 Compliant	Active
131-3701-301	Cinch Connectivity Solutions	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	Not Specified	ROHS3 Compliant	Active
414963-1	TE Connectivity AMP Connectors	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	0.6 dB	ROHS3 Compliant	Active
415340-1	TE Connectivity AMP Connectors	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	0.6 dB	ROHS3 Compliant	Active
B51-053-0000220	ITT Cannon, LLC	SMB	Jack, Male Pin	50 Ohms	Through Hole, Right Angle	4 GHz	-65°C to 165°C	500	0.25 dB	ROHS3 Compliant	Active

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and ROHS3 compliance, confirming their suitability for current production and regulatory requirements. Selection among equivalent parts should be based on:

Manufacturer Availability: Parts from Radiall USA, Inc. (2010-1511-000, R114665000, R114665000W) represent direct manufacturer alternatives within the same product family and maintain identical core specifications.

Cross-Manufacturer Equivalents: Parts from Amphenol RF (903-373J-51A), TE Connectivity AMP Connectors (1-1337481-0, 414963-1, 415340-1), Cinch Connectivity Solutions (131-1701-371, 131-3701-301), and ITT Cannon, LLC (B51-053-0000220) provide functionally equivalent solutions with verified compliance to the same electrical and mechanical standards.

Insertion Loss Characteristics: Parts specifying 0.6 dB insertion loss (2010-1511-002, 903-373J-51A, 1-1337481-0, 414963-1, 415340-1) match the primary part's performance. Part B51-053-0000220 specifies 0.25 dB insertion loss, indicating superior RF performance. Parts with unspecified insertion loss values remain electrically compatible within the 50 ohm, 4 GHz specification envelope.

Supply Chain Considerations: Inventory levels vary across manufacturers and part numbers. Selection should account for lead time requirements and supply continuity.

Frequently Asked Questions (FAQ)

Q: Can I substitute any of these parts directly into an assembly designed for the Radiall 2010-1511-002?

A: Yes. All listed parts meet the mandatory electrical and mechanical parameters: SMB connector style, jack with male pin, 50 ohm impedance, through-hole right-angle solder mount, 4 GHz frequency rating, -65°C to 165°C operating range, 500 mating cycles, and ROHS3 compliance. Direct substitution is supported at the PCB assembly level.

Q: What is the difference between the Radiall variants (2010-1511-002, 2010-1511-000, R114665000, R114665000W)?

A: These are all Radiall USA, Inc. products sharing the same base specifications. Differences exist in internal design variants and packaging designations. All maintain identical electrical performance and mechanical compatibility for the specified application.

Q: Why do some parts list insertion loss as 0.6 dB while others do not specify this value?

A: Insertion loss specification depends on manufacturer test data availability and documentation practices. Parts without specified insertion loss values remain compliant with the 50 ohm, 4 GHz standard and are electrically equivalent. The 0.6 dB specification represents measured performance under standard test conditions.

Q: Are there material differences between substitute parts that affect performance?

A: Secondary material variations exist, including center contact material (brass versus beryllium copper), body material (brass versus zinc alloy), and body finish (gold versus tin). These variations reflect different manufacturer design approaches. All parts meet the same electrical impedance, frequency, and temperature specifications. Material selection does not affect functional compatibility in the specified application.

Q: Can I use part B51-053-0000220 as a direct replacement if it has lower insertion loss?

A: Yes. The B51-053-0000220 meets all mandatory parameters and offers 0.25 dB insertion loss compared to the primary part's 0.6 dB. Lower insertion loss represents improved RF performance and is compatible with the same PCB footprint and solder termination process.

Q: What compliance certifications apply to all substitute parts?

A: All listed parts are ROHS3 compliant and carry EAR99 ECCN classification. Parts from TE Connectivity, Amphenol RF, and Cinch Connectivity Solutions include REACH Affected status. These certifications confirm suitability for regulated markets and modern electronic assembly standards.

Q: Are there any packaging or quantity considerations when selecting a substitute?

A: All parts are supplied in Bulk packaging. Inventory availability varies by manufacturer and part number. Selection should account for required order quantities and lead time constraints specific to your supply chain requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message