TE Connectivity 2008570-5 Rectangular Connector Housing - Equivalent & Substitute Parts

Part Overview

The TE Connectivity 2008570-5 is a 5-position receptacle housing for the Micro MATE-N-LOK connector series. This component is a black polyamide (PA) nylon receptacle designed for free-hanging in-line applications with crimp contact termination and latch lock fastening. The part is Active in product status and RoHS compliant. Substitute parts are identified when inventory availability is limited, when procurement lead times require alternative sourcing, or when design flexibility permits selection from equivalent connector housings within the same series and electrical specifications.

Substiute Parts

2008570-5

TE Connectivity AMP ConnectorsIn Stock: 9992008570-5 Datasheet

Current PartRFQ

1445022-5

TE Connectivity AMP ConnectorsIn Stock: 698101445022-5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connector housings is determined by strict equivalence across the following critical parameters:

• Connector Series: Both parts must belong to the Micro MATE-N-LOK series to ensure mechanical and electrical compatibility with mating connectors and contact sets.
• Number of Positions and Pitch: The 5-position configuration at 0.118" (3.00mm) pitch defines the physical layout and contact spacing. Substitutes must match exactly.
• Connector Type and Contact Type: Receptacle housings with female socket contacts are required for the specified application.
• Mounting Type: Free hanging in-line mounting must be preserved for installation compatibility.
• Contact Termination and Fastening: Crimp termination and latch lock fastening must remain consistent.
• Operating Temperature and Environmental Compliance: The -40°C ~ 105°C operating range and RoHS compliance status must be maintained.

The substitute part 1445022-5 meets all these criteria and is therefore electrically and mechanically interchangeable with the main part 2008570-5.

Parameter Comparison

Engineering Selection Recommendations

Both the main part 2008570-5 and the substitute part 1445022-5 are Active products from TE Connectivity AMP Connectors with full RoHS compliance and identical electrical and mechanical specifications. Selection between these parts is based on availability and procurement requirements rather than functional differences.

The 2008570-5 is suitable for applications where the specific base product number is required or when inventory from this particular part number is preferred. The 1445022-5 offers significantly higher inventory availability (69,767 pieces versus 967 pieces) and serves as the primary alternative when supply chain considerations are relevant.

Both parts are rated for the same operating temperature range (-40°C ~ 105°C) and carry MSL Level 1 (Unlimited) moisture sensitivity classification, indicating no special storage or handling requirements. The insulation material difference (PA versus PA66) represents a material grade variation within the polyamide nylon family and does not affect functional compatibility or performance in the specified application.

Frequently Asked Questions (FAQ)

Q: Can 1445022-5 be used as a direct replacement for 2008570-5?

A: Yes. Both parts are 5-position receptacle housings in the Micro MATE-N-LOK series with identical pitch (0.118" / 3.00mm), mounting type, contact termination, and fastening specifications. They are electrically and mechanically interchangeable.

Q: What is the difference between the insulation materials listed for each part?

A: The main part specifies polyamide (PA) nylon, while the substitute specifies polyamide (PA66) nylon 6/6. Both are polyamide-based materials within the nylon family and provide equivalent performance for this connector housing application. The material grade difference does not affect compatibility or functional characteristics.

Q: Are both parts RoHS compliant?

A: Yes. Both 2008570-5 and 1445022-5 are RoHS compliant and carry MSL Level 1 (Unlimited) moisture sensitivity ratings, indicating no special environmental storage or handling requirements.

Q: Do these housings include contacts?

A: No. Both parts are connector housings only. Contacts are not included and must be sourced separately. Ensure that selected contacts are compatible with the 5-position, 0.118" (3.00mm) pitch Micro MATE-N-LOK series and are rated for crimp termination.

Q: What is the operating temperature range for these parts?

A: Both parts operate across the range of -40°C to 105°C, making them suitable for industrial and automotive applications within this thermal envelope.

Q: Are there any differences in packaging or availability?

A: Both parts are supplied in bulk packaging. The substitute part 1445022-5 has significantly higher inventory availability (69,767 pieces) compared to the main part 2008570-5 (967 pieces), which may influence procurement decisions based on lead time and supply chain requirements.