3M Scotchlok™ 20006 Terminal Butt Splice 2/0 AWG Equivalent & Substitute Parts

Part Overview

The 3M Scotchlok™ 20006 is an insulated terminal butt splice connector designed for inline, individual opening crimp termination of 2/0 AWG conductors. This component is classified as an active product with full RoHS and REACH compliance. Substitute parts may be required due to inventory constraints, regional availability, or specific application requirements where equivalent electrical and mechanical parameters are maintained.

Substiute Parts

20006

3MIn Stock: 234120006 Datasheet

Current PartRFQ

SA2/0-5

Panduit CorpIn Stock: 930SA2/0-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 3M Scotchlok™ 20006 is determined by the following critical parameters:

• Terminal Type: Butt Splice, Inline, Individual Openings
• Wire Gauge: 2/0 AWG
• Number of Wire Entries: 2
• Termination Method: Crimp
• Color: Olive

The Panduit Corp SA2/0-5 meets all functional requirements for direct substitution. Both parts accommodate 2/0 AWG conductors, employ crimp termination, feature individual opening configurations, and are available in olive color. The primary distinction is insulation coverage: the 3M 20006 provides insulated construction, while the Panduit SA2/0-5 is non-insulated with gel-filled and capped features for environmental protection.

Parameter Comparison

Engineering Selection Recommendations

The 3M Scotchlok™ 20006 remains the primary selection for new designs and applications requiring active product status and continuous manufacturer support. The Panduit Corp SA2/0-5 serves as a functional equivalent for existing installations or applications where non-insulated construction with gel-filled protection is acceptable. Both parts satisfy RoHS and REACH compliance requirements. Selection between these parts should account for product availability status, with the 3M 20006 recommended for ongoing procurement due to its active classification.

Frequently Asked Questions (FAQ)

Q: Can the Panduit SA2/0-5 directly replace the 3M Scotchlok™ 20006 in existing applications?

A: The Panduit SA2/0-5 is functionally equivalent for 2/0 AWG crimp butt splice applications. The primary difference is insulation coverage: the 3M part provides insulated construction while the Panduit part is non-insulated with gel-filled and capped features. Application requirements determine suitability.

Q: What is the significance of the insulation difference between these parts?

A: The 3M Scotchlok™ 20006 features insulated construction for direct conductor connection. The Panduit SA2/0-5 is non-insulated but includes gel-filled and capped design for environmental sealing. Both configurations are suitable for 2/0 AWG termination; selection depends on application environment and installation requirements.

Q: Are both parts compliant with current regulatory standards?

A: Yes. The 3M Scotchlok™ 20006 is RoHS Compliant and REACH Unaffected. The Panduit SA2/0-5 is ROHS3 Compliant and REACH Unaffected. Both meet current regulatory requirements.

Q: Why is the Panduit SA2/0-5 listed as discontinued?

A: The Panduit SA2/0-5 is discontinued at DiGi Electronics. Availability through alternative distribution channels or direct manufacturer contact may be possible. The 3M Scotchlok™ 20006 maintains active product status with standard availability.

Q: Do both parts use the same crimp termination method?

A: Yes. Both the 3M Scotchlok™ 20006 and Panduit SA2/0-5 employ crimp termination for 2/0 AWG conductors with identical wire entry configuration.