Equivalent & Substitute Parts for Honeywell 1TL11-82G Toggle Switch

Part Overview

The Honeywell 1TL11-82G is an SPDT (Single Pole Double Throw) toggle switch rated for 10A at 125V AC, designed for panel mount applications. This switch features a locking lever actuator with a 26.67mm length and operates across a temperature range of -65°C to 71°C. The product is Active status and RoHS Compliant, making it suitable for industrial control and consumer appliance applications where reliable switching functionality is required. Equivalent parts are identified when all critical electrical and mechanical parameters align with the original specification.

Substiute Parts

1TL11-82G

Honeywell Sensing and Productivity SolutionsIn Stock: 9481TL11-82G Datasheet

Current PartRFQ

1TL1-8F

Honeywell Sensing and Productivity SolutionsIn Stock: 10891TL1-8F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Honeywell 1TL11-82G toggle switch is determined by strict equivalence across the following critical parameters:

Electrical Parameters: Circuit configuration (SPDT), current rating (10A AC), and voltage rating (125V AC) must be identical. These parameters define the switch's load-carrying capability and switching function.

Mechanical Parameters: Mounting type (Panel Mount), actuator type (Locking Lever), actuator length (26.67mm), panel cutout dimensions (Circular - 12.40mm Dia), and bushing thread (15/32-32) must match exactly. These parameters ensure physical compatibility with existing panel installations and mechanical interfaces.

Environmental & Compliance Parameters: Operating temperature range (-65°C ~ 71°C), ingress protection (Environment Sealed), and RoHS Compliance status must align. These parameters confirm suitability for the intended operating environment and regulatory requirements.

The substitute part 1TL1-8F meets all these criteria and is therefore a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The Honeywell 1TL1-8F is a direct equivalent substitute for the 1TL11-82G. Both parts are manufactured by Honeywell Sensing and Productivity Solutions, carry Active product status, and maintain identical electrical, mechanical, and environmental specifications. Both parts are RoHS Compliant and classified under the same ECCN and HTSUS codes, confirming regulatory alignment.

Selection between these two part numbers can be based on inventory availability and lead time considerations. The 1TL1-8F currently has 1004 pieces in stock compared to 887 pieces for the 1TL11-82G, making it a viable alternative when supply chain optimization is a factor.

Frequently Asked Questions (FAQ)

Q: Can the 1TL1-8F be used as a direct replacement for the 1TL11-82G in existing installations?

A: Yes. The 1TL1-8F is a direct equivalent. All electrical parameters (10A at 125V AC, SPDT configuration), mechanical parameters (panel mount, 26.67mm locking lever, 12.40mm circular cutout, 15/32-32 bushing thread), and environmental specifications (-65°C to 71°C operating range, environment sealed) are identical. No circuit redesign or panel modification is required.

Q: Are there any differences in compliance or certification between these two parts?

A: No. Both parts are RoHS Compliant, carry MSL Level 1 (Unlimited), and share identical ECCN (EAR99) and HTSUS (8536.50.9065) classifications. Regulatory and compliance status is equivalent.

Q: What determines whether a toggle switch can substitute for the 1TL11-82G?

A: Substitution requires exact matching of: circuit type (SPDT), current rating (10A AC), voltage rating (125V AC), mounting configuration (panel mount), actuator specifications (locking lever, 26.67mm length), panel interface dimensions (12.40mm circular cutout, 15/32-32 thread), termination style (screw terminal), and operating temperature range (-65°C to 71°C). Deviation in any of these parameters disqualifies a part as a direct equivalent.

Q: Is the 1TL1-8F available in the same packaging as the 1TL11-82G?

A: Yes. Both parts are supplied in Bulk packaging, consistent with industrial component distribution standards.

Q: Can these switches be used interchangeably in AC and DC applications?

A: The specifications provided indicate AC voltage rating (125V AC) and AC current rating (10A AC). Use only in applications matching these AC electrical parameters.