1SMB7.0AT3G Equivalent & Substitute Parts

Part Overview

The 1SMB7.0AT3G is a transient voltage suppressor (TVS) diode manufactured by Littelfuse Inc. in the DO-214AA (SMB) package. This unidirectional Zener diode provides 7V reverse standoff voltage with 12V maximum clamping voltage at 50A peak pulse current, delivering 600W peak pulse power for general-purpose transient protection applications. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Voltage - Reverse Standoff (Typ)	7V
Voltage - Breakdown (Min)	7.78V
Voltage - Clamping (Max) @ Ipp	12V
Current - Peak Pulse (10/1000µs)	50A
Power - Peak Pulse	600W
Package / Case	DO-214AA, SMB
Operating Temperature Range	-65°C ~ 150°C (TJ)
Unidirectional Channels	1
Type	Zener
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 1SMB7.0AT3G is determined by strict equivalence across the following electrical and mechanical parameters:

Primary Equivalence Criteria:

Voltage - Reverse Standoff: 7V (±tolerance)
Voltage - Clamping (Max) @ Ipp: 12V
Current - Peak Pulse (10/1000µs): 50A minimum
Power - Peak Pulse: 600W minimum
Package / Case: DO-214AA or SMB
Unidirectional Channels: 1
Type: Zener

Substitute Categories:

Category 1: Direct Electrical Equivalents (Active Status) Parts meeting all primary equivalence criteria with identical electrical specifications and active product status.

Category 2: Manufacturer Recommended Alternatives (Active Status) Littelfuse Inc. and other manufacturers' active parts with identical electrical specifications, offered as direct replacements with enhanced or equivalent performance characteristics.

Category 3: Near-Equivalent Substitutes (Voltage Variance) Parts with minor voltage parameter variations (±0.5V standoff, ±1V clamping) that remain functionally compatible within general-purpose transient protection applications.

Category 4: Enhanced Performance Substitutes Parts exceeding minimum specifications (higher peak pulse current or power rating) that provide superior transient suppression capability while maintaining voltage compatibility.

Parameter Comparison

Part Number	Manufacturer	Standoff Voltage (Typ)	Breakdown Voltage (Min)	Clamping Voltage (Max)	Peak Pulse Current	Peak Pulse Power	Package	Status
1SMB7.0AT3G	Littelfuse Inc.	7V	7.78V	12V	50A	600W	DO-214AA, SMB	Obsolete
SMBJ7.0A	MDD	7V	7.78V	12V	50A	600W	DO-214AA, SMB	Active
SMBJ7.0A-HR	Littelfuse Inc.	7V	7.78V	12V	50A	600W	DO-214AA, SMB	Active
SMBJ7.0A-HRA	Littelfuse Inc.	7V	7.78V	12V	50A	600W	DO-214AA, SMB	Active
SMBJ7.0A-T7	Littelfuse Inc.	7V	7.78V	12V	50A	600W	DO-214AA, SMB	Active
SMB10J7.0A-E3/5B	Vishay General Semiconductor - Diodes Division	7V	7.78V	12V	83.3A	1000W	DO-214AA, SMB	Active
SMBJ6.5A	Taiwan Semiconductor Corporation	6.5V	7.22V	11.2V	56A	600W	DO-214AA, SMB	Active
SMBJ7.0A-13-F	Diodes Incorporated	7V	7.78V	12V	50A	600W	DO-214AA, SMB	Active
SMBJ7.0A-E3/52	Vishay General Semiconductor - Diodes Division	7V	7.78V	12V	50A	600W	DO-214AA, SMB	Active
SMBJ7.0A-E3/5B	Vishay General Semiconductor - Diodes Division	7V	7.78V	12V	50A	600W	DO-214AA, SMB	Active

Engineering Selection Recommendations

Primary Substitutes (Direct Equivalents)

SMBJ7.0A-HR, SMBJ7.0A-HRA, and SMBJ7.0A-T7 from Littelfuse Inc. are manufacturer-recommended direct replacements for the 1SMB7.0AT3G. These parts maintain identical electrical specifications and operating temperature range (-65°C ~ 150°C), with active product status and ROHS3 compliance. Selection among these variants depends on packaging format requirements: -HR and -HRA variants are supplied in Tape & Reel (TR) format, while -T7 is also available in TR format.

SMBJ7.0A-13-F from Diodes Incorporated and SMBJ7.0A-E3/52 and SMBJ7.0A-E3/5B from Vishay General Semiconductor - Diodes Division provide direct electrical equivalence with identical 7V standoff, 12V clamping, and 50A peak pulse specifications. All three are active products with ROHS3 compliance and Tape & Reel packaging.

SMBJ7.0A from MDD provides direct electrical equivalence with active product status and ROHS3 compliance, available in SMB/DO-214AA package format.

Enhanced Performance Substitute

SMB10J7.0A-E3/5B from Vishay General Semiconductor - Diodes Division exceeds minimum specifications with 83.3A peak pulse current and 1000W peak pulse power while maintaining 7V standoff and 12V clamping voltage. This part is suitable for applications requiring enhanced transient suppression margin.

Near-Equivalent Substitute

SMBJ6.5A from Taiwan Semiconductor Corporation operates at 6.5V standoff with 11.2V clamping voltage, representing a 0.5V reduction in standoff voltage and 0.8V reduction in clamping voltage. This part is compatible with general-purpose transient protection where the lower voltage threshold is acceptable.

All recommended substitutes maintain ROHS3 compliance, MSL 1 (Unlimited) moisture sensitivity rating, and surface mount DO-214AA (SMB) package compatibility.

Frequently Asked Questions (FAQ)

Q: Can SMBJ7.0A-HR be used as a direct replacement for 1SMB7.0AT3G?

A: Yes. SMBJ7.0A-HR from Littelfuse Inc. is a manufacturer-recommended direct replacement with identical electrical specifications: 7V standoff voltage, 12V clamping voltage, 50A peak pulse current, and 600W peak pulse power. Both parts use the DO-214AA (SMB) package and operate across -65°C to 150°C. The primary difference is product status: 1SMB7.0AT3G is obsolete while SMBJ7.0A-HR is active.

Q: What is the difference between SMBJ7.0A-HR, SMBJ7.0A-HRA, and SMBJ7.0A-T7?

A: All three parts from Littelfuse Inc. are electrically identical with 7V standoff, 12V clamping, 50A peak pulse current, and 600W peak pulse power. The designations (-HR, -HRA, -T7) indicate different product series within the SMBJ line. Selection should be based on availability and packaging format requirements, as all are supplied in Tape & Reel format.

Q: Is SMB10J7.0A-E3/5B compatible with 1SMB7.0AT3G?

A: SMB10J7.0A-E3/5B maintains voltage compatibility with 7V standoff and 12V clamping voltage, matching the 1SMB7.0AT3G. However, this part provides enhanced performance with 83.3A peak pulse current and 1000W peak pulse power compared to the original 50A and 600W specifications. It is suitable for applications where higher transient suppression capability is beneficial or required.

Q: Can SMBJ6.5A be used instead of 1SMB7.0AT3G?

A: SMBJ6.5A operates at 6.5V standoff voltage with 11.2V clamping voltage, representing a 0.5V reduction in standoff and 0.8V reduction in clamping compared to the 1SMB7.0AT3G. This part is functionally compatible for general-purpose transient protection applications where the lower voltage threshold does not compromise circuit protection requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All recommended substitute parts—SMBJ7.0A-HR, SMBJ7.0A-HRA, SMBJ7.0A-T7, SMBJ7.0A-13-F, SMBJ7.0A-E3/52, SMBJ7.0A-E3/5B, SMB10J7.0A-E3/5B, SMBJ6.5A, and SMBJ7.0A—are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What packaging formats are available for substitute parts?

A: Littelfuse Inc. variants (SMBJ7.0A-HR, SMBJ7.0A-HRA, SMBJ7.0A-T7) are supplied in Tape & Reel (TR) format. Diodes Incorporated (SMBJ7.0A-13-F) and Vishay variants (SMBJ7.0A-E3/52, SMBJ7.0A-E3/5B, SMB10J7.0A-E3/5B) are supplied in Tape & Reel format. MDD SMBJ7.0A and Taiwan Semiconductor Corporation SMBJ6.5A are available in standard SMB/DO-214AA package format. All parts use the same DO-214AA (SMB) physical package.

Q: Which substitute offers the best availability?

A: SMBJ7.0A-13-F from Diodes Incorporated shows 18,100 pieces in stock, representing the highest inventory level among direct electrical equivalents. SMBJ6.5A from Taiwan Semiconductor Corporation shows 17,957 pieces in stock. SMBJ7.0A from MDD shows 15,665 pieces in stock.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message