1N5360B-TP Equivalent & Substitute Parts

Part Overview

The 1N5360B-TP is an active zener diode manufactured by Micro Commercial Co, rated for 25 V nominal zener voltage with 5 W maximum power dissipation. This through-hole component operates across a temperature range of -55°C to 150°C and is packaged in DO-15 axial configuration. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility allow direct replacement in circuit applications without performance degradation.

Key Parameters

Parameter	Value	Unit
Voltage - Zener (Nom)	25	V
Tolerance	±5	%
Power - Max	5	W
Impedance (Max)	4	Ohms
Current - Reverse Leakage @ Vr	500 nA @ 19 V	nA
Voltage - Forward (Max) @ If	1.2 V @ 1 A	V
Operating Temperature Range	-55°C to 150°C	°C
Mounting Type	Through Hole	—
Package / Case	DO-204AC, DO-15, Axial	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of zener diodes is determined by matching the following critical electrical parameters: nominal zener voltage (Vz), maximum power rating (P-Max), voltage tolerance, impedance characteristics, and reverse leakage current specifications. Mechanical compatibility requires identical or functionally equivalent package types and through-hole mounting configuration. All substitute parts must maintain active product status and equivalent regulatory compliance (RoHS3, REACH, ECCN classifications).

The 1N5360B-TP shares the same base product number (1N5360) with identified substitutes, confirming electrical equivalence across the zener diode family. Substitution is valid when all electrical parameters match within specified tolerances and the package configuration supports direct board-level installation.

Parameter Comparison

Parameter	1N5360B-TP (Micro Commercial Co)	1N5360BRLG (onsemi)
Voltage - Zener (Nom)	25 V	25 V
Tolerance	±5%	±5%
Power - Max	5 W	5 W
Impedance (Max)	4 Ohms	4 Ohms
Current - Reverse Leakage @ Vr	500 nA @ 19 V	500 nA @ 19 V
Voltage - Forward (Max) @ If	1.2 V @ 1 A	1.2 V @ 1 A
Mounting Type	Through Hole	Through Hole
Package / Case	DO-204AC, DO-15, Axial	T-18, Axial
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected
ECCN	EAR99	EAR99
Product Status	Active	Active

Engineering Selection Recommendations

Both the 1N5360B-TP and 1N5360BRLG are active products with identical electrical specifications for zener voltage, power rating, impedance, and leakage characteristics. Both components are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99, confirming equivalent regulatory standing.

The 1N5360BRLG manufactured by onsemi extends the operating temperature range to -65°C to 200°C compared to the 1N5360B-TP range of -55°C to 150°C. This extended temperature capability of the onsemi substitute provides additional thermal margin for applications requiring operation at elevated or reduced ambient temperatures.

Package configuration differences exist between the two parts: the 1N5360B-TP uses DO-204AC/DO-15 packaging while the 1N5360BRLG uses T-18 axial packaging. Both are through-hole axial components suitable for identical PCB footprints and lead spacing. Selection between these parts depends on specific thermal requirements and available inventory.

Frequently Asked Questions (FAQ)

Q: Can the 1N5360BRLG directly replace the 1N5360B-TP in existing designs?

A: Yes. Both components share identical electrical specifications for zener voltage (25 V), power rating (5 W), impedance (4 Ohms max), and leakage current (500 nA @ 19 V). Both are through-hole axial components with compatible lead configurations and PCB footprints.

Q: What is the difference in operating temperature ranges between these parts?

A: The 1N5360B-TP operates from -55°C to 150°C. The 1N5360BRLG operates from -65°C to 200°C, providing an extended temperature envelope of 10°C lower at the minimum and 50°C higher at the maximum.

Q: Are there package compatibility concerns between DO-15 and T-18 axial packages?

A: Both packages are through-hole axial configurations with standard lead spacing compatible with identical PCB hole patterns. No mechanical incompatibility exists for board-level installation.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both the 1N5360B-TP and 1N5360BRLG are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes.

Q: What inventory availability exists for these substitute parts?

A: The 1N5360B-TP has 4748 pieces in stock. The 1N5360BRLG has 1129 pieces in stock. Availability should be confirmed with the supplier for production requirements.

Q: Are the electrical characteristics identical between these zener diodes?

A: Yes. Nominal zener voltage, tolerance, maximum power dissipation, impedance, reverse leakage current, and forward voltage specifications are identical across both parts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message