1N4763A-TR Zener Diode Equivalent & Substitute Parts

Part Overview

The 1N4763A-TR is a 91 V, 1.3 W zener diode manufactured by Vishay General Semiconductor - Diodes Division in a through-hole DO-204AL (DO-41) axial package. This component is classified as obsolete, though 1420 pieces remain in stock as new original inventory. The part is AEC-Q101 qualified for automotive applications and RoHS3 compliant.

Due to the obsolete product status, equivalent and substitute zener diodes with matching or superior electrical characteristics are available from active product lines. Substitutes maintain the 91 V nominal zener voltage and ±5% tolerance while offering alternative power ratings, package configurations, and manufacturing sources.

Key Parameters

Parameter	1N4763A-TR
Voltage - Zener (Nom)	91 V
Tolerance	±5%
Power - Max	1.3 W
Impedance (Max)	250 Ohms
Current - Reverse Leakage @ Vr	5 µA @ 69.2 V
Voltage - Forward (Vf) (Max) @ If	1.2 V @ 200 mA
Operating Temperature	175°C (TJ)
Mounting Type	Through Hole
Package / Case	DO-204AL, DO-41, Axial
Product Status	Obsolete
Grade	Automotive
Qualification	AEC-Q101

Substitute Part Grouping Explanation

Substitution of the 1N4763A-TR is determined by the following critical parameters:

Primary Matching Criteria:

Voltage - Zener (Nom): 91 V (exact match required)
Tolerance: ±5% (acceptable match)
Mounting Type: Through Hole (required for mechanical compatibility)

Secondary Compatibility Criteria:

Power - Max: 1.3 W or greater (equal or superior power handling)
Impedance (Max): 250 Ohms or lower (equal or superior impedance performance)
Operating Temperature: 175°C or higher (equal or superior thermal range)
Package / Case: DO-204AL (DO-41) or equivalent through-hole axial packages

Substitute parts are grouped into three categories based on power rating and package type:

Category 1: Lower Power Alternatives (400 mW - 500 mW) Parts 1N4134, 1N4134-1, 1N5270, and 1N5270A provide reduced power dissipation capability. These are suitable for applications with lower power requirements and offer active product status.

Category 2: Equivalent Power Alternatives (1 W - 1.25 W) Parts 1N4763 G, 1N4763AUR, 1N5948A, and 1N5948AG maintain power ratings at or near the original specification. 1N4763AUR differs in mounting type (surface mount). 1N5948A and 1N5948AG offer 1.25 W capability in through-hole packages.

Category 3: Higher Power Alternatives (1.5 W) Part 1N4488 provides superior power handling at 1.5 W, suitable for applications requiring increased thermal margin.

Parameter Comparison

Part Number	Manufacturer	Vz (Nom)	Tolerance	Power - Max	Impedance (Max)	Vf (Max) @ If	Operating Temp	Package	Product Status
1N4763A-TR	Vishay	91 V	±5%	1.3 W	250 Ω	1.2 V @ 200 mA	175°C	DO-204AL (DO-41)	Obsolete
1N4134	Microchip	91 V	±5%	400 mW	1200 Ω	1 V @ 200 mA	-65°C ~ 200°C	DO-204AA (DO-7)	Active
1N4134-1	Microchip	91 V	±5%	500 mW	1200 Ω	1.1 V @ 200 mA	-65°C ~ 175°C	DO-204AH (DO-35)	Active
1N4488	Microchip	91 V	±5%	1.5 W	200 Ω	1.5 V @ 1 A	-65°C ~ 175°C	DO-204AL (DO-41)	Active
1N4763 G	Microsemi	91 V	±10%	1 W	250 Ω	1.2 V @ 200 mA	-65°C ~ 175°C	DO-204AL (DO-41)	Active
1N4763AUR	Microchip	91 V	±5%	1 W	250 Ω	1.2 V @ 200 mA	-65°C ~ 175°C	DO-213AB (MELF)	Active
1N5270	Microchip	91 V	±5%	500 mW	400 Ω	1.5 V @ 200 mA	-65°C ~ 175°C	DO-204AH (DO-35)	Active
1N5270A	Microchip	91 V	±10%	500 mW	400 Ω	1.5 V @ 200 mA	-65°C ~ 175°C	DO-204AH (DO-35)	Active
1N5948A	Microchip	91 V	±10%	1.25 W	200 Ω	1.2 V @ 200 mA	-65°C ~ 175°C	DO-204AL (DO-41)	Active
1N5948AG	Microsemi	91 V	±10%	1.25 W	200 Ω	1.2 V @ 200 mA	-65°C ~ 175°C	DO-204AL (DO-41)	Active
1N5948B	Microchip	91 V	Not specified	Not specified	Not specified	Not specified	Not specified	DO-204AL (DO-41)	Active

Engineering Selection Recommendations

For Direct Through-Hole DO-41 Package Replacement:

1N4488 (Microchip Technology) is the primary substitute for applications requiring equivalent or superior power handling in the same package footprint. This part maintains the DO-204AL (DO-41) axial package, provides 1.5 W power rating (exceeding the original 1.3 W specification), and holds active product status. The impedance of 200 Ohms is superior to the original 250 Ohms specification.

1N5948A and 1N5948AG are secondary alternatives offering 1.25 W power rating in the DO-204AL (DO-41) package. Both parts maintain active product status and provide improved impedance characteristics at 200 Ohms. These parts carry ±10% tolerance versus the original ±5% specification.

1N4763 G (Microsemi Corporation) provides a direct functional equivalent with 1 W power rating in the DO-204AL (DO-41) package. This part maintains the 250 Ohms impedance specification and active product status, though tolerance is ±10%.

For Reduced Power Applications:

1N4134 (Microchip Technology) in DO-204AA (DO-7) package and 1N4134-1 (Microchip Technology) in DO-204AH (DO-35) package are suitable for applications with lower power dissipation requirements (400 mW and 500 mW respectively). These parts maintain ±5% tolerance and active product status but require different through-hole package footprints.

For Surface Mount Applications:

1N4763AUR (Microchip Technology) provides an equivalent electrical specification in a surface mount DO-213AB (MELF) package. This part maintains 91 V nominal voltage, ±5% tolerance, 1 W power rating, and 250 Ohms impedance. Selection of this part requires PCB redesign for surface mount compatibility.

Compliance Considerations:

The original 1N4763A-TR carries AEC-Q101 automotive qualification. Substitute parts from active product lines do not explicitly list automotive qualification in the provided specifications. Applications requiring automotive-grade components should verify qualification status with manufacturers before final selection.

Frequently Asked Questions (FAQ)

Q: Can I use 1N4134 as a direct replacement for 1N4763A-TR?

A: 1N4134 maintains the 91 V nominal zener voltage and ±5% tolerance but differs in two critical aspects: power rating (400 mW versus 1.3 W) and package type (DO-204AA/DO-7 versus DO-204AL/DO-41). Use 1N4134 only in applications with power dissipation below 400 mW and where the smaller DO-7 package footprint is acceptable.

Q: What is the difference between 1N4763 G and 1N4763AUR?

A: Both parts share the same base part number (1N4763) and maintain 91 V nominal voltage with 250 Ohms impedance. The primary difference is mounting type: 1N4763 G is through-hole axial (DO-204AL/DO-41), while 1N4763AUR is surface mount (DO-213AB/MELF). Package selection depends on PCB design requirements. 1N4763 G carries ±10% tolerance; 1N4763AUR carries ±5% tolerance.

Q: Why does 1N4488 have lower impedance (200 Ohms) than the original part (250 Ohms)?

A: Lower impedance indicates superior dynamic performance and lower output impedance under load changes. This is an improvement over the original specification. 1N4488 provides this benefit while maintaining the same 91 V nominal voltage and offering higher power rating (1.5 W).

Q: Can I substitute 1N5948A for 1N4763A-TR in an automotive application?

A: 1N5948A maintains the 91 V nominal voltage, DO-204AL (DO-41) package, and provides 1.25 W power rating. However, the original part carries AEC-Q101 automotive qualification while 1N5948A does not explicitly list this qualification in available specifications. Verify automotive qualification requirements with the component manufacturer before use in automotive applications.

Q: What is the difference between 1N5270 and 1N5270A?

A: Both parts maintain 91 V nominal voltage, 500 mW power rating, and DO-204AH (DO-35) package. The primary difference is tolerance: 1N5270 carries ±5% tolerance while 1N5270A carries ±10% tolerance. Select 1N5270 for applications requiring tighter voltage tolerance specifications.

Q: Why do some substitute parts have higher operating temperature ranges?

A: Parts such as 1N4134 specify -65°C to 200°C operating range, exceeding the original part's 175°C maximum. Extended temperature range indicates broader environmental capability and is not a limitation for applications operating within the original specification range.

Q: Is 1N5948B a suitable substitute?

A: 1N5948B maintains the DO-204AL (DO-41) package and active product status. However, critical electrical parameters including voltage tolerance, power rating, impedance, and forward voltage are not specified in available data. Obtain complete electrical specifications from the manufacturer before selecting this part for critical applications.

Q: Can I use multiple lower-power zener diodes in parallel to replace the 1N4763A-TR?

A: Parallel connection of zener diodes is not addressed in the provided substitute specifications. Consult application-specific design guidance and manufacturer recommendations for parallel diode configurations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message