1N4741A-T Zener Diode Equivalent & Substitute Parts

Part Overview

The 1N4741A-T is an 11 V, 1 W Zener diode manufactured by Diodes Incorporated in DO-41 through-hole package configuration. This component is classified as obsolete, indicating discontinuation by the original manufacturer. Substitute parts are necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications requiring 11 V Zener regulation in through-hole form factor.

Key Parameters

Parameter	Value	Unit
Voltage - Zener (Nominal)	11	V
Tolerance	±5	%
Power - Maximum	1	W
Impedance (Maximum)	8	Ohms
Current - Reverse Leakage @ Vr	5	µA @ 8.4 V
Voltage - Forward (Maximum) @ If	1.2	V @ 200 mA
Operating Temperature Range	-65 to 175	°C
Mounting Type	Through Hole
Package / Case	DO-204AL, DO-41, Axial

Substitute Part Grouping Explanation

Substitution of the 1N4741A-T is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

Voltage - Zener (Nominal): 11 V
Tolerance: ±5%
Power - Maximum: 1 W (or higher)
Impedance (Maximum): 8 Ohms
Current - Reverse Leakage @ Vr: 5 µA @ 8.4 V
Voltage - Forward (Maximum) @ If: 1.2 V @ 200 mA
Mounting Type: Through Hole
Package / Case: DO-204AL, DO-41, or Axial equivalent

Substitute parts are grouped into three categories based on product status and manufacturer availability:

Parametric Equivalent: Identical electrical specifications and package designation from the same manufacturer base product line.

Direct Manufacturer Equivalents: Active production parts from alternative manufacturers meeting all electrical and mechanical parameters.

Upgrade/Recommended Alternatives: Parts with enhanced specifications (extended temperature range, higher power rating, or automotive qualification) that maintain backward compatibility while offering improved performance margins.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vz (V)	Tolerance (%)	Power Max (W)	Zzt (Ohms)	Temp Range (°C)	Product Status	RoHS Status
1N4741A-T	Diodes Incorporated	11	±5	1	8	-65 to 175	Obsolete	ROHS3 Compliant
1N4741A	Lumimax Optoelectronic Technology	11	±5	1	8	-65 to 200	Active	RoHS Compliant
1N4741A,113	Nexperia USA Inc.	11	±5	1	8	-65 to 200	Active	ROHS3 Compliant
1N4741AP/TR8	Microchip Technology	11	±5	1	8	-65 to 150	Active	RoHS non-compliant
1N4741A,133	NXP Semiconductors	11	±5	1	8	-65 to 200	Active	Not specified
1N4741A-T50A	onsemi	11	±5	1	8	-65 to 200	Active	ROHS3 Compliant
1N4741ATR	Fairchild Semiconductor	11	±5	1	8	-65 to 200	Active	Not specified
1N4741A-TR	Vishay General Semiconductor - Diodes Division	11	±5	1.3	8	-65 to 175	Active	ROHS3 Compliant
1N4741AGE3	Microchip Technology	11	±5	1	8	-65 to 175	Active	Not specified
1N4741AP/TR12	Microchip Technology	11	±5	1	8	-65 to 150	Active	RoHS non-compliant

Engineering Selection Recommendations

For Direct Replacement (Obsolete Part Substitution):

Select from active production parts maintaining identical electrical parameters and through-hole DO-41 package configuration. The following parts provide direct functional equivalence:

1N4741A,113 (Nexperia USA Inc.): Active status, ROHS3 compliant, extended temperature range to 200°C, tape and reel packaging available.
1N4741A-T50A (onsemi): Active status, ROHS3 compliant, extended temperature range to 200°C, cut tape packaging.
1N4741ATR (Fairchild Semiconductor): Active status, extended temperature range to 200°C, bulk packaging available.

For Enhanced Performance Applications:

1N4741A-TR (Vishay General Semiconductor - Diodes Division): Offers 1.3 W power rating (30% margin above original 1 W specification), automotive grade qualification (AEC-Q101), ROHS3 compliant. Suitable for designs requiring improved thermal headroom or automotive-grade reliability.

For RoHS Compliance Verification:

Parts designated ROHS3 compliant (1N4741A-T, 1N4741A,113, 1N4741A-T50A, 1N4741A-TR) meet RoHS Directive 2011/65/EU requirements. Parts from Microchip Technology (1N4741AP/TR8, 1N4741AP/TR12) are marked RoHS non-compliant and require compliance assessment before selection.

For Temperature-Constrained Applications:

Applications operating above 150°C require selection from parts with extended temperature range: 1N4741A (Lumimax), 1N4741A,113 (Nexperia), 1N4741A-T50A (onsemi), or 1N4741ATR (Fairchild), all rated to 200°C.

Frequently Asked Questions (FAQ)

Q: Can I substitute the obsolete 1N4741A-T with any 11 V Zener diode?

A: No. Substitution requires matching all critical electrical parameters: 11 V nominal Zener voltage, ±5% tolerance, 1 W maximum power dissipation, 8 Ohms maximum impedance, 5 µA reverse leakage current at 8.4 V, and 1.2 V maximum forward voltage at 200 mA. Additionally, the through-hole DO-41 package configuration must be maintained for mechanical compatibility.

Q: What is the difference between DO-41 and DO-204AL package designations?

A: DO-41 and DO-204AL are equivalent designations for the same through-hole axial package. Both refer to a two-lead axial component with identical mechanical dimensions and pin spacing. Parts listed with either designation are mechanically interchangeable.

Q: Are Microchip 1N4741AP/TR8 and 1N4741AP/TR12 suitable replacements?

A: These parts meet all electrical parameters but are marked RoHS non-compliant. Selection depends on application compliance requirements. If RoHS compliance is mandatory, alternative sources (Nexperia, onsemi, Fairchild, Vishay) provide compliant equivalents. Both Microchip variants also have reduced maximum operating temperature (150°C versus 175°C or 200°C for alternatives).

Q: Why does the Vishay 1N4741A-TR have a 1.3 W power rating instead of 1 W?

A: The 1N4741A-TR is an upgrade variant offering enhanced power dissipation capability. The 1.3 W rating provides a 30% thermal margin above the original 1 W specification while maintaining identical Zener voltage and tolerance. This part is backward compatible and suitable for designs requiring improved thermal performance or automotive-grade reliability (AEC-Q101 qualified).

Q: What packaging options are available for active 1N4741A equivalents?

A: Active equivalents are available in multiple packaging formats: Tape & Reel (TR) for automated assembly, Cut Tape (CT) for semi-automated processes, and Bulk for manual assembly. Selection depends on production volume and assembly equipment compatibility. All maintain identical through-hole DO-41 component form factor.

Q: Is the Lumimax 1N4741A suitable for industrial temperature range applications?

A: Yes. The Lumimax 1N4741A is rated for -65°C to 200°C operating temperature, exceeding the original 1N4741A-T specification (-65°C to 175°C). This extended range supports industrial and extended-temperature applications. However, verify that other circuit components also support the full temperature range before system-level deployment.

Q: Can I use the Vishay 1N4741A-TR in place of the original 1N4741A-T without circuit modification?

A: Yes. The Vishay part maintains identical Zener voltage (11 V), tolerance (±5%), impedance (8 Ohms), and forward voltage characteristics. The increased power rating (1.3 W versus 1 W) and automotive qualification are backward compatible enhancements. No circuit modifications are required for direct substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message