Equivalent & Substitute Parts for 1KSMB47 TVS Diode

Part Overview

The 1KSMB47 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Littelfuse Inc., designed for general-purpose overvoltage protection in surface-mount applications. This component operates with a reverse standoff voltage of 40.2V and provides clamping at 68.04V with a peak pulse current rating of 15.4A. The part is currently classified as obsolete, necessitating identification of functionally equivalent alternatives that maintain electrical and mechanical compatibility for new designs or production continuity.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	40.2	V
Voltage - Breakdown (Min)	42.35	V
Voltage - Clamping (Max) @ Ipp	68.04	V
Current - Peak Pulse (10/1000µs)	15.4	A
Power - Peak Pulse	1000	W
Operating Temperature Range	-55 to 150	°C
Package / Case	DO-214AA, SMB	—
Mounting Type	Surface Mount	—
Type	Zener	—
Unidirectional Channels	1	—

Substitute Part Grouping Explanation

Substitution of the 1KSMB47 is determined by strict equivalence in the following electrical parameters: reverse standoff voltage (40.2V), unidirectional channel configuration (1 channel), package type (DO-214AA/SMB surface mount), and zener diode classification. The substitute parts identified maintain the same reverse standoff voltage and package footprint, ensuring mechanical and electrical compatibility.

The substitute parts are grouped into two categories based on peak pulse current and clamping voltage characteristics:

Category A (Full Electrical Equivalence): 1KSMB47A maintains the original 15.4A peak pulse current rating and 1000W power dissipation, with a clamping voltage of 64.8V. This part provides direct functional replacement with active product status.

Category B (Reduced Current Rating): P6SMB47A and SMBJP6KE47A-TP operate at 9.4A peak pulse current with 600W power dissipation and 64.8V clamping voltage. These parts are suitable for applications where the full 15.4A current capacity is not required.

Parameter Comparison

Parameter	1KSMB47 (Original)	1KSMB47A	P6SMB47A	SMBJP6KE47A-TP
Manufacturer	Littelfuse Inc.	Taiwan Semiconductor Corporation	Eaton - Electronics Division	Micro Commercial Co
Product Status	Obsolete	Active	Active	Active
Voltage - Reverse Standoff (Typ)	40.2V	40.2V	40.2V	40.2V
Voltage - Breakdown (Min)	42.35V	44.7V	44.7V	44.7V
Voltage - Clamping (Max) @ Ipp	68.04V	64.8V	64.8V	64.8V
Current - Peak Pulse (10/1000µs)	15.4A	15.4A	9.4A	9.4A
Power - Peak Pulse	1000W	1000W	600W	600W
Operating Temperature Range	-55 to 150°C	-55 to 175°C	-55 to 150°C	-55 to 175°C
Package / Case	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Substitute: 1KSMB47A

The 1KSMB47A from Taiwan Semiconductor Corporation is the recommended direct replacement for the obsolete 1KSMB47. This part maintains identical peak pulse current (15.4A) and power dissipation (1000W) ratings, ensuring equivalent performance in high-transient applications. The part carries active product status with ROHS3 compliance and an extended operating temperature range to 175°C, providing improved thermal margin over the original design.

Secondary Substitutes: P6SMB47A and SMBJP6KE47A-TP

The P6SMB47A (Eaton) and SMBJP6KE47A-TP (Micro Commercial Co) are suitable alternatives for applications where peak pulse current requirements do not exceed 9.4A. Both parts maintain the 40.2V reverse standoff voltage and DO-214AA/SMB package compatibility. The SMBJP6KE47A-TP offers an extended operating temperature range to 175°C, matching the thermal capability of the 1KSMB47A. Selection between these two should be based on supply chain availability and specific application current demands.

Frequently Asked Questions (FAQ)

Q: Can the 1KSMB47A directly replace the 1KSMB47 in existing designs?

A: Yes. The 1KSMB47A maintains identical reverse standoff voltage (40.2V), peak pulse current (15.4A), power dissipation (1000W), and package configuration (DO-214AA/SMB). The part is pin-compatible and electrically equivalent for all general-purpose transient suppression applications.

Q: What is the difference between the 1KSMB47A and the P6SMB47A?

A: The primary difference is peak pulse current rating. The 1KSMB47A is rated for 15.4A with 1000W power dissipation, while the P6SMB47A is rated for 9.4A with 600W power dissipation. Both maintain the same 40.2V reverse standoff voltage and 64.8V clamping voltage. Selection depends on whether the application requires the higher current capacity.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts listed (1KSMB47A, P6SMB47A, and SMBJP6KE47A-TP) are RoHS compliant. The 1KSMB47A and SMBJP6KE47A-TP carry ROHS3 certification, while the P6SMB47A carries standard RoHS certification.

Q: What is the operating temperature difference between substitutes?

A: The original 1KSMB47 operates from -55°C to 150°C. The 1KSMB47A and SMBJP6KE47A-TP extend the upper limit to 175°C, providing 25°C additional thermal margin. The P6SMB47A maintains the original -55°C to 150°C range.

Q: Can I use a lower current-rated part (9.4A) in place of the original 15.4A part?

A: Only if your application's transient current does not exceed 9.4A. The P6SMB47A and SMBJP6KE47A-TP are suitable for lower-current protection circuits. For applications requiring the full 15.4A capacity, use the 1KSMB47A.

Q: Are the substitute parts available in the same packaging options?

A: All substitute parts are available in Tape & Reel (TR) packaging. The original 1KSMB47 packaging information was not specified in the source data. All parts use the DO-214AA/SMB surface-mount package footprint.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message