Honeywell 1HM11 Snap Action Switch SPDT Equivalent & Substitute Parts

Part Overview

The Honeywell 1HM11 is an SPDT (Single Pole Double Throw) snap action switch with chassis mount configuration and solder lug termination. This switch is rated for 2A AC at 115V and 5A DC at 28V, featuring a straight lever actuator with on-momentary function. The part is currently active in production with 944 units in stock. Equivalent and substitute parts are identified based on matching circuit topology, mounting configuration, termination style, and compatible electrical ratings within acceptable operational parameters.

Substiute Parts

1HM11

Honeywell Sensing and Productivity SolutionsIn Stock: 9831HM11 Datasheet

Current PartRFQ

DB1C-A1LB

ZF ElectronicsIn Stock: 22554DB1C-A1LB Datasheet

SimilarRFQ

DC2C-A1LB

ZF ElectronicsIn Stock: 1055DC2C-A1LB Datasheet

SimilarRFQ

DC3C-A1LB

ZF ElectronicsIn Stock: 14413DC3C-A1LB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1HM11 are qualified based on the following criteria:

Primary Matching Parameters:

• Circuit configuration: SPDT topology required
• Switch function: On-momentary operation
• Actuator type: Lever, straight configuration
• Mounting type: Chassis mount
• Termination style: Solder lug

Electrical Compatibility Parameters: Substitutes must operate within the voltage and current envelope of the original application. The 1HM11 operates at 2A AC/115V and 5A DC/28V. Substitute parts with equal or higher current ratings at equal or higher voltage ratings are considered compatible for the same application circuit.

Mechanical Compatibility Parameters: Operating force, pretravel, differential travel, and overtravel characteristics determine mechanical interchangeability. Substitutes with similar actuation characteristics ensure consistent user interface and system response.

Compliance and Availability: Product status (active), inventory levels, and RoHS compliance status are documented for procurement planning.

Parameter Comparison

Engineering Selection Recommendations

DB1C-A1LB (ZF Electronics) - Primary Substitute for AC Applications

The DB1C-A1LB is suitable for applications where the 1HM11 operates at 2A AC/115V. The DB1C-A1LB provides 5A AC at 125V, exceeding the original current and voltage requirements. This part is ROHS3 compliant and maintains active production status. Inventory availability is high (22,513 units). The operating temperature range (-40°C to 120°C) is narrower than the 1HM11 but covers standard industrial operating conditions. Mechanical characteristics differ: the DB1C-A1LB has lower operating force (60gf vs. 198gf) and greater operating position (10.7mm vs. 8.4mm), which may affect system response characteristics in applications sensitive to actuation force.

DC2C-A1LB (ZF Electronics) - High Current AC Applications

The DC2C-A1LB is qualified for applications requiring higher AC current capacity. Rated at 10A AC/125V, this part exceeds the 1HM11 specifications and is suitable for circuits where current demand may increase. ROHS3 compliance and active production status are confirmed. Operating force (153gf) is closer to the 1HM11 specification than the DB1C-A1LB. Ingress protection rating IP67 (dust tight, waterproof) provides enhanced environmental protection compared to the 1HM11. Inventory is limited (989 units).

DC3C-A1LB (ZF Electronics) - Low Current AC Applications

The DC3C-A1LB is qualified for applications where AC current requirements are below 2A. Rated at 100mA AC/125V, this part is suitable for signal-level switching circuits. ROHS3 compliance and active production status are confirmed. Operating force (82gf) is lower than the 1HM11, indicating lighter actuation. Ingress protection rating IP67 provides environmental protection. Electrical life rating (100,000 cycles) is documented. Inventory availability is high (14,397 units).

Compliance Considerations

All ZF Electronics substitutes are ROHS3 compliant, whereas the 1HM11 is RoHS non-compliant. This distinction is significant for applications subject to RoHS regulations. All parts maintain EAR99 export classification and are classified under HTSUS code 8536.50 (electrical switches and relays).

Frequently Asked Questions (FAQ)

Q: Can the DB1C-A1LB replace the 1HM11 in all applications?

A: The DB1C-A1LB is electrically compatible for AC applications operating at 2A/115V or lower. However, mechanical differences exist: the DB1C-A1LB has lower operating force (60gf vs. 198gf) and greater operating position (10.7mm vs. 8.4mm). Applications sensitive to actuation force or travel distance require evaluation. DC applications operating at 5A/28V cannot use the DB1C-A1LB, which is rated 1A/48V DC.

Q: Which substitute is best for DC circuit applications?

A: The 1HM11 is rated 5A DC at 28V. The DB1C-A1LB provides 1A DC at 48V, which is insufficient for 5A DC applications. The DC2C-A1LB and DC3C-A1LB do not specify DC ratings. For DC applications requiring 5A at 28V, the 1HM11 remains the specified part. Alternative DC-rated snap action switches from other manufacturers may be required.

Q: What is the impact of different operating force specifications?

A: Operating force determines the physical effort required to actuate the switch. The 1HM11 requires 198gf, while substitutes range from 60gf (DB1C-A1LB) to 153gf (DC2C-A1LB). Lower operating force reduces actuation effort but may increase susceptibility to unintended actuation in high-vibration environments. Higher operating force provides greater immunity to vibration but requires greater user effort. Application environment and user interface requirements determine acceptable operating force ranges.

Q: Are all substitutes RoHS compliant?

A: The 1HM11 is RoHS non-compliant. All three ZF Electronics substitutes (DB1C-A1LB, DC2C-A1LB, DC3C-A1LB) are ROHS3 compliant. For applications subject to RoHS regulations, the ZF Electronics parts are required. For legacy systems without RoHS requirements, the 1HM11 remains available.

Q: What are the packaging and inventory considerations?

A: The 1HM11 is available in bulk packaging with 944 units in stock. DB1C-A1LB offers the highest inventory (22,513 units) in bulk packaging. DC2C-A1LB has limited inventory (989 units) with unspecified packaging. DC3C-A1LB provides 14,397 units in bulk packaging. For high-volume procurement, DB1C-A1LB and DC3C-A1LB offer superior availability.

Q: How do operating temperature ranges affect substitution?

A: The 1HM11 operates from -184°C to 121°C, providing the widest temperature range. All ZF Electronics substitutes operate from -40°C to 120°C. For applications requiring operation below -40°C or above 120°C, the 1HM11 is required. For standard industrial temperature ranges (-40°C to 120°C), all substitutes are compatible.

Q: What is the significance of ingress protection ratings?

A: The 1HM11 does not specify an ingress protection rating. DB1C-A1LB provides IP50 (dust protected). DC2C-A1LB and DC3C-A1LB provide IP67 (dust tight, waterproof). For applications in wet or dusty environments, the IP67-rated parts (DC2C-A1LB, DC3C-A1LB) provide enhanced protection. For dry indoor applications, ingress protection rating is not a limiting factor.