1EEB2 Power Entry Connector Receptacle IEC 320-C14 Equivalent & Substitute Parts

Part Overview

The 1EEB2 is a Power Entry Connector Receptacle manufactured by TE Connectivity Corcom Filters, designed for IEC 320-C14 panel mount applications. This component functions as a filtered AC power inlet with male blades, rated for 1A at 120/250VAC, and incorporates commercial-grade EMI/RFI filtering. The 1EEB2 is classified as obsolete, necessitating identification of equivalent substitute parts for ongoing design requirements and component procurement. Substitute parts must maintain electrical compatibility, mechanical fit, and filtering characteristics to ensure proper system operation.

Substiute Parts

1EEB2

TE Connectivity Corcom FiltersIn Stock: 10661EEB2 Datasheet

Current PartRFQ

1EEJ2

TE Connectivity Corcom FiltersIn Stock: 13261EEJ2 Datasheet

MFR RecommendedRFQ

FN9226-1-06

Schaffner EMC Inc.In Stock: 2025FN9226-1-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1EEB2 are identified based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

Electrical Compatibility Parameters:

• Connector style: IEC 320-C14
• Connector type: Receptacle, Male Blades
• Current rating: 1A minimum
• Voltage rating: 120/250VAC
• Number of positions: 3
• Filter type: Filtered (EMI, RFI) - Commercial grade
• Termination type: Quick Connect - 0.250" (6.3mm)

Mechanical Compatibility Parameters:

• Mounting type: Panel Mount, Flange, Right Angle
• Panel cutout dimensions: Rectangular configuration compatible with 30.48mm x 22.86mm or equivalent
• Approval agencies: CSA, UL, VDE certifications

Regulatory Compliance Parameters:

• RoHS3 Compliance
• ECCN: EAR99

The 1EEJ2 and FN9226-1-06 satisfy these core parameters and are classified as substitute parts. The 1EEJ2 is designated as the manufacturer-recommended substitute, while the FN9226-1-06 is identified as a similar alternative from a different manufacturer.

Parameter Comparison

Engineering Selection Recommendations

1EEJ2 - Manufacturer-Recommended Substitute

The 1EEJ2 is the primary substitute for the obsolete 1EEB2. Both parts are manufactured by TE Connectivity Corcom Filters and share identical electrical specifications: IEC 320-C14 connector style, 1A current rating, 120/250VAC voltage rating, and commercial-grade EMI/RFI filtering. The 1EEJ2 maintains the same panel cutout dimensions (30.48mm x 22.86mm) and quick connect termination. The primary difference is the addition of through-hole mounting capability in the 1EEJ2, which provides enhanced mechanical stability. The 1EEJ2 holds active product status and is ROHS3 compliant with CSA, UL, and VDE approvals. This part is suitable for direct replacement in applications requiring identical form factor and electrical performance.

FN9226-1-06 - Similar Alternative

The FN9226-1-06 manufactured by Schaffner EMC Inc. provides an alternative substitute option. This part maintains the IEC 320-C14 connector style, 3-position configuration, 1A filter current rating, and commercial-grade EMI/RFI filtering. The FN9226-1-06 is ROHS3 compliant and holds active product status. Approval agencies include CSA, ENEC, SEMKO, and UL. The panel cutout dimensions differ slightly (34.40mm x 22.60mm compared to 30.48mm x 22.86mm), requiring panel modification for installation. The FN9226-1-06 includes IP40 ingress protection and UL94 V-2 material flammability rating. This part is suitable for applications where panel cutout modification is acceptable and where Schaffner EMC filtering characteristics are compatible with system requirements.

Frequently Asked Questions (FAQ)

Q: Can the 1EEJ2 be used as a direct replacement for the 1EEB2?

A: The 1EEJ2 is electrically and mechanically compatible with the 1EEB2. Both parts share identical IEC 320-C14 connector specifications, 1A current rating, 120/250VAC voltage rating, panel cutout dimensions, and quick connect termination. The 1EEJ2 includes additional through-hole mounting capability. Installation in existing panel cutouts designed for the 1EEB2 is compatible.

Q: What are the key differences between the 1EEJ2 and FN9226-1-06?

A: The 1EEJ2 and FN9226-1-06 differ in manufacturer, panel cutout dimensions, and ingress protection rating. The 1EEJ2 maintains the original 30.48mm x 22.86mm panel cutout, while the FN9226-1-06 requires a 34.40mm x 22.60mm cutout. The FN9226-1-06 includes IP40 ingress protection. Both parts maintain identical electrical specifications and filtering characteristics.

Q: Does the FN9226-1-06 require panel modification for installation?

A: The FN9226-1-06 panel cutout dimensions (34.40mm x 22.60mm) differ from the 1EEB2 specification (30.48mm x 22.86mm). Panel modification is required for installation in existing cutouts designed for the 1EEB2.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. The 1EEJ2 and FN9226-1-06 are both ROHS3 compliant, matching the compliance status of the 1EEB2.

Q: What approval agencies certify the substitute parts?

A: The 1EEJ2 holds CSA, UL, and VDE approvals. The FN9226-1-06 holds CSA, ENEC, SEMKO, and UL approvals. Both parts meet the regulatory requirements of the original 1EEB2.

Q: Can the 1EEB2 be used in new designs?

A: The 1EEB2 is classified as obsolete. New designs should utilize the 1EEJ2 or FN9226-1-06 to ensure long-term component availability and supply chain continuity.

Q: What is the difference in termination between the substitute parts?

A: Both the 1EEJ2 and FN9226-1-06 utilize Quick Connect - 0.250" (6.3mm) termination, identical to the 1EEB2. No termination modifications are required for substitution.