Equivalent & Substitute Parts for TE Connectivity Corcom Filters 1EAS1

Part Overview

The TE Connectivity Corcom Filters 1EAS1 is a Power Entry Connector Receptacle with Male Blades, IEC 320-C14 configuration, designed for panel mount snap-in installation. This component provides filtered AC power inlet functionality with EMI and RFI commercial-grade filtering at 1A current rating across 120/250VAC supply voltages. The 1EAS1 is classified as obsolete, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility for continued system integration and procurement.

Substiute Parts

1EAS1

TE Connectivity Corcom FiltersIn Stock: 11941EAS1 Datasheet

Current PartRFQ

6609006-4

TE Connectivity Corcom FiltersIn Stock: 7516609006-4 Datasheet

MFR RecommendedRFQ

B84771A3001A000

EPCOS - TDK ElectronicsIn Stock: 901B84771A3001A000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 1EAS1 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Requirements:

• Connector style must be IEC 320-C14
• Connector type must be Receptacle with Male Blades
• Current rating at appliance inlet must be 1A
• Voltage rating must support 120/250VAC operation
• Number of positions must be 3
• Filter type must be Filtered (EMI, RFI) - Commercial grade
• Filter current rating must be 1A

Mechanical Compatibility Requirements:

• Mounting type must be Panel Mount, Snap-In
• Termination must be Quick Connect - 0.250" (6.3mm)
• Panel thickness accommodation must be 0.031" ~ 0.068" (0.79mm ~ 1.73mm)

Regulatory Compliance Requirements:

• RoHS3 compliance mandatory
• Approval agencies must include UL certification

Two substitute parts meet these criteria: TE Connectivity Corcom Filters 6609006-4 (active product status) and EPCOS - TDK Electronics B84771A3001A000 (active product status).

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TE Connectivity Corcom Filters 6609006-4

The 6609006-4 is the manufacturer-recommended substitute for the obsolete 1EAS1. This part maintains complete electrical and mechanical equivalence across all critical parameters. Both components are manufactured by TE Connectivity Corcom Filters, ensuring design continuity and manufacturing consistency. The 6609006-4 holds active product status with 699 units in current inventory, providing supply chain reliability. All regulatory certifications (CSA, UL, VDE) and RoHS3 compliance are maintained. Panel cutout dimensions are specified as Rectangular - 30.48mm x 22.86mm, providing defined mechanical integration parameters.

Secondary Substitute: EPCOS - TDK Electronics B84771A3001A000

The B84771A3001A000 provides functional equivalence as an alternative source component. This part maintains the required IEC 320-C14 connector configuration, 1A current rating, and commercial-grade EMI/RFI filtering. The voltage rating specification of 250VAC/DC encompasses the 120/250VAC requirement of the 1EAS1. The B84771A3001A000 includes additional features (Bleed Resistor, Front or Rear Side Mount) and enhanced ingress protection (IP40). UL certification is present; however, VDE certification is not listed. The part holds active product status with 829 units in inventory. Panel thickness accommodation is not specified for this component.

Frequently Asked Questions (FAQ)

Q: Can the 6609006-4 be used as a direct replacement for the 1EAS1 in existing designs?

A: Yes. The 6609006-4 maintains electrical equivalence (1A at 120/250VAC), mechanical compatibility (Panel Mount, Snap-In with 0.250" Quick Connect termination), and regulatory compliance (CSA, UL, VDE certifications). The specified panel cutout dimensions (Rectangular - 30.48mm x 22.86mm) must be verified against the original design panel specifications.

Q: What is the difference between the 6609006-4 and B84771A3001A000 substitutes?

A: Both parts meet the core electrical and mechanical requirements. The 6609006-4 is the manufacturer-recommended substitute from TE Connectivity with identical design heritage. The B84771A3001A000 is an alternative source from EPCOS - TDK Electronics with additional features (Bleed Resistor, IP40 ingress protection) and different certification profile (cUL, ENEC, UL versus CSA, UL, VDE). Panel thickness accommodation is specified for the 1EAS1 and 6609006-4 but not for the B84771A3001A000.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. Both the 6609006-4 and B84771A3001A000 are ROHS3 Compliant, matching the compliance status of the original 1EAS1.

Q: What panel thickness range must be accommodated?

A: The 1EAS1 and 6609006-4 accommodate panel thickness of 0.031" ~ 0.068" (0.79mm ~ 1.73mm). The B84771A3001A000 does not specify panel thickness accommodation in the provided data.

Q: Is the 1A current rating maintained across all substitute parts?

A: Yes. The current rating at the appliance inlet is 1A for the 1EAS1, 6609006-4, and B84771A3001A000. The filter current rating is also 1A across all three components.

Q: What are the termination specifications for these connectors?

A: All three components use Quick Connect termination with 0.250" (6.3mm) blade width, ensuring compatibility with standard quick-connect receptacles and wiring harnesses designed for this specification.

Q: Does the B84771A3001A000 include any additional protective features?

A: Yes. The B84771A3001A000 includes a Bleed Resistor and offers IP40 ingress protection. These features are not specified for the 1EAS1 or 6609006-4. The Bleed Resistor provides discharge path functionality; IP40 protection indicates resistance to solid objects greater than 1mm and water spray from any direction.