Equivalent & Substitute Parts for Keystone Electronics 1995-2

Part Overview

The Keystone Electronics 1995-2 is a PC pin terminal connector designed for through-hole mounting applications. This non-insulated brass terminal features a 0.018" (0.46mm) circular pin diameter with tin contact finish, optimized for press-fit square termination on 0.062" (1.57mm) board thickness. The component is actively produced and maintains ROHS3 compliance with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

1995-2

Keystone ElectronicsIn Stock: 7331995-2 Datasheet

Current PartRFQ

5435-1-05-01-00-00-03-0

Mill-Max Manufacturing Corp.In Stock: 16955435-1-05-01-00-00-03-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Keystone Electronics 1995-2 is determined by strict equivalence across the following critical parameters:

• Pin diameter: 0.018" (0.46mm) circular
• Overall length: 0.200" (5.08mm)
• Mounting hole diameter: 0.022" (0.56mm)
• Termination method: Press-fit, square
• Mounting configuration: Through hole
• Insulation status: Non-insulated
• Board thickness compatibility: 0.062" (1.57mm)
• Contact finish thickness: 200.0µin (5.08µm)
• Regulatory compliance: ROHS3 and REACH unaffected status

The Mill-Max Manufacturing Corp. 5435-1-05-01-00-00-03-0 qualifies as a substitute based on matching all critical electrical and mechanical parameters. Variations in contact finish composition (tin versus tin-lead) and flange geometry do not affect functional interchangeability within the specified board thickness and termination requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the Keystone Electronics 1995-2 and Mill-Max Manufacturing Corp. 5435-1-05-01-00-00-03-0 maintain active production status with ROHS3 compliance and REACH unaffected certification. Selection between these parts should be based on:

• Availability and lead time requirements
• Contact finish preference (tin versus tin-lead) for specific soldering or environmental conditions
• Packaging format (bulk availability for Mill-Max versus standard packaging for Keystone)
• Supplier inventory levels and cost considerations

Both components satisfy identical mechanical and electrical requirements for 0.062" (1.57mm) board thickness applications with 0.018" (0.46mm) pin diameter through-hole termination.

Frequently Asked Questions (FAQ)

Q: Can the Mill-Max 5435-1-05-01-00-00-03-0 be used as a direct replacement for the Keystone 1995-2?

A: Yes. Both components share identical pin diameter (0.018"), overall length (0.200"), mounting hole diameter (0.022"), termination method (press-fit square), and contact finish thickness (200.0µin). The difference in contact finish composition (tin-lead versus tin) does not affect mechanical interchangeability.

Q: What is the significance of the contact finish difference?

A: The Keystone 1995-2 uses pure tin finish, while the Mill-Max substitute uses tin-lead finish. Both maintain 200.0µin (5.08µm) thickness. Contact finish selection depends on soldering process compatibility and environmental exposure requirements specific to the application.

Q: Are there packaging differences between these parts?

A: The Mill-Max 5435-1-05-01-00-00-03-0 is supplied in bulk packaging, while the Keystone 1995-2 uses standard packaging. Bulk packaging may offer cost advantages for high-volume applications.

Q: Do both parts support the same board thickness?

A: The Keystone 1995-2 is specified for 0.062" (1.57mm) board thickness. The Mill-Max substitute does not explicitly specify board thickness in the provided data, but shares identical mechanical dimensions and termination geometry, making it compatible with the same application requirements.

Q: Are both parts RoHS compliant?

A: Yes. Both the Keystone 1995-2 and Mill-Max 5435-1-05-01-00-00-03-0 are ROHS3 compliant with REACH unaffected status, meeting current environmental and regulatory requirements.