Equivalent & Substitute Parts for Keystone Electronics 1992-2

Part Overview

The Keystone Electronics 1992-2 is a PC pin terminal connector designed for through-hole mounting applications. This non-insulated brass terminal features a 0.018" (0.46mm) circular pin with gold plating and is configured for press-fit, square termination on 0.062" (1.57mm) board thickness. The part maintains active product status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

1992-2

Keystone ElectronicsIn Stock: 9961992-2 Datasheet

Current PartRFQ

5435-0-05-15-00-00-03-0

Mill-Max Manufacturing Corp.In Stock: 107735435-0-05-15-00-00-03-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the Keystone Electronics 1992-2 is determined by strict alignment of the following critical parameters:

• Pin diameter: 0.018" (0.46mm) circular configuration
• Overall length: 0.303" (7.70mm)
• Mounting hole diameter: 0.022" (0.56mm)
• Termination method: Press-fit, square
• Contact material composition: Brass or brass alloy
• Contact finish: Gold plating at 10.0µin (0.25µm) thickness
• Mounting configuration: Through-hole, non-insulated
• Regulatory compliance: ROHS3 and REACH status

The Mill-Max Manufacturing Corp. part 5435-0-05-15-00-00-03-0 satisfies all substitution criteria through identical pin diameter, overall length, mounting hole diameter, termination type, contact finish specification, and regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the Keystone Electronics 1992-2 and Mill-Max Manufacturing Corp. 5435-0-05-15-00-00-03-0 maintain active product status and satisfy ROHS3 and REACH compliance requirements. Selection between these parts may be based on availability, packaging format (Keystone supplied in standard packaging; Mill-Max supplied in bulk), or supply chain considerations. Both parts carry identical MSL 1 ratings and are suitable for unlimited moisture exposure applications. The brass alloy composition of the Mill-Max substitute provides equivalent electrical and mechanical performance to the brass contact material of the primary part.

Frequently Asked Questions (FAQ)

Q: What determines if a PC pin terminal can substitute for the Keystone 1992-2?

A: Substitution requires matching pin diameter (0.018" / 0.46mm), overall length (0.303" / 7.70mm), mounting hole diameter (0.022" / 0.56mm), press-fit square termination, gold contact finish at 10.0µin thickness, and through-hole mounting configuration.

Q: Are brass and brass alloy contact materials interchangeable?

A: Yes. Both materials provide equivalent electrical conductivity and mechanical performance for this terminal application. The contact finish specification (gold plating thickness) is the controlling parameter for electrical interface compatibility.

Q: Does packaging format affect electrical or mechanical compatibility?

A: No. Packaging format (bulk versus standard) does not affect terminal performance. Selection is based on procurement and inventory management requirements.

Q: Are both parts suitable for the same board thickness?

A: The Keystone 1992-2 specifies 0.062" (1.57mm) board thickness. The Mill-Max substitute does not specify board thickness in the provided parameters but maintains identical overall length and mounting hole diameter, supporting compatibility with the same board thickness application.

Q: What is the significance of MSL 1 rating for these terminals?

A: MSL 1 indicates unlimited moisture sensitivity, meaning these terminals require no special moisture control or baking procedures during storage, handling, or assembly.