LAPP 19563200 Hood Connector Bottom Entry M25 HA16 Equivalent & Substitute Parts

Part Overview

The LAPP 19563200 is an EPIC® H-A series heavy duty connector hood designed for bottom entry applications with M25 thread size and HA16 configuration. This connector provides IP65 ingress protection (dust tight, water resistant) and operates across a temperature range of -40°C to 100°C. The part is currently active in production and available in bulk packaging.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part becomes unavailable or when design requirements permit alternative connector architectures within the same functional category.

Substiute Parts

19563200

LAPPIn Stock: 85419563200 Datasheet

Current PartRFQ

19200161751ML

HARTINGIn Stock: 80619200161751ML Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The HARTING 19200161751ML is identified as a substitute based on the following alignment of critical parameters:

Matching Parameters:

• Thread Size: M25 (identical mechanical mounting interface)
• Connector Type: Hood configuration (same connector architecture family)
• Style: Bottom Entry (equivalent cable entry orientation)
• Size Category: 16A (functionally equivalent to HA16 in contact capacity)
• ECCN and HTSUS Classification: Identical regulatory codes (EAR99, 8538.90.8180)

Functional Equivalence: Both connectors operate within heavy duty connector applications and share the same M25 threaded mounting standard. The HARTING part functions as a hood-coupling connector with bottom entry configuration, maintaining compatibility with the same installation methodology as the LAPP original.

Regulatory Alignment: Both parts carry identical export control and tariff classifications, confirming their functional equivalence within the same product category.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection Criteria:

The LAPP 19563200 remains the specified component when the original part number is available and project documentation explicitly references EPIC® H-A series architecture.

The HARTING 19200161751ML serves as a functional substitute when:

• M25 thread mounting compatibility is required
• Bottom entry cable routing is specified
• Hood connector architecture is mandated
• Both parts are active in production status

Compliance Considerations:

Both parts carry identical ECCN (EAR99) and HTSUS (8538.90.8180) classifications, confirming regulatory equivalence for export and tariff purposes. The HARTING part holds ROHS3 compliance and REACH Unaffected status, providing additional environmental certification documentation.

Dimensional Variance:

The height dimension differs between parts (53.00mm versus 42.00mm). Installation space constraints must be evaluated before substitution to ensure the reduced height of the HARTING connector does not conflict with enclosure or panel mounting requirements.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 19200161751ML directly replace the LAPP 19563200 in existing installations?

A: Both connectors share identical M25 thread sizing and bottom entry configuration, enabling mechanical interchangeability. The reduced height of the HARTING part (42.00mm versus 53.00mm) requires verification that available installation space accommodates the substitute without interference.

Q: What determines whether these connectors are substitutable?

A: Substitution eligibility is based on matching thread size (M25), connector type (hood architecture), cable entry style (bottom entry), and size category (HA16/16A equivalent contact capacity). Both parts maintain identical regulatory classifications (EAR99, HTSUS 8538.90.8180).

Q: Are there differences in ingress protection ratings between these parts?

A: The LAPP 19563200 specifies IP65 (dust tight, water resistant). The HARTING 19200161751ML does not provide an ingress protection rating in the available documentation. Applications requiring confirmed IP65 performance should retain the LAPP original specification.

Q: What is the significance of the "Hood - Coupling" designation on the HARTING part?

A: The HARTING connector functions as a cable-to-cable coupling hood, while the LAPP part is designated as a standard hood connector. Both operate within the same heavy duty connector family and share compatible M25 mounting interfaces.

Q: Are both parts available in equivalent quantities?

A: Current inventory shows LAPP 19563200 with 777 pieces in stock and HARTING 19200161751ML with 729 pieces in stock, both in bulk packaging. Availability should be confirmed at time of procurement.

Q: What operating temperature range applies to the HARTING substitute?

A: Operating temperature specification is not provided in the HARTING 19200161751ML documentation. The LAPP original specifies -40°C to 100°C. Applications with defined thermal requirements should reference the LAPP specification or obtain complete thermal data from HARTING before substitution.