LAPP 19448000 Equivalent & Substitute Parts Reference

Part Overview

The LAPP 19448000 is an active heavy duty connector base designed for box mount applications with side entry configuration. This component belongs to the EPIC® H-A series and provides IP65 ingress protection suitable for dust-tight and water-resistant industrial environments. The part is currently in active product status with 927 units in stock.

Equivalent and substitute parts are identified when organizations require alternative sourcing options due to supply chain considerations, inventory availability, or when original manufacturer components are unavailable for new installations or maintenance applications.

Substiute Parts

19448000

LAPPIn Stock: 102219448000 Datasheet

Current PartRFQ

19200100251

HARTINGIn Stock: 71419200100251 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 19448000 is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Base - Box Mount (mechanical form factor)
• Style: Side Entry (cable entry orientation)
• Thread Size: M25 (mechanical interface)
• Ingress Protection Rating: IP65 (environmental sealing)
• Lock Location: Locking Clip on Base Bottom (retention mechanism)

Compatible Variation Parameters:

• Housing Material: Aluminum Alloy or Aluminum Die Cast (both provide equivalent corrosion resistance)
• Housing Finish: Zinc or Powder Coated (both provide surface protection)
• Operating Temperature Range: Substitute may exceed the original range (-40°C ~ 100°C) without creating incompatibility
• Size Designation: HA10 (LAPP) and 10A (HARTING) represent equivalent sizing within their respective series

The HARTING 19200100251 qualifies as a direct substitute based on matching all mandatory parameters while maintaining functional equivalence in environmental protection and mechanical installation requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection - LAPP 19448000: Select the original LAPP 19448000 when the specific EPIC® H-A series integration is required or when the exact dimensional specifications (84.00mm length, 57.00mm height) are mandated by existing installation geometry.

Substitute Selection - HARTING 19200100251: The HARTING 19200100251 qualifies as a functional equivalent when:

• Supply of the original LAPP component is unavailable
• The installation can accommodate the reduced dimensions (74.40mm length, 52.00mm height)
• The Han® A series connector interface is compatible with existing mated components
• RoHS3 compliance documentation is required for the application
• Extended operating temperature capability (-40°C ~ 125°C) provides operational margin

Both components maintain active product status and are currently in stock. The HARTING substitute provides documented RoHS3 compliance and REACH unaffected status, which may be required for specific regulatory or customer requirements.

Frequently Asked Questions (FAQ)

Q: Can HARTING 19200100251 be directly installed in place of LAPP 19448000?

A: The HARTING 19200100251 is mechanically compatible for box mount installation with M25 thread interface and side entry cable routing. However, dimensional differences exist: the HARTING component is 9.6mm shorter in length and 5mm shorter in height. Verify that the installation enclosure and mating connector geometry accommodate these reduced dimensions before substitution.

Q: What are the critical parameters that must match for substitution?

A: Substitution requires matching: Connector Type (Base - Box Mount), Style (Side Entry), Thread Size (M25), Ingress Protection Rating (IP65), and Lock Location (Locking Clip on Base Bottom). These parameters determine mechanical installation compatibility and environmental sealing performance.

Q: Does the HARTING substitute provide equivalent environmental protection?

A: Yes. Both components provide IP65 ingress protection with dust-tight and water-resistant sealing. The HARTING component uses powder-coated aluminum die cast housing versus the LAPP zinc-finished aluminum alloy housing. Both finishes provide equivalent corrosion resistance for industrial applications.

Q: Are there compliance differences between the two components?

A: The HARTING 19200100251 provides documented RoHS3 compliance and REACH unaffected status. The LAPP 19448000 specifications do not include these compliance certifications in the provided data. If regulatory compliance documentation is required, the HARTING component provides explicit certification.

Q: What is the impact of the dimensional differences?

A: The HARTING substitute is 9.6mm shorter in length and 5mm shorter in height. These differences may affect fitment in space-constrained enclosures or installations where the original dimensions were specifically selected. Verify enclosure geometry and mating connector positioning before substitution.

Q: Can both components be used interchangeably in new designs?

A: Both components are active products suitable for new installations. Selection should be based on series preference (EPIC® H-A versus Han® A), dimensional requirements, compliance documentation needs, and supplier availability. The HARTING component's extended operating temperature range (-40°C ~ 125°C) provides additional thermal margin compared to the LAPP specification (-40°C ~ 100°C).

Q: What is the difference between HA10 and 10A size designations?

A: HA10 is the LAPP EPIC® H-A series size designation, while 10A is the HARTING Han® A series equivalent. Both designations represent equivalent connector sizing within their respective manufacturer series and are functionally compatible for the specified M25 thread interface and side entry configuration.