Phoenix Contact 1933215 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1933215 is a 5-position terminal block header with male pins, designed for vertical through-hole mounting with 5.00mm pitch spacing. This component is part of the COMBICON PST series and is actively manufactured. The part is RoHS3 compliant and rated for 12A at 400V (IEC) or 16A at 300V (UL). Finding equivalent substitute parts may be necessary due to supply chain considerations, lead time requirements, or design flexibility in component sourcing.

Substiute Parts

1933215

Phoenix ContactIn Stock: 11171933215 Datasheet

Current PartRFQ

OSTOP050000

On Shore Technology Inc.In Stock: 1731OSTOP050000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1933215 is determined by the following critical parameters:

• Position Count & Pitch: 5 positions at 0.197" (5.00mm) spacing
• Connector Type: Male pin header, unshrouded configuration
• Mounting Method: Through-hole solder termination
• Electrical Performance: Voltage and current ratings suitable for the application
• Physical Compatibility: Contact tail length and insulation height must accommodate PCB design
• Regulatory Compliance: RoHS3 compliance and MSL rating

The On Shore Technology Inc. OSTOP050000 meets these core substitution criteria with identical position count, pitch, orientation, and through-hole solder mounting. Both parts maintain RoHS3 compliance and MSL 1 rating.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1933215 and On Shore Technology OSTOP050000 are active products with current manufacturing status. Selection between these parts should be based on:

• Supply Availability: The OSTOP050000 currently has 1638 pieces in stock versus 1100 pieces for the 1933215
• Regulatory Compliance: Both parts maintain RoHS3 compliance and REACH unaffected status, suitable for regulated applications
• Electrical Ratings: The Phoenix Contact part specifies 12A at 400V (IEC) and 16A at 300V (UL). The OSTOP050000 specifies 300V (UL) with IEC current rating not provided in available data
• Physical Dimensions: Both parts share identical contact tail length (0.138") and pitch (5.00mm), ensuring PCB footprint compatibility
• Moisture Sensitivity: Both parts carry MSL 1 rating, indicating unlimited shelf life under standard conditions

Frequently Asked Questions (FAQ)

Q: Can the On Shore Technology OSTOP050000 directly replace the Phoenix Contact 1933215 in existing designs?

A: Yes, for applications requiring 300V UL rating. Both parts share identical pitch (5.00mm), position count (5), orientation (vertical), contact tail length (0.138"), and through-hole solder termination. Verify that your application does not require the IEC 12A at 400V specification, as the OSTOP050000 IEC current rating is not specified in available documentation.

Q: What are the key parameters that determine substitution compatibility?

A: The critical parameters are: 5-position count, 0.197" (5.00mm) pitch, vertical orientation, male pin unshrouded type, through-hole solder mounting, 0.138" contact tail length, and tin contact finish. Both parts meet these specifications.

Q: Are there any differences in housing material between these parts?

A: Yes. The Phoenix Contact 1933215 uses polyamide (PA) nylon housing, while the On Shore Technology OSTOP050000 uses brass housing. This difference does not affect electrical compatibility but may influence mechanical properties and environmental resistance in specific applications.

Q: Do both parts meet the same regulatory requirements?

A: Both parts are RoHS3 compliant, REACH unaffected, classified as EAR99, and carry the same HTSUS code (8536.69.4040). Both have MSL 1 rating with unlimited shelf life. They are suitable for regulated applications with identical compliance profiles.

Q: What is the difference in insulation height between these parts?

A: The Phoenix Contact 1933215 has an insulation height of 0.079" (2.00mm), while the On Shore Technology OSTOP050000 has 0.138" (4.60mm). This difference may affect clearance considerations in compact PCB layouts.