TE Connectivity AMP Connectors 1-92009-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-92009-1 is an 11-position rectangular connector receptacle housing with a 0.098" (2.50mm) pitch. This component functions as a receptacle housing for female socket contacts in single-row configurations and is designed for free-hanging, in-line mounting applications. The part is classified as Active product status with full RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

1-92009-1

TE Connectivity AMP ConnectorsIn Stock: 7621-92009-1 Datasheet

Current PartRFQ

0050375113

MolexIn Stock: 42590050375113 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 1-92009-1 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle
• Contact Type: Female Socket
• Number of Positions: 11
• Pitch: 0.098" (2.50mm)
• Number of Rows: 1
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Insulation Material: Polyamide (PA), Nylon

Acceptable Variation Parameters:

• Operating Temperature Range: Substitute may exceed the original range
• RoHS Status: Both RoHS2 and RoHS3 compliance are acceptable
• Fastening Type: Variations permitted if not specified in original part
• Packaging: Variations permitted (Bulk vs. standard packaging)

The Molex 0050375113 satisfies all mandatory matching parameters and is therefore classified as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 1-92009-1 Selection Criteria:

• Primary choice when TE Connectivity AMP Connectors series compatibility is required
• Suitable for applications operating within -25°C to 105°C temperature range
• RoHS Compliant status meets standard environmental regulations
• Unlimited moisture sensitivity rating appropriate for standard industrial environments

Molex 0050375113 Selection Criteria:

• Direct substitute when TE Connectivity 1-92009-1 is unavailable
• Extended operating temperature range (-55°C to 105°C) supports low-temperature applications beyond the original part specification
• ROHS3 Compliant status meets current and future regulatory requirements
• Locking Ramp fastening type provides additional mechanical retention feature
• Mini-SPOX 5264 series designation indicates Molex connector family compatibility
• Higher inventory availability (4185 pcs) supports rapid procurement

Both parts maintain Active product status and are suitable for new design implementations. Selection between these parts should be based on manufacturer preference, supply availability, and specific application temperature requirements.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0050375113 be used as a direct replacement for the TE Connectivity 1-92009-1?

A: Yes. The Molex 0050375113 is a direct substitute. Both parts share identical electrical and mechanical specifications: 11-position receptacle housing, 0.098" (2.50mm) pitch, single-row configuration, female socket contacts, crimp termination, and polyamide nylon insulation material. Both are Active products with RoHS compliance and unlimited moisture sensitivity rating.

Q: What is the difference in operating temperature ranges between these parts?

A: The TE Connectivity 1-92009-1 operates from -25°C to 105°C. The Molex 0050375113 operates from -55°C to 105°C. The Molex part extends the lower temperature limit by 30°C, making it suitable for cryogenic or extreme cold-weather applications where the TE Connectivity part would not be rated.

Q: Are there packaging differences between these substitute parts?

A: Yes. The TE Connectivity 1-92009-1 packaging is not specified in the product data. The Molex 0050375113 is supplied in Bulk packaging. Packaging differences do not affect electrical or mechanical compatibility and are relevant only for procurement and inventory management.

Q: What does the Locking Ramp fastening type on the Molex part provide?

A: The Locking Ramp fastening type on the Molex 0050375113 provides mechanical retention and positive locking engagement. The TE Connectivity 1-92009-1 does not specify a fastening type. This feature on the Molex part enhances connector security in applications subject to vibration or mechanical stress.

Q: Do both parts require separate contact purchases?

A: Yes. Both the TE Connectivity 1-92009-1 and Molex 0050375113 are housings only. Contacts are not included with either part and must be purchased separately. Ensure that selected contacts are compatible with the 0.098" (2.50mm) pitch and crimp termination specification.

Q: Are there REACH or ECCN compliance differences?

A: The TE Connectivity 1-92009-1 lists REACH status as Vendor Undefined. The Molex 0050375113 lists REACH status as REACH Unaffected. Both parts share the same ECCN classification (EAR99). For applications requiring specific REACH compliance documentation, contact the respective manufacturers for current certification status.