Phoenix Contact 1914836 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1914836 is a 3-position terminal block plug with female sockets, 5mm pitch, designed for free-hanging in-line applications. This component features screw-type rising cage clamp termination and is rated for 12A (IEC) / 15A (UL) operation. The part is currently active in production with 786 units in stock. Equivalent substitute parts are identified when they maintain functional compatibility across critical electrical and mechanical parameters while meeting the same application requirements.

Substiute Parts

1914836

Phoenix ContactIn Stock: 8201914836 Datasheet

Current PartRFQ

0395205003

MolexIn Stock: 22170395205003 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1914836 is determined by strict alignment of the following critical parameters:

• Pitch and Position Count: 5mm (0.197") pitch with 3 positions per level
• Connector Type: Plug configuration with female sockets
• Wire Entry Orientation: 180° free-hanging in-line entry
• Termination Method: Screw-type rising cage clamp
• Electrical Ratings: Minimum 12A (IEC) or 15A (UL) current capacity; 300V minimum voltage rating
• Wire Gauge Compatibility: Support for 12-30 AWG (0.2-2.5mm²) conductors
• Mechanical Dimensions: Matching insulation height of 15mm
• Regulatory Compliance: RoHS compliance and equivalent flammability ratings

The Molex 0395205003 meets these substitution criteria across all critical parameters, enabling direct functional replacement in applications requiring 3-position, 5mm-pitch terminal block plugs with screw termination.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0395205003 is a direct functional equivalent to the Phoenix Contact 1914836 for applications requiring 3-position, 5mm-pitch terminal block plugs with screw termination. Both components are active products with current production status and full RoHS compliance. The Molex substitute provides equivalent electrical performance with a higher UL current rating (18A vs. 15A), making it suitable for the same or more demanding applications. Both parts maintain identical mechanical compatibility, wire gauge support, and connector orientation. Selection between these parts should be based on availability, supply chain requirements, and design documentation specifications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0395205003 directly replace the Phoenix Contact 1914836 in existing designs?

A: Yes. Both components share identical pitch (5mm), position count (3), connector type (plug with female sockets), wire entry orientation (180°), termination method (screw rising cage clamp), and mechanical dimensions (15mm insulation height). They are mechanically and electrically interchangeable for applications within the specified electrical ratings.

Q: Are there differences in wire gauge compatibility?

A: Both parts support 12-30 AWG wire gauges. The Phoenix Contact 1914836 specifies 0.2-2.5mm² range, while the Molex 0395205003 does not specify the metric equivalent in the provided data. Both accommodate the same AWG range, ensuring wire termination compatibility.

Q: What is the difference in current ratings?

A: The Phoenix Contact 1914836 is rated for 15A (UL) and 12A (IEC). The Molex 0395205003 is rated for 18A (UL). The Molex part has a higher current capacity, making it suitable for applications at or below the Phoenix Contact ratings.

Q: Do both parts meet the same regulatory standards?

A: Both parts are RoHS compliant. The Phoenix Contact 1914836 carries RoHS Compliant status, while the Molex 0395205003 carries ROHS3 Compliant status. Both meet current regulatory requirements. The Molex part also carries REACH Unaffected status.

Q: Are there differences in screw torque specifications?

A: The Phoenix Contact 1914836 specifies 0.5-0.6 Nm (4.4-5.3 Lb-In) torque. The Molex 0395205003 specifies 0.56 Nm (5.0 Lb-In). These values are within the same range and represent equivalent termination requirements.

Q: What is the difference in wire strip length?

A: The Phoenix Contact 1914836 specifies 7mm wire strip length, while the Molex 0395205003 specifies 6.5mm. This minor difference does not affect functional compatibility but should be considered during assembly and termination procedures.