Phoenix Contact 1913439 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1913439 is a 6-position terminal block plug with female sockets, 0.300" (7.62mm) pitch, designed for 180° free-hanging in-line applications. This component features screw-rising cage clamp termination and tin-plated contacts rated for 10 A at 300 V (UL). The part is classified as obsolete, making identification of active equivalent models essential for procurement and system continuity.

Substiute Parts

1913439

Phoenix ContactIn Stock: 8231913439 Datasheet

Current PartRFQ

1812791

Phoenix ContactIn Stock: 10891812791 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Phoenix Contact 1812791 qualifies as a direct substitute for the 1913439 based on the following critical parameters:

• Same manufacturer (Phoenix Contact) and series (COMBICON GMSTB)
• Identical number of positions (6) and pitch (0.300"/7.62mm)
• Matching connector type (plug with female sockets)
• Identical termination method (screw-rising cage clamp)
• Identical mounting configuration (free hanging, in-line)
• Compatible wire gauge range (12-30 AWG, 0.2-2.5mm²)
• Tin-plated contact finish (identical)
• Green housing color (identical)

The 1812791 represents an active product status replacement, with enhanced electrical ratings and additional features including ejector latches and retention latches.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1812791 is the direct active equivalent for the obsolete 1913439. Selection of the 1812791 is supported by:

• Identical mechanical and electrical interface parameters (pitch, position count, termination method, mounting configuration)
• Active product status ensuring ongoing availability and supply chain continuity
• Enhanced electrical performance (18.5 A UL vs. 10 A; 600 V UL vs. 300 V; 16 A IEC; 1 kV IEC)
• UL94 V-0 material flammability rating certification
• RoHS compliance status
• Backward compatibility with existing connector interfaces

The 1812791 accommodates the full wire gauge range of the original part and maintains identical contact finish and housing color specifications.

Frequently Asked Questions (FAQ)

Q: Can the 1812791 directly replace the 1913439 in existing applications?

A: Yes. Both parts share identical pitch (0.300"/7.62mm), position count (6), connector type (plug with female sockets), termination method (screw-rising cage clamp), and mounting configuration (free hanging, in-line). The 1812791 provides enhanced electrical ratings and is actively manufactured.

Q: What are the key differences between these parts?

A: The 1812791 offers higher current capacity (18.5 A UL vs. 10 A), higher voltage rating (600 V UL vs. 300 V), IEC ratings (16 A, 1 kV), UL94 V-0 flammability certification, RoHS compliance, and additional retention features (ejector latches, retention latches). Insulation height increases from 15.00mm to 17.50mm.

Q: Are there packaging differences?

A: The 1913439 packaging is not specified. The 1812791 is supplied in bulk packaging.

Q: Does the increased insulation height of the 1812791 affect compatibility?

A: The insulation height difference (15.00mm vs. 17.50mm) must be evaluated within the specific application context. Mechanical clearance in the mating cavity should be verified.

Q: Is the 1812791 RoHS compliant?

A: Yes, the 1812791 is RoHS compliant. The 1913439 RoHS status is not specified.

Q: What wire gauges are supported?

A: Both parts support 12-30 AWG wire gauge. The 1812791 specifies a broader range in metric units (0.2-2.5mm²) compared to the 1913439 (2.5mm²).