Phoenix Contact 1912867 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1912867 is a 4-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 270° free-hanging in-line applications. This component is part of the COMBICON MVSTBW series and is currently active in production. Finding equivalent substitute parts is necessary to ensure supply chain flexibility, optimize inventory management, and maintain design compatibility across manufacturing batches and procurement cycles.

Substiute Parts

1912867

Phoenix ContactIn Stock: 7871912867 Datasheet

Current PartRFQ

OSTTS04515A

On Shore Technology Inc.In Stock: 5785OSTTS04515A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1912867 is determined by the following critical parameters:

• 4-position configuration with female sockets
• 0.200" (5.08mm) pitch spacing
• Free-hanging in-line mounting orientation
• Screw-based termination method
• UL94 V-0 flammability rating
• Wire gauge compatibility: 12-30 AWG (0.2-2.5mm²)
• Voltage rating minimum: 300 V (UL standard)
• Current rating minimum: 16 A (IEC standard)

The On Shore Technology Inc. OSTTS04515A meets these core substitution criteria. Both components share identical position count, pitch, mounting type, and flammability classification. Wire gauge ranges overlap within the 0.34-2.5mm² specification of the substitute part, which covers the primary operating range of the main part. Both maintain active product status and comply with applicable regulatory standards.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1912867 and On Shore Technology OSTTS04515A are active production components with equivalent core functionality for 4-position, 5.08mm pitch terminal block applications. Selection between these parts should be based on:

Regulatory Compliance: Both components meet UL94 V-0 flammability requirements and maintain active product status. The On Shore Technology part carries ROHS3 compliance, while the Phoenix Contact part is RoHS Compliant. Both are suitable for applications requiring regulatory certification.

Wire Gauge Compatibility: The Phoenix Contact part accommodates 12-30 AWG (0.2-2.5mm²), while the On Shore Technology substitute supports 12-24 AWG (0.34-2.5mm²). Applications using wire gauges smaller than 0.34mm² or larger than 24 AWG require the Phoenix Contact part.

Electrical Ratings: Both components are rated for 300 V (UL standard). The Phoenix Contact part additionally specifies 630 V (IEC standard) and 16 A (IEC current), providing extended rating documentation for international applications.

Availability and Inventory: Selection may be influenced by stock levels and procurement lead times from respective manufacturers.

Frequently Asked Questions (FAQ)

Q: Can the On Shore Technology OSTTS04515A directly replace the Phoenix Contact 1912867 in all applications?

A: Direct substitution is valid for applications using wire gauges between 12-24 AWG (0.34-2.5mm²). Applications requiring support for wire gauges smaller than 0.34mm² or larger than 30 AWG require the Phoenix Contact part.

Q: Are the screw termination methods compatible between these two parts?

A: Both parts use screw-based termination. The Phoenix Contact part specifies a rising cage clamp mechanism with M3 screw and 0.5-0.6 Nm torque specification. The On Shore Technology part specifies screw termination with 0.4 Nm torque. Mechanical interface compatibility should be confirmed for specific connector housing applications.

Q: What are the voltage rating differences between these components?

A: Both parts are rated for 300 V under UL standards. The Phoenix Contact part additionally documents 630 V under IEC standards. For applications requiring IEC certification or operating at voltages above 300 V, the Phoenix Contact part is specified.

Q: Do both parts meet current RoHS requirements?

A: Yes. The Phoenix Contact 1912867 is RoHS Compliant. The On Shore Technology OSTTS04515A is ROHS3 Compliant. Both meet current regulatory requirements for restricted substance compliance.

Q: What is the wire strip length difference, and does it affect installation?

A: The Phoenix Contact part specifies 7mm wire strip length. The On Shore Technology part specifies 6-7mm. This minor difference may affect wire preparation procedures depending on specific connector housing design and installation tooling.

Q: Are these parts available in the same packaging format?

A: Both parts are supplied in bulk packaging. Specific packaging quantities and reel specifications should be confirmed with respective manufacturers or authorized distributors.